Infinity Kappa Perfect 6.1 Manual

Infinity Bilhøjttaler Kappa Perfect 6.1

Læs gratis den danske manual til Infinity Kappa Perfect 6.1 (4 sider) i kategorien Bilhøjttaler. Denne vejledning er vurderet som hjælpsom af 3 personer og har en gennemsnitlig bedømmelse på 4.7 stjerner ud af 2 anmeldelser. Har du et spørgsmål om Infinity Kappa Perfect 6.1, eller vil du spørge andre brugere om produktet?

Side 1/4
Thank you for purchasing an Innity Kappa Perfect compo-
nent system. The Kappa Perfect6.1 has been engineered to provide
the most accurate sonic reproduction possible. Over the years, we
at Innity have listened to hundreds of automotive speakers and we
think these are the best. We hope you agree.
This manual includes information that will make your installation
as simple and trouble-free as possible. It also provides detailed tech-
nical information that will help an experienced installer optimize
speaker placement and crossover adjustment. Please study this
your warranty registration card, and keep your sales receipt some-
where safe in case you need warranty service.
®
KA P PA SE R I E S
6.5" Component System
I N S T R U C T I O N S
6.1
IMPORTANT
Installation of automotive stereo compo-
nents can require extensive experience per-
forming a variety of mechanical and electri-
cal procedures. Although these instructions
explain how to install a Kappa Perfect6.1
component system in a general sense, they
do not show the exact installation method
for your particular car. If you feel you may
not have the necessary tools or experience,
ask your authorized Innity car-audio dealer
about professional installation options.
WARNING
Playing loud music in your automobile
can permanently damage your hearing as
well as hinder your ability to hear trac. We
recommend listening at low volume while
driving. Innity accepts no liability for hear-
ing loss, bodily injury or property damage
resulting from use or misuse of this product.
S PPEAKER LACEMENT
Figures 14 show possible speaker place-
ments in the order of most desirable to
least desirable. Kick-panel mounting will
provide the best staging and imaging in
most vehicles.
A NOTE A S PBOUT YSTEM ERFORMANCE
For the best performance possible, the
Kappa Perfect6.1 should be used with a
two-channel amplier with output power of
at least 35W RMS per channel. The passive
crossover contains impedance-compensating
circuitry and has been computer-optimized
for the attest possible frequency response
with the tweeter ush-mounted on axis
with the listener. The combined responses
of the speakers and passive crossover
constitute 4th-order Linquitz-Riley
acoustic
alignment and cannot be duplicated
with
any electronic crossover currently available
for car-audio use. Consequently, bi-amping
the Perfect6.1 with an electronic crossover
is not recommended.
T IWEETER NSTALLATION
TWEETER
on dash
WOOFER
in factory-
door location
TWEETER
on kick panel
WOOFER
in factory-
door location
TWEETER
and
WOOFER
on kick panel
WOOFER
in factory-
door location
TWEETER
in high/forward
location on door
Figure 1.
Mounting the woofer and tweeter in
the kick panels
Figure 2.
Mounting the woofer in the door and
the tweeter in the kick panel
Figure 3.
Mounting the woofer and tweeter in
the doors
Figure 4.
Mounting the woofer in the door and
the tweeter in the dash
1
2
+
1
2
Figure 5.
Surface-mounting the tweeter
Figure 6.
Flush-mounting the tweeter


Produkt Specifikationer

Mærke: Infinity
Kategori: Bilhøjttaler
Model: Kappa Perfect 6.1

Har du brug for hjælp?

Hvis du har brug for hjælp til Infinity Kappa Perfect 6.1 stil et spørgsmål nedenfor, og andre brugere vil svare dig