Infinity Kappa 680.7cs Manual

Infinity Bilhøjttaler Kappa 680.7cs

Læs gratis den danske manual til Infinity Kappa 680.7cs (4 sider) i kategorien Bilhøjttaler. Denne vejledning er vurderet som hjælpsom af 37 personer og har en gennemsnitlig bedømmelse på 4.4 stjerner ud af 19 anmeldelser. Har du et spørgsmål om Infinity Kappa 680.7cs, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/4

kappa series

50.7cs,60.7cs,65.7cs,680.7cs

THANK YOU for purchasing Infinity’s Kappa®

Series automotive loudspeaker components.

We’ve organized this manual to make their

installation as simple and trouble-free as possible.

Please read it thoroughly before proceeding.

Remember to keep your sales receipt with this

manual in a safe place so both are available for

future reference.

ABOUT THESE INSTRUCTIONS

Installation of automotive stereo components

can require extensive experience with a variety

of mechanical and electrical procedures. Although

these instructions explain how to install Kappa

Series Component Systems in a general sense, they

do not show the exact installation methods for your

particular vehicle. If you do not feel you have the

experience, do not attempt the installation yourself,

but instead ask your authorized Infinity car audio

dealer about professional installation options.

LOUD MUSIC AND HEARING

Playing loud music in an automobile can hinder

your ability to hear traffic, as well as permanently

damage your hearing. The maximum volume lev-

els achievable with Infinity speakers, combined

with high power amplification, may exceed safe

levels for extended listening. We recommend

using low volume levels when driving. Infinity

accepts no liability for hearing loss, bodily injury,

or property damage as a result of use or misuse

of this product.

REAR DECK PRECAUTION

In some cars, fuel tanks may be located directly

beneath the rear deck. Before installation, make

sure there is adequate speaker basket clearance

before considering this location!

ABOUT THE CONTENTS

The Kappa Component System includes:

• 5 -1 ⁄4" or 6 -1 ⁄ 2" or 165mm or 6" x 8" woofer

• Grille and mounting adaptor(s)

• 1" Tweeter with surface/flush I-Mount™

(patent no. 5,859,917) kits

• Crossover network with mounting screws

Note: The supplied crossover network is optimized

for each specific speaker system it is packaged

with. Do not substitute another crossover network

or use other speakers when connecting the system

(see Figure 8A).

INSTALLATION TIPS

• Always wear protective eyewear when using

any tools.

• Turn off all audio components and other

electrical devices before you start. Disconnect

the (–) negative lead from your vehicle’s battery.

• Keep speakers in their package until final

installation. When moving a speaker, always

rest it with the cone or dome facing up. Never

use force to install any speaker.

• Check clearances on both sides of a planned

mounting surface before drilling any holes or

installing any screws. Remember that the

screws can extend behind the surface.

• At the installation sites, locate and make a

note of all fuel lines, hydraulic brake lines,

vacuum lines and electrical wiring. Use

extreme caution when cutting or drilling

in and around these areas.

• Before drilling or cutting holes, use a utility

knife to remove unwanted fabric or vinyl,

to keep material from snagging in a drill

bit or saw.

• For door installations, check the clearance

with the windows throughout the range of the

window’s travel, and verify that a mounted

speaker will not interfere with the window

crank or power window mechanism.

• If mounting speakers elsewhere, check for

clearance around rear deck torsion bars,

glove box or other structural elements.

• Do not mount speakers where they will get wet.

• If possible, select a mounting site for the

crossover network that is near the speakers

and provides easy access for connections.

Figure 1. Mounting the 50.7cs woofer with

the grille.

Figure 2. Mounting the 60.7cs woofer with

the grille.

Note: The 680.7cs is designed to replace 5" x 7"

and 6" x 8" speakers installed behind existing

vehicle grilles, and does not include grilles.

INSTALLATION ARNINGS AND IPSW T INSTALLATION

Produkt Specifikationer

Mærke:	Infinity
Kategori:	Bilhøjttaler
Model:	Kappa 680.7cs

Har du brug for hjælp?

Hvis du har brug for hjælp til Infinity Kappa 680.7cs stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Bilhøjttaler Infinity Manualer

Infinity Reference 5030cs Manual

23 Juli 2025

Infinity Kappa Perfect 6.1 Manual

23 Juli 2025

Infinity Reference 6520cs Manual

23 Juli 2025

Infinity Reference 5000cs Manual

23 Juli 2025

Infinity Reference 505cs Manual

23 Juli 2025

Infinity Reference 5010cs Manual

23 Juli 2025

Infinity Kappa CS-4 MKII Manual

22 Juli 2025

Infinity Reference 6520Scs Manual

22 Juli 2025

Infinity Reference RS 400 Manual

22 Juli 2025

Infinity Reference 6412CFP Manual

22 Juli 2025

Bilhøjttaler Manualer

Nyeste Bilhøjttaler Manualer

Pioneer TS-W261D4 Manual

15 August 2025

Philips TAC7306 Manual

15 August 2025

Pioneer TS-W261S4 Manual

14 August 2025

Hertz SPL Show SV 165 NEO Manual

13 August 2025

Hertz SPL SV 200L Manual

12 August 2025

Audiofrog GB10CF Manual

12 August 2025

Hertz SPL Show ST 25A NEO Manual

12 August 2025

Sony XS-N1640 Manual

9 August 2025

Sony XS-N1620C Manual

9 August 2025

Pioneer TS-165P Manual

5 August 2025