Insignia NS-PWRD3C6 Manual

Insignia Vægudtag NS-PWRD3C6

Læs gratis den danske manual til Insignia NS-PWRD3C6 (2 sider) i kategorien Vægudtag. Denne vejledning er vurderet som hjælpsom af 5 personer og har en gennemsnitlig bedømmelse på 4.1 stjerner ud af 3 anmeldelser. Har du et spørgsmål om Insignia NS-PWRD3C6, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/2

PACKAGE CONTENTS

• Mountable Desktop Power Station

• C-clamp with optional rubber pad

• Quick Setup Guide

FEATURES

• Three AC outlets power multiple devices at the same time

• USB-C port provides up to 18 W with Power Delivery 3.0 to charge

smartphones, tablets, and other mobile devices

• Two USB-A charging ports provide up to 2.4 A total for devices that charge

with a standard USB connection

• 900 joules of protection safeguards your connected devices against power surges

• C-clamp secures your power station to a desk or table

• 6 ft. (1.8 m) power cord length oers exible placement options

Before using your new product, please read these instructions to prevent any damage.

QUICK SETUP GUIDE

Mountable Desktop

Power Station

NS-PWRD3C6

Surge

protection

LED indicator

USB‐A charging

ports (2)

USB‐C power delivery charging port (1)

Note: You can’t use the USB ports as a USB hub.

Your power station doesn’t transfer data.

AC outlets

C-clamp

Groove

Power cord

(permanently attached)

ATTACHING YOUR POWER STATION TO A DESK

1 Align the bottom grooves on your power station with the top of the

C-clamp, then slide the C-clamp into the grooves. When the C-clamp is fully

inserted, you hear a click.

Mounting screw

Mounting foot

Mounting

screw knob

2 Slide the C-clamp and power station onto the edge of the desk. Make sure

that the back of the C-clamp touches the desk edge.

3 (Optional) To protect against surface scratching, insert an included rubber

pad between the mounting foot and the table.

4 Turn the mounting screw knob counterclockwise to securely tighten the

C-clamp to the desk.

TROUBLESHOOTING

If the protected LED indicator doesn’t light, the power station is no longer

protected from surge. Replace the power station. The power station may have

received a power surge or spike beyond its specied limits that overloaded the

protection circuitry and rendered it inactive. The power station has protected

your connected equipment, but it won’t protect against future surges and

spikes.

IMPORTANT SAFETY INSTRUCTIONS

• RISK OF ELECTRIC SHOCK – Use only in dry locations and only indoors.

• DO NOT plug into another relocatable power tap.

• DO NOT “daisy chain” surge protectors.

• DO NOT use with any aquarium equipment.

• DO NOT use if correctly grounded outlets are not available.

• DO NOT install this device if there is not at least 30 feet (10 meters) or more of wire between the electrical

outlet and electrical service panel.

• This device features internal protection that will disconnect the surge protective component at the end of

its useful life, but will maintain power to the load – WHICH WILL BE UNPROTECTED. If you don’t want your

equipment at risk, follow the manufacturer’s instructions for replacing the device.

• DO NOT use in any circumstance that would aect the operation or reliability of life support equipment,

any medical applications, or patient care.

5 Plug the power cord into a grounded outlet using an outlet that accepts the

grounding prong. The power cord is equipped with a 3-prong (grounding)

plug which requires with a standard 3-prong (grounding) wall outlet to

minimize the possibility of electric shock hazard from your power station. Do

not modify the power plug.

SPECIFICATIONS

• Power station dimensions (H×W×D):

1.9 × 5.0 × 3.4 in. (4.9 × 12.8 × 8.7 cm)

• Mountable screw C-clamp (H×W×D):

2.7 × 2.0 × 1.9 in. (6.8 × 5.1 × 4.9 cm) not including screw handle

• Cable length: 6 ft. (1.8 m)

• Outlets: 3 standard outlets

• Surge protection: 900 joules

• Electrical rating: 125 V/15 A/1875 W

• USBA charger rating: 5 V/2.4 A total

• USBC charger rating: 18 W PD

• Clamping voltage: 600 V (L-N, L-G, N-G)

• Maximum peak current: 45,000 A

• AC lines protected: 15,000 A (L-N, L-G, N-G)

• Response time: Less than 1 nanosecond

V2 ENGLISH 20-0422

LEGAL NOTICES

FCC Statement

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1)

this device may not cause harmful interference, and (2) this device must accept any interference received,

including interference that may cause undesired operation.

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to

Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful

interference in a residential installation.

This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in

accordance with the instructions, may cause harmful interference to radio communications. However, there

is no guarantee that interference will not occur in a particular installation. If this equipment does cause

harmful interference to radio or television reception, which can be determined by turning the equipment o

and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit dierent from that to which the receiver is connected.

• Consult the dealer or an experienced radio/TV technician for help.

WARNING: Changes or modications not expressly approved by the party responsible for compliance could

void the user’s authority to operate the equipment.

WARNING: This product can expose you to chemicals including styrene, which is known to the State of

California to cause cancer. For more information, go to www.p65warnings.ca.gov.

ONEYEAR LIMITED WARRANTY

Visit www.insigniaproducts.com for details.

CONTACT INSIGNIA:

1-877-467-4289 (U.S. and Canada) or 01-800-926-3000 (Mexico)

www.insigniaproducts.com

INSIGNIA is a trademark of Best Buy and its aliated companies

Distributed by Best Buy Purchasing, LLC

7601 Penn Ave South, Richeld, MN 55423 U.S.A.

Produkt Specifikationer

Mærke:	Insignia
Kategori:	Vægudtag
Model:	NS-PWRD3C6

Har du brug for hjælp?

Hvis du har brug for hjælp til Insignia NS-PWRD3C6 stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Vægudtag Insignia Manualer

Insignia NS-HW1A1C22 Manual

30 September 2025

Insignia NS-PWRD3C6 Manual

30 September 2025

Insignia NS-HW36A2P Manual

30 September 2025

Insignia NS-MP570W6IN1W24 Manual

29 September 2025

Vægudtag Manualer

Nyeste Vægudtag Manualer

CyberPower P203UCW Manual

2 Oktober 2025

V-TAC VT-5134 Manual

2 Oktober 2025

CyberPower B604BK Manual

2 Oktober 2025

CyberPower P1004UC15 Manual

2 Oktober 2025

CyberPower P806UC15 Manual

1 Oktober 2025

CyberPower P1208UC15BK Manual

1 Oktober 2025

CyberPower P403UC15 Manual

1 Oktober 2025

Homematic IP HmIP-PSM-2 Manual

30 September 2025

Homematic IP HMIP-DS55 Manual

29 September 2025

Draper 30624 Manual

24 September 2025