Insignia NS-RMTSAM21 Manual

Insignia Fjernbetjening NS-RMTSAM21

Læs gratis den danske manual til Insignia NS-RMTSAM21 (2 sider) i kategorien Fjernbetjening. Denne vejledning er vurderet som hjælpsom af 4 personer og har en gennemsnitlig bedømmelse på 4.6 stjerner ud af 2.5 anmeldelser. Har du et spørgsmål om Insignia NS-RMTSAM21, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/2

3 Point your new remote towards the

TV, then press and hold the

power button.

4 As soon as your TV turns o,

immediately release the power

button. The LED blinks twice.

Note: You have three seconds to release

the power button before your remote

sends a dierent code to your TV.

5 Use the power button to turn on

your TV, then test the other buttons.

6 If one or more buttons don’t work

as you expect, repeat steps 1

through 5 using the MENU or INFO

button instead of the power

button.

Before using your new product, please read

these instructions to prevent any damage.

QUICK SETUP GUIDE

Replacement

Remote

For Samsung TVs

NS-RMTSAM21

SETTING UP YOUR SOUND BAR OR AUDIO RECEIVER VOLUME CONTROL

If you have your TV connected to a soundbar or audio receiver, you can set up your new remote to control the volume

of this device.

2 Enter the rst four-digit code for

your sound bar or audio device.

The LED should blink twice on the

last digit.

3 Test volume + and - button and

the (mute) button.

Note: If the volume buttons don’t

work, start again at step 1 using the

next code on the list.

Turning on all devices

If you have set up your soundbar or

audio device using Simple Setup or

Audio Code Setup, you can now turn

your TV and the audio device both on

and o using a single button. Hold

down the power button for three

seconds. Your new remote turns on

both the TV and the audio device or

soundbar. If you press and release the

button, it only turns on the TV.

Simple Setup

If you have a sound bar or audio device

from one of the brands listed above,

complete the following steps:

1 Turn your TV and sound bar or

audio device on, and make sure that

there is something playing that you

can hear.

2 On your new remote hold down the

volume + and - buttons together

until the LED blinks twice.

3 Point your new remote towards

your sound bar or audio devices

and hold down the digit button for

your brand (see table to the left).

4 As soon as your sound bar or audio

device mutes the volume, release

the digit button. The LED blinks

twice. The remote has found the

code for your soundbar or audio

device.

The volume buttons should now

control the volume of your your

sound bar or audio devices.

Audio code setup

If your sound bar or audio device is

not one of the brands listed, you can

also set up the remote to control it by

entering a four-digit code. Locate the

brand of your sound bar or audio

device in the Remote Codes List found

in the separate document.

1 Hold down the volume + and -

buttons together until the LED

blinks twice.

PACKAGE CONTENTS

• Replacement Remote

• Quick Setup Guide

INSTALLING BATTERIES

Insert two AAA batteries (not included)

into the remote. Make sure that the +

and – symbols match the + and –

symbols in the battery compartment.

SETTING UP YOUR REMOTE

The Insignia remote is

pre-programmed to control most

Samsung TVs.

If the buttons do not work, complete

the following steps:

1 Make sure that your TV is on and not

in standby mode.

2 On your new remote, hold down red

A and blue D until the power

button LED blinks twice.

DIGIT BRAND

0 Yamaha

1 Bose

2 Denon

3 Samsung / JBL /

Harman / Kardon

4 LG / JVC

5 Marantz / Philips

6 Onkyo

7 Panasonic / Technics

8 Pioneer

9 Sony

Power

button

AAA

LED

V1 ENGLISH 20-0415

RESETTING VOLUME

CONTROL

You can reset the volume control back

to the soundbar or audio receiver.

1 Hold down the green B and

yellow C buttons until the LED

blinks twice.

2 Press 977.

3 The LED blinks four times and the

remote is now reset.

LEARNING FUNCTIONS

Your new remote can learn any

function from your original remote.

1 Place both remotes on a at

surface with the infrared eyes

facing each other and 1–2 inches

(2.5–5 cm) apart.

Note: If you have diculty with the

learning function, install new

batteries.

2 On your new remote, hold down

the green B and yellow C buttons

until the LED blinks twice.

3 Press 975 on your new remote.

4 On your new remote, press the

button you want to learn a new

function (for example, the volume +

button).

5 On the original remote, press the

button with the function you want

to teach to the button you pressed

in Step 4.

If the LED button blinks twice on your

new remote, your new remote learned

the function.

Notes:

• If the LED shows one long blink, the

function was not learned correctly. Try

again from step 4.

• Some remotes send commands

dierently. If you nd a function can’t be

learned, try holding down the button on

the original remote instead of pressing

and releasing.

6 Repeat steps 4 and 5 to add another

function to your new remote.

Note: You can learn from multiple

remotes, but only one function per

button.

7 After you teach your new remote all

the functions you want it to learn,

press and hold ENTER until the LED

blinks twice.

Note: If you nd one or more buttons

don’t work as you expect, start again at

step 1.

DELETING A LEARNED

FUNCTION

1 On your new remote hold down the

green B and yellow C buttons until

the LED blinks twice.

2 Press 976.

3 Press the button on your new

remote you want to reset twice, the

LED should blink twice. The learned

function has been deleted.

ADDING AN APP TO A

SHORTCUT BUTTON

Your new remote has three App

Shortcut buttons which can be used to

immediately open Netix, HBO Now,

Rakuten TV, or Hulu on your Smart TV.

If you don’t have shortcut app buttons,

you can program them to open apps

immediately.

To program the shortcut app buttons,

you need to know the sequence of

buttons you press to bring up the app

(for example, Home > Menu > Down

(twice) > OK).

1 Make sure that your TV is on (not in

standby mode) and that the new

remote is operating the TV.

2 Hold down an App Shortcut button

until the LED blinks twice.

3 Press the sequence of buttons

exactly as you would normally to

open the Streaming Service App.

Note: It might take a few seconds for

the TV to react. Wait for your device to

respond rst. The remote remembers

the timing.

4 After you nish the sequence and

the Streaming Service App starts on

your TV, hold down the App

Shortcut button until the LED blinks

twice and goes o. The shortcut

button is now programmed.

Note: If you nd the sequence doesn’t

work as expected, you can repeat the

same sequence to reprogram.

LEGAL NOTICES

FCC Statement:

This equipment has been tested and found to comply

with the limits for a Class B digital device, pursuant to

part 15 of the FCC Rules. These limits are designed to

provide reasonable protection against harmful

interference in a residential installation. This equipment

generates, uses, and can radiate radio frequency energy

and, if not installed and used in accordance with the

instructions, may cause harmful interference to radio

communications. However, there is no guarantee that

interference will not occur in a particular installation. If

this equipment does cause harmful interference to radio

or television reception, which can be determined by

turning the equipment o and on, the user is encouraged

to try to correct the interference by one or more of the

following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and

receiver.

• Connect the equipment into an outlet on a circuit

dierent from that to which the receiver is connected.

• Consult the dealer or an experienced radio/TV

technician for help.

This device complies with part 15 of the FCC Rules.

Operation is subject to the following two conditions: (1)

This device may not cause harmful interference, and (2)

this device must accept any interference received,

including interference that may cause undesired

operation.

Caution: Changes or modications not expressly

approved by the party responsible for compliance could

void the user’s authority to operate the equipment.

ONE-YEAR LIMITED

WARRANTY

Visit www.insigniaproducts.com for

details.

CONTACT INSIGNIA:

For customer service, call

1-877-467-4289 (U.S. and Canada) or

01-800-926-3000 (Mexico)

www.insigniaproducts.com

INSIGNIA is a trademark of Best Buy and its aliated

companies.

Distributed by Best Buy Purchasing, LLC

7601 Penn Ave South, Richeld, MN 55423 U.S.A.

App Shortcut

buttons

Original

remote

New

remote

Produkt Specifikationer

Mærke:	Insignia
Kategori:	Fjernbetjening
Model:	NS-RMTSAM21

Har du brug for hjælp?

Hvis du har brug for hjælp til Insignia NS-RMTSAM21 stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Fjernbetjening Insignia Manualer

Insignia NS-RMTLG21 Manual

2 Oktober 2025

Insignia NS-RMTSAM21 Manual

1 Oktober 2025

Insignia NS-RMTSNY21 Manual

29 September 2025

Insignia NS-RMT8D21 Manual

29 September 2025

Insignia NS-RMTVIZ21 Manual

29 September 2025

Insignia NS-RCFNA-21 Manual

2 September 2024

Insignia NS-RMT3D21 Manual

2 September 2024

Fjernbetjening Manualer

Nyeste Fjernbetjening Manualer

GYS RC-HD4 Manual

2 Oktober 2025

Hama Universal Remote 00221064 Manual

1 Oktober 2025

WiiM Remote Manual

1 Oktober 2025

WiiM Remote 2 Manual

1 Oktober 2025

Absima CR7P Manual

29 September 2025

ProMaster PRO5439 Manual

29 September 2025

ProMaster PRO7599 Manual

29 September 2025

ProMaster PRO1782 Manual

29 September 2025

ProMaster PRO7337 Manual

29 September 2025

ProMaster PRO7606 Manual

29 September 2025