Insignia NS-RMTVIZ21 Manual

Insignia Fjernbetjening NS-RMTVIZ21

Læs gratis den danske manual til Insignia NS-RMTVIZ21 (2 sider) i kategorien Fjernbetjening. Denne vejledning er vurderet som hjælpsom af 2 personer og har en gennemsnitlig bedømmelse på 4.6 stjerner ud af 1.5 anmeldelser. Har du et spørgsmål om Insignia NS-RMTVIZ21, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/2

PACKAGE CONTENTS

• Replacement Remote

• Quick Setup Guide

INSTALLING BATTERIES

Insert two AAA batteries (not included)

into the remote. Make sure that the +

and – symbols match the + and –

symbols in the battery compartment.

Note: To set up your remote, follow the setup

steps, in order, and stop as soon as your

remote works correctly.

SETTING UP YOUR REMOTE

Your remote is compatible with any

Vizio TV and should work with newer

Vizio TVs without requiring any setup.

Vizio Smart TV functionality usually

works via the menu buttons. After you

install the batteries, test your remote. If

the buttons work correctly, your remote

is ready to use.

If the buttons do not work, complete

the following steps:

1 Make sure that your TV is on and not

in standby mode.

2 On your remote, press and hold the

yellow and green buttons until the

power button blinks twice.

3 Point your remote towards the TV,

then press and hold power ( ).

4 As soon as your TV turns o,

immediately release the button. The

power button blinks twice. You have

three seconds to release the button

before your remote sends a dierent

signal (code) to your TV.

5 Use your remote to turn on your TV,

then test the other buttons. If all of

the buttons work, your remote is

ready to use.

If some of the buttons still do not

work, complete the following steps:

1 Make sure that your TV is on and not

in standby mode.

2 On your remote, press and hold the

yellow and green buttons until the

power button blinks twice.

3 Point your remote towards your TV,

then press and hold one of the

buttons (such as MENU) that is not

working correctly.

4 As soon as the correct function (in

this example, MENU) appears on

your TV screen, immediately release

the button. The power button

blinks twice. You have three

seconds to release the button

before your remote sends a

dierent signal (code) to your TV.

5 Test the rest of the buttons. If all of

the buttons work, your remote is

ready to use.

6 If some of the buttons still do not

work, repeat the above steps for

another non-working button, then

test the rest of the buttons. Repeat

until all the buttons work.

LEARNING FUNCTIONS

Your remote can learn any function

from your original remote as long as

the original remote works.

1 Place both remotes on a at

surface with the infrared eyes

facing each other.

Note: If you have diculty with the

learning function, install new batteries

in both remotes and try the process

again. Make sure that the remote

control “eyes” are pointing at each

other and are 1–2 inches (2.5–5 cm)

apart.

2 On your new remote, press and

hold the blue and red buttons until

the power button blinks twice.

FLAT SIZE: 15 × 5.5 in. (381 × 140 mm)

FINAL FOLDED SIZE: 2.5 × 5.5 in. (63.5 × 140 mm)

QUICK SETUP GUIDE

Replacement

Remote

For Vizio TVs

NS-RMTVIZ21

Before using your new product, please read

these instructions to prevent any damage.

AAA

New remote

Original remote

NS-RMTVIZ21_20-0416_QSG_V1_EN.ai 1 10/20/2020 4:08:16 PMNS-RMTVIZ21_20-0416_QSG_V1_EN.ai 1 10/20/2020 4:08:16 PM

V1 ENGLISH 20-0416

3 On your new remote, press 975.

The power button blinks twice.

4 On your new remote, press the

button you want to learn a new

function (for example, VOL+).

5 On the original remote control,

press the button with the function

you want to teach to the button

you pressed in Step 4.

Notes:

• If the power button blinks twice,

your new remote learned the

function. You can repeat steps 4

and 5 to add another function to

your new remote.

• If the power button blinks one

long blink, your new remote did

not learn the function. Repeat

steps 4 and 5.

6 After you teach your new remote

all the functions you want it to learn,

press and hold OK for three seconds

until the power button blinks twice.

DELETING A LEARNED

FUNCTION

1 Press and hold the blue and red

buttons until the power button blinks

twice.

2 Press 976.

3 Press the button you want to reset

twice (for example, VOL+). The

power button blinks twice and the

button is reset to its original

function.

TROUBLESHOOTING

Power button does not blink when a

button is pressed.

Replace the batteries.

LEGAL NOTICES

FCC Statement:

This equipment has been tested and found to comply

with the limits for a Class B digital device, pursuant to

part 15 of the FCC Rules. These limits are designed to

provide reasonable protection against harmful

interference in a residential installation. This equipment

generates, uses, and can radiate radio frequency energy

and, if not installed and used in accordance with the

instructions, may cause harmful interference to radio

communications. However, there is no guarantee that

interference will not occur in a particular installation. If

this equipment does cause harmful interference to

radio or television reception, which can be determined

by turning the equipment o and on, the user is

encouraged to try to correct the interference by one or

more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment

and receiver.

• Connect the equipment into an outlet on a circuit

dierent from that to which the receiver is

connected.

• Consult the dealer or an experienced radio/TV

technician for help.

This device complies with part 15 of the FCC Rules.

Operation is subject to the following two conditions:

(1) This device may not cause harmful interference,

and (2) this device must accept any interference

received, including interference that may cause

undesired operation.

Caution: Changes or modications not expressly

approved by the party responsible for compliance

could void the user’s authority to operate the

equipment.

ONE-YEAR LIMITED

WARRANTY

Visit www.insigniaproducts.com for

details.

CONTACT INSIGNIA:

1-877-467-4289 (U.S. and Canada)

01-800-926-3000 (Mexico)

www.insigniaproducts.com

and other terms and phrases are trademarks or

registered trademarks of VIZIO, Inc. All other

trademarks are property of their respective owners.

INSIGNIA is a trademark of Best Buy and its aliated

companies. Distributed by Best Buy Purchasing, LLC.

7601 Penn Ave South, Richeld, MN 55423 U.S.A.

NS-RMTVIZ21_20-0416_QSG_V1_EN.ai 2 10/20/2020 4:08:16 PMNS-RMTVIZ21_20-0416_QSG_V1_EN.ai 2 10/20/2020 4:08:16 PM

Produkt Specifikationer

Mærke:	Insignia
Kategori:	Fjernbetjening
Model:	NS-RMTVIZ21

Har du brug for hjælp?

Hvis du har brug for hjælp til Insignia NS-RMTVIZ21 stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Fjernbetjening Insignia Manualer

Insignia NS-RMT8D21 Manual

29 September 2025

Insignia NS-RMTVIZ21 Manual

29 September 2025

Insignia NS-RCFNA-21 Manual

2 September 2024

Insignia NS-RMT3D21 Manual

2 September 2024

Fjernbetjening Manualer

Nyeste Fjernbetjening Manualer

ProMaster PRO5439 Manual

29 September 2025

ProMaster PRO7599 Manual

29 September 2025

ProMaster PRO1782 Manual

29 September 2025

ProMaster PRO7337 Manual

29 September 2025

ProMaster PRO7606 Manual

29 September 2025

Neets 310-0350 Manual

29 September 2025

Nikon MC-DC3 Manual

28 September 2025

Neets 310-0202 Manual

27 September 2025

DiO 54791 Manual

26 September 2025

Somfy Keygo RTS Manual

26 September 2025