Infinity Kappa 52.5I Manual

Infinity Bilhøjttaler Kappa 52.5I

Læs gratis den danske manual til Infinity Kappa 52.5I (4 sider) i kategorien Bilhøjttaler. Denne vejledning er vurderet som hjælpsom af 26 personer og har en gennemsnitlig bedømmelse på 3.5 stjerner ud af 13.5 anmeldelser. Har du et spørgsmål om Infinity Kappa 52.5I, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/4

kappa series

42.5i,52.5i,62.5i,63.5i,

652.5i,692.5i,693.5i,

32.5cf,462.5cfp,572.5cf

Thank you for purchasing Infinity’s Kappa Series

multi-element automotive loudspeakers. We’ve organized this

manual to make their installation as simple and trouble-free as

possible. Please read it thoroughly before proceeding. Remember

to keep your sales receipt with this manual in a safe place so

both are available for future reference.

instructions

- 2 -

ABOUT THESE INSTRUCTIONS

Installation of automotive stereo components

can require extensive experience with a

variety of mechanical and electrical procedures.

Although these instructions explain how to install

Kappa Series multi-element speakers in a general

sense, they do not show the exact installation

methods for your particular vehicle. If you do

not feel you have the experience, do not attempt

the installation yourself, but instead ask your

authorized Infinity car audio dealer about

professional installation options.

LOUD MUSIC AND HEARING

Playing loud music in an automobile can hinder

your ability to hear traffic as well as permanently

damage your hearing. The maximum volume lev-

els achievable with Infinity speakers, combined

with high power amplification, may exceed safe

levels for extended listening. We recommend

using low volume levels when driving. Infinity

accepts no liability for hearing loss, bodily injury,

or property damage as a result of use or misuse

of this product.

REAR DECK PRECAUTION

In some cars, fuel tanks may be located directly

beneath the rear deck. Before installation, make

sure there is adequate speaker basket clearance

before considering this location!

ABOUT THE CROSSOVER

Except for the 462.5cfp, each Kappa Series multi-

element speaker includes a crossover for in-line

connection to an amplifier output and is required

for proper operation (see Figure 7 on the next

page). The attached crossover wires are keyed and

color-coded to aid in correct polarity connections.

Do not omit the crossover or substitute another

one – doing so will damage the speaker.

INSTALLATION TIPS

• Always wear protective eyewear when using

any tools.

• Turn off all audio components and other

electrical devices before you start. Disconnect

the (–) negative lead from your vehicle’s battery.

• Keep speakers in their package until final

installation. When moving a speaker, always

rest it with the cone or dome facing up. Never

use force to install any speaker.

• Check clearances on both sides of a planned

mounting surface before drilling any holes or

installing any screws. Remember that the

screws can extend behind the surface.

• At the installation sites, locate and make a

note of all fuel lines, hydraulic brake lines,

vacuum lines and electrical wiring. Use

extreme caution when cutting or drilling in

and around these areas.

• Before drilling or cutting holes, use a utility

knife to remove unwanted fabric or vinyl,

to keep material from snagging in a drill bit

or saw.

• For door installations, check the clearance

with the windows throughout the range of the

window’s travel, and verify that a mounted

speaker will not interfere with the window

crank or power window mechanism.

• If mounting speakers elsewhere, check for

clearance around rear deck torsion bars, glove

box or other structural elements.

• Do not mount speakers where they will get wet.

Figure 1. Mounting the 42.5i, 52.5i, 62.5i, 63.5i,

692.5i, 693.5i, 32.5cf or 572.5cf.

NOTE:The 32.5cf, 462.5cfp and 572.5cf speakers

are designed to be installed under factory grilles.

Consequently, no grilles are packaged with

these models.

NOTE: If you are mounting the 572.5cf in a 6" x 8"

location, use the adapter provided.

Figure 2. Modifying the 42.5i to be installed in

locations requiring fewer than 4 mounting “ears”.

(The 62.5i and 63.5i may be similarly modified.)

NOTE: Grip the tab with pliers and bend to detach

it from the speaker.

ROTATE TWEETER SO IT

IS ANGLED TOWARD

THE LISTENER USING

THE UNIPIVOT™

(patent no. 6,002,780)

FEATURE ON THE 52.5i,

62.5i, 652.5i, 572.5cf

AND 692.5i.

INSTALLATION ARNINGS ANDW TIPS INSTALLATION

Produkt Specifikationer

Mærke:	Infinity
Kategori:	Bilhøjttaler
Model:	Kappa 52.5I

Har du brug for hjælp?

Hvis du har brug for hjælp til Infinity Kappa 52.5I stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Bilhøjttaler Infinity Manualer

Infinity Reference 5030cs Manual

23 Juli 2025

Infinity Kappa Perfect 6.1 Manual

23 Juli 2025

Infinity Reference 6520cs Manual

23 Juli 2025

Infinity Reference 5000cs Manual

23 Juli 2025

Infinity Reference 505cs Manual

23 Juli 2025

Infinity Reference 5010cs Manual

23 Juli 2025

Infinity Kappa CS-4 MKII Manual

22 Juli 2025

Infinity Reference 6520Scs Manual

22 Juli 2025

Infinity Reference RS 400 Manual

22 Juli 2025

Infinity Reference 6412CFP Manual

22 Juli 2025

Bilhøjttaler Manualer

Nyeste Bilhøjttaler Manualer

Pioneer TS-W261D4 Manual

15 August 2025

Philips TAC7306 Manual

15 August 2025

Pioneer TS-W261S4 Manual

14 August 2025

Hertz SPL Show SV 165 NEO Manual

13 August 2025

Hertz SPL SV 200L Manual

12 August 2025

Audiofrog GB10CF Manual

12 August 2025

Hertz SPL Show ST 25A NEO Manual

12 August 2025

Sony XS-N1640 Manual

9 August 2025

Sony XS-N1620C Manual

9 August 2025

Pioneer TS-165P Manual

5 August 2025