Intellytech LiteCloth Mega-8 Manual

Intellytech Lettelse LiteCloth Mega-8

Læs gratis den danske manual til Intellytech LiteCloth Mega-8 (10 sider) i kategorien Lettelse. Denne vejledning er vurderet som hjælpsom af 38 personer og har en gennemsnitlig bedømmelse på 3.9 stjerner ud af 19.5 anmeldelser. Har du et spørgsmål om Intellytech LiteCloth Mega-8, eller vil du spørge andre brugere om produktet?

Side 1/10
,0_MEGA-6FC_MEGA-8FC_eng
11
E) Attention
1. Please read this manual before using this product and follow the instructions
2. Should be used with the appropriate voltage labeled on product. Make sure the power button is set to off
before pressing the power button. Please remove the power connection if the light is not in-use. Don’t pull the
power cable directly. Please grip the power plug and pull it out from the socket.
3. Make sure your hand is dry when inserting and unplugging the power plug. Don’t touch the metal part
directly.
4. Keep the environment dry and ventilated when using the product. Do not leave or use the product in a
humid or dusty environment. And keep it away from fire or extreme heat.
5. Clean this product only with a soft and dry cloth.
6. Do NOT apply extreme pressure and do not drop the product.
7. Improper installation may damage the light, and there can be high voltage inside the unit. Please Do NOT
open or repair the unit yourself. If there is any defect, please contact Intellytech directly.
8. Only use the specific Li-ion camcorder batteries according to the model of the battery holder on the rear
panel. Do not install 24V batteries.
9. Please do not look at the LEDs directly or touch them. Please turn off the light if it is unattended.
10. Please make sure the product cools down and put it back in the case after being used. Don’t store the
product in a humid environment, and avoid direct sunshine. Avoid freezing temperatures.
D) Temperature Notice:
Instruction Manual
LiteCloth 3.0
MEGA-8 / 6
Storing your Mega-LC in a cold or location?
For optimal power distribution, allow your Mega-LC 3.0 to warm up for
5 minutes using the following settings:
1: Set the bi-color LED’s to 5600k
2: Set the output to 10%
*This isn’t required but will help in evenly distributing power through
the LED’s. We recommend this if the light is being stored in a cold grip
truck or if it has recently shipped.
Need Help? Contact us now using Live Chat at www.intellytechusa.com.
We usually respond within 10 seconds during business hours and can help with
any questions.
Email: customerservice@intellytechusa.com
Connecting Mega LED Mat to Frame
1: Unfold Folding Frame, and tighten silver collar(s) to
lock in place.
(Make sure bar it is totally straight before
tightening silver collar).
2: Attach LED Mat to Frame by adding buckles and
straps.
3: Add CL-40L anywhere on center bar of the Folding
Frame.
Connecting 5" Softbox to LED Mat
1: Unfold Softbox, and lineup Velcro between the LED
Mat and Softbox.
** User Tip: Lean light and frame vertically against a wall
and then add softbox.
**Softbox Straps: These are optional and not required.
Attach these to reduce sag on your softbox.
**Optional lightweight modifiers shown below
(Using these will reduce the weight by 2-3 pounds compared to
using the included 5" deep softbox)
Pancake Lantern W/ Skirt
Pop-Up Diffuser


Produkt Specifikationer

Mærke: Intellytech
Kategori: Lettelse
Model: LiteCloth Mega-8

Har du brug for hjælp?

Hvis du har brug for hjælp til Intellytech LiteCloth Mega-8 stil et spørgsmål nedenfor, og andre brugere vil svare dig