Insignia NS-RMTSNY21 Manual

Insignia Fjernbetjening NS-RMTSNY21

Læs gratis den danske manual til Insignia NS-RMTSNY21 (2 sider) i kategorien Fjernbetjening. Denne vejledning er vurderet som hjælpsom af 3 personer og har en gennemsnitlig bedømmelse på 4.8 stjerner ud af 2 anmeldelser. Har du et spørgsmål om Insignia NS-RMTSNY21, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/2

3 Point your new remote towards the

TV, then press and hold the

power button.

4 As soon as your TV turns o,

immediately release the power

button. The LED blinks twice.

Note: You have three seconds to

release

the power button before

your remote sends a dierent code to

your TV.

5 Use the power button to turn on

your TV, then test the other

buttons.

6 If one or more buttons don’t work

as you expect, repeat steps 1

through 5 using the MENU or INFO

button instead of the power

button.

Before using your new product, please read

these instructions to prevent any damage.

QUICK SETUP GUIDE

Replacement

Remote

For Sony TVs

NS-RMTSNY21

SETTING UP YOUR SOUND BAR OR AUDIO RECEIVER VOLUME CONTROL

If you have your TV connected to a soundbar or audio receiver, you can set up your new remote to control the volume

of this device.

2 Enter the rst four-digit code for

your sound bar or audio device. The

LED should blink twice on the last

digit.

3 Test volume + and - buttons and

the (mute) button.

Note: If the volume buttons don’t work,

start again at step 1 using the next code

on the list.

Turning on all devices

If you have set up your soundbar or

audio device using Simple Setup or

Audio Code Setup, you can now turn

your TV and the audio device both on

and o using a single button. Hold

down the power button for three

seconds. Your new remote turns on

both the TV and the audio device or

soundbar. If you press and release the

button, it only turns on the TV.

Simple Setup

If you have a sound bar or audio

device from one of the brands listed

above, complete the following steps:

1 Turn your TV and sound bar or

audio device on, and make sure

that there is something playing

that you can hear.

2 On your new remote hold down

volume + and - buttons together

until the LED blinks twice.

3 Point your new remote towards

your sound bar or audio devices

and hold down the digit button for

your brand (see table to the left).

4 As soon as your sound bar or audio

device mutes the volume, release

the digit button. The LED blinks

twice. The remote has found the

code for your soundbar or audio

device.

The volume buttons should now

control the volume of your sound bar

or audio devices.

Audio code setup

If your sound bar or audio device is

not one of the brands listed, you can

also set up the remote to control it by

entering a four-digit code. Locate the

brand of your sound bar or audio

device in the Remote Codes List

found in the separate document.

1 Hold down volume + and - buttons

together until the LED blinks twice.

PACKAGE CONTENTS

• Replacement Remote

• Quick Setup Guide

INSTALLING BATTERIES

Insert two AA batteries (not included)

into the remote. Make sure that the +

and – symbols match the + and –

symbols in the battery compartment.

SETTING UP YOUR REMOTE

The Insignia remote is

pre-programmed to control most Sony

TVs.

If the buttons do not work, complete

the following steps:

1 Make sure that your TV is on and not

in standby mode.

2 On your new remote, hold down red

and blue buttons until the power

button LED blinks twice.

DIGIT BRAND

0 Yamaha

1 Bose

2 Denon

3 Samsung / JBL /

Harman / Kardon

4 LG / JVC

5 Marantz / Philips

6 Onkyo

7 Panasonic / Technics

8 Pioneer

9 Sony

Power

button

LED

V1 ENGLISH 20-0418

RESETTING VOLUME

CONTROL

You can reset the volume control

back to the soundbar or audio

receiver.

1 Hold down the green and yellow

buttons until the LED blinks twice.

2 Press 977.

3 The LED blinks four times and the

remote is now reset.

LEARNING FUNCTIONS

Your new remote can learn any

function from your original remote.

1 Place both remotes on a at

surface with the infrared eyes

facing each other and 1–2 inches

(2.5–5 cm) apart.

Note: If you have diculty with the

learning function, install new

batteries.

2 On your new remote, hold down

the green and yellow buttons

until the LED blinks twice.

3 Press 975 on your new remote.

4 On your new remote, press the

button you want to learn a new

function (for example, volume +

button).

5 On the original remote, press the

button with the function you want

to teach to the button you pressed

in Step 4.

If the LED button blinks twice on your

new remote, your new remote learned

the function.

Notes:

• If the LED shows one long blink, the

function was not learned correctly. Try

again from step 4.

• Some remotes send commands

dierently. If you nd a function can’t be

learned, try holding down the button on

the original remote instead of pressing

and releasing.

6 Repeat steps 4 and 5 to add another

function to your new remote.

Note: You can learn from multiple

remotes, but only one function per button.

7 After you teach your new remote all

the functions you want it to learn,

press and hold ENTER until the LED

blinks twice.

Note: If you nd one or more buttons

don’t work as you expect, start again at

step 1.

DELETING A LEARNED

FUNCTION

1 On your new remote hold down

the green and yellow buttons until

the LED blinks twice.

2 Press 976.

3 Press the button on your new

remote you want to reset twice,

the LED should blink twice. The

learned function has been deleted.

ADDING AN APP TO A

SHORTCUT BUTTON

Your new remote has three App

Shortcut buttons which can be used

to immediately open Netix, HBO

Now, Rakuten TV, or Hulu on your

Smart TV.

If you don’t have shortcut app

buttons, you can program them to

open apps immediately.

To program the shortcut app buttons,

you need to know the sequence of

buttons you press to bring up the app

(for example, Home > Menu > Down

(twice) > OK).

1 Make sure that your TV is on (not

in standby mode) and that the

new remote is operating the TV.

2 Hold down an App Shortcut

button until the LED blinks twice.

3 Press the sequence of buttons

exactly as you would normally to

open the Streaming Service App.

Note: It might take a few seconds for

the TV to react. Wait for your device to

respond rst. The remote remembers

the timing.

4 After you nish the sequence and

the Streaming Service App starts

on your TV, hold down the App

Shortcut button until the LED

blinks twice and goes o. The

shortcut button is now

programmed.

Note: If you nd the sequence doesn’t

work as expected, you can repeat the

same sequence to reprogram.

LEGAL NOTICES

FCC Statement:

This equipment has been tested and found to comply with

the limits for a Class B digital device, pursuant to part 15

of the FCC Rules. These limits are designed to provide

reasonable protection against harmful interference in a

residential installation. This equipment generates, uses,

and can radiate radio frequency energy and, if not

installed and used in accordance with the instructions,

may cause harmful interference to radio communications.

However, there is no guarantee that interference will not

occur in a particular installation. If this equipment does

cause harmful interference to radio or television

reception, which can be determined by turning the

equipment o and on, the user is encouraged to try to

correct the interference by one or more of the following

measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and

receiver.

• Connect the equipment into an outlet on a circuit

dierent from that to which the receiver is connected.

• Consult the dealer or an experienced radio/TV technician

for help.

This device complies with part 15 of the FCC Rules.

Operation is subject to the following two conditions: (1)

This device may not cause harmful interference, and (2)

this device must accept any interference received,

including interference that may cause undesired

operation.

Caution: Changes or modications not expressly

approved by the party responsible for compliance could

void the user’s authority to operate the equipment.

ONE-YEAR LIMITED

WARRANTY

Visit www.insigniaproducts.com for

details.

CONTACT INSIGNIA:

For customer service, call

1-877-467-4289 (U.S. and Canada) or

01-800-926-3000 (Mexico)

www.insigniaproducts.com

INSIGNIA is a trademark of Best Buy and its aliated

companies.

Distributed by Best Buy Purchasing, LLC

7601 Penn Ave South, Richeld, MN 55423 U.S.A.

App Shortcut

buttons

Original

remote

New

remote

Produkt Specifikationer

Mærke:	Insignia
Kategori:	Fjernbetjening
Model:	NS-RMTSNY21

Har du brug for hjælp?

Hvis du har brug for hjælp til Insignia NS-RMTSNY21 stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Fjernbetjening Insignia Manualer

Insignia NS-RMTSNY21 Manual

29 September 2025

Insignia NS-RMT8D21 Manual

29 September 2025

Insignia NS-RMTVIZ21 Manual

29 September 2025

Insignia NS-RCFNA-21 Manual

2 September 2024

Insignia NS-RMT3D21 Manual

2 September 2024

Fjernbetjening Manualer

Nyeste Fjernbetjening Manualer

Hama Universal Remote 00221064 Manual

1 Oktober 2025

WiiM Remote Manual

1 Oktober 2025

WiiM Remote 2 Manual

1 Oktober 2025

Absima CR7P Manual

29 September 2025

ProMaster PRO5439 Manual

29 September 2025

ProMaster PRO7599 Manual

29 September 2025

ProMaster PRO1782 Manual

29 September 2025

ProMaster PRO7337 Manual

29 September 2025

ProMaster PRO7606 Manual

29 September 2025

Neets 310-0350 Manual

29 September 2025