Interphone F3MC Manual
Interphone
Headset
F3MC
Læs nedenfor 📖 manual på dansk for Interphone F3MC (22 sider) i kategorien Headset. Denne guide var nyttig for 11 personer og blev bedømt med 4.4 stjerner i gennemsnit af 6 brugere
Side 1/22
www.interphone.com
Export Dept. international.interphone@cellularline.com www.interphone.com
U S E R M A N U A L
ENGLISH - 3 ENGLISH - 4
1 – Introducon
1.1 Hello!
Thank you for choosing our product. InterphoneF3MC is a Bluetooth® helmet headset for
wireless entertainment and communicaon system between rider and passenger.
InterphoneF3MC can be installed on most helmets by aachment / detachment quick bracket.
The ergonomic shape of the unit is user-friendly also with motorbike gloves.
InterphoneF3MC is waterproof tested, up to IP67 protecon degree (using the sealant
provided).
1.2 Main features
1. Intercom: InterphoneF3MC allows Bluetooth Intercom communicaon between
rider and passenger.
2. Phone: InterphoneF3MC has a Mulpoint Bluetooth® connecon for dual mobile
phone or other Bluetooth devices (mobile phone/GPS navigaon).
3. Music: InterphoneF3MC is able to play music from a Bluetooth® device, supporng
A2DP and AVRCP proles (smartphones, MP3 player etc.).
4. Vocal guide: InterphoneF3MC is equipped with a Text To Speech vocal guidance
system, that helps the user to operate each product feature and menu.
Index:
1. Introducon 4
2. Geng started 6
3. Sengs 9
4. Intercom 11
5. Phone / GPS 14
6. Music Streaming 17
1
37
5
6
8
2
4
www.inte rpho ne.c om
GUIDA RAPIDA
GUIDA RAPIDA
IT
SI CONSI GLIA D I VERIFI CARE LA PRESENZ A
DI AG GIORNAM ENTI SOFTWARE SU L SIT O
WWW. INT ERPH ONE. COM
A
B
C
D
E
H
I
J
F
G
ENGLISH - 5 ENGLISH - 6
2 – Geng Started
Pic.2
(1) MFB buon
(2) UP buon
(3) DOWN buon
(4) Volume + buon
(5) Volume - buon
(6) Blue led
(7) Red/Green/Orange led
(8) Connector
2.1 Main Commands (Pic.2)
Power on Press MFB buon (1), led (6) ashes.
Power o Press and hold MFB buon (1) unl you hear “Interphone powering
down” message. Led (7) ashes red for few seconds.
Volume Press buons (4) to increase or (5) to decrease.
Mute Press buon (5) for about 2 seconds.
Menu
Press buons (2) or (3) to scroll the menu items. Press MFB buon
(1) to select an item. Once selected a menu item, you come back to
“INTERCOM” menu (Standby)with a short press of MFB buon.
A. Bluetooth® unit
B. Microphone for full face helmet
C. Microphone for Jet/ip up helmet
D. Le speaker
E. Right speaker
F. Velcro set for speaker/mic + spare POP
wind protecon
G. Fixing plates + screwdriver
H. USB charging cable
I. USB data cable
J. Quick guide
Please refer to quick guide for installing F3MC on your helmet, provided in the box (can
be also downloaded from Interphone website), otherwise you can also check video
TUTORIAL on website www.interphone.com.
1.3 Box contents
Pic.1
ENGLISH - 7 ENGLISH - 8
If you select a wrong language, follow the steps below:
1. Turn o the F3MC. (Press the MFB for 5s, or unl the led lights RED).
2. Turn on the F3MC (Press the MFB for 2s).
3. Short press UP buon (2).
4. Short press MFB buon (1).
5. Short press UP buon (2).
6. Press MFB when you hear your language.
2.6 Audio priories
F3MC determinates the audio source priority in the following way:
1. Mobile phone
2. Intercom
3. A2DP audio (Smartphone/Player MP3)
F3MC automacally manage priority when audio sources play simultaneously, using the
sequence above.
Example:
● Incoming mobile call interrupt ongoing A2DP music.
● Incoming Intercom call does not interrupt an ongoing mobile phone call; the rider,
who started the intercom call, will hear a “connection failed” message.
2.2 Status led (Pic.2)
Standby BLUE led (6) ashes every 3 seconds.
Intercom acve BLUE led (6) is solid .
Interphone connected with
mobile/GPS BLUE led (6) ashes twice every 3 seconds.
Pairing mode BLUE (6) and RED (7) led ash alternately.
Charging ORANGE led (7) is solid. When charging is
completed led (7) becomes solid GREEN.
Baery low Led (7) is solid RED.
2.3 First Switch on (only twin pack)
Press MFB (1) buon to turn on both units. The units are already factory-
paired, wait for your language and press MFB (1) buon to conrm.
Later two units will be in “INTERCOM” Standby status (Chapter 4).
2.4 First Switch on (only single pack)
Press MFB (1) buon to turn on unit, wait for your language and press MFB (1) buon
to conrm.
Unit will be in “INTERCOM” Standby status (Chapter 4).
The unit will enter in “PAIRING MODE”, choose one of these:
- Short press of MFB (1) buon – pairing with mobile phone or GPS navigator.
- Short press of Up (2) buon – intercom pairing with INTERPHONE device.
- Short press of DOWN (3) buon – intercom pairing with other brand device(NON
INTERPHONE) ANYCOM mode.
- Long press of MFB (1) unl the beep – to cancel “PAIRING MODE”. Unit will enter in
“INTERCOM” Standby status(Chapter 4) and Blue led (6) will ash every 3 seconds.
2.5 Language selecon (aer rst switch on):
F3MC in Standby mode (Blue led(6) ashing), press UP buon(2) and then MFB
buon(1) to enter in “SETUP” menu. Press again UP buon(2), “LANGUAGE
SELECTION” start, wait for your language and then press MFB buon (1) to conrm it.
ENGLISH - 11 ENGLISH - 12
4.1.2 Pairing with an INTERPHONE unit (not MC).
With your unit in Standby mode (led BLUE (6) ashing):
1. Press once the UP (2) buon and then press once the MFB (1) buon to acvate
the “SETUP” menu.
2. Press three mes the UP (2) buon to select “INTERCOM DEVICE SEARCH” feature,
press the MFB (1) unl the beep to start the search.
3. On the second Interphone unit (previous series not “MC”), with unit o, push and
keep pressed the MFB buon unl the alternate ashing red/blue of unit led.
4. Aer few seconds the units will be paired, intercom connecon will be
automacally started (led BLUE (6) on). To stop the intercom communicaon press
once MFB (1) buon on one of the two units.
4.1.3 Pairing with units not Interphone (other brands)
With your unit in Standby mode (led BLUE (6) ashing):
1. Press once the UP (2) buon and then press once the MFB (1) buon to acvate
the “SETUP” menu.
2. Press four mes the UP (2) buon to select “ANYCOM SEARCH” feature, press the
MFB (1) unl the beep to start the search.
3. On the second unit Interphone start the “phone search/phone pairing mode”, NOT
see user manual of NOT Interphone unit for more details.
4. Aer few seconds the units will be paired, intercom connecon will be
automacally started (led BLUE (6) on). To stop the intercom communicaon press
once MFB (1) buon on your F3MC unit.
4.2 Intercom communicaon between two units (from “INTERCOM” menu)
To start an intercom communicaon between your F3MC (unit nr1 Pic. 4) and another
one (unit nr2 Pic. 4) follow these steps:
1. Pair units 1 and 2 (chapters 4.1.1/4.1.2/4.1.3), this is necessary only once.
2. With your F3MC unit in Standby mode (led BLUE (6) ashing), press once the MFB
(1) buon, connecon will be started. The vocal guidance will prompt a message for
intercom acvaon, BLUE (6) led of F3MC units will lights up. To stop the intercom
communicaon press once MFB (1) buon on your F3MC, both units will go in
Standby mode.
1 2
Pic.4
4 – Intercom
F3MC allows intercom communicaon (INTERCOM) in full duplex between rider and
passenger.
4.1 Pairing
Before starng the communicaon between headsets, is necessary to pair together the
units. This process has to be done only one me. F3MC will automacally recognize devices
previously paired.
F3MC is compable with all range of INTERPHONE device (also previous series) and by
ANYCOM funcon is also compable with other brands of helmet Bluetooth headsets.
Each F3MC can be paired to only one more unit.
If a F3MC unit has been paired with a unit, running a further pairing, with
another unit, will delete the pairing with rst one.
4.1.1 Pairing with an INTERPHONE MC unit
With both units in Standby mode (led BLUE (6) ashing):
1. On your F3MC unit press once the UP (2) buon and then press once the MFB (1)
buon to acvate the “SETUP” menu.
2. Press three mes the UP (2) buon to select “INTERCOM DEVICE SEARCH” feature,
press the MFB (1) unl the beep to start the search.
3. On the other unit F3MC press UP (2) buon and then press once MFB (1) buon to
acvate the “SETUP” menu.
4. Press UP (2) buon two mes, the second MC unit will go in “PAIRING MODE”.
5. Aer few seconds the units will be paired, intercom connecon will be automacally
started (led BLUE (6) on). To stop the intercom communicaon press once MFB (1)
buon on one of the two units.
Produkt Specifikationer
| Mærke: | Interphone |
| Kategori: | Headset |
| Model: | F3MC |
Har du brug for hjælp?
Hvis du har brug for hjælp til Interphone F3MC stil et spørgsmål nedenfor, og andre brugere vil svare dig
Headset Interphone Manualer
4 December 2024
4 December 2024
4 December 2024
4 December 2024
22 August 2024
22 August 2024
22 August 2024
22 August 2024
22 August 2024
22 August 2024
Headset Manualer
- Headset Sylvania
- Headset Natec
- Headset Livoo
- Headset Amazon
- Headset KEF
- Headset Promate
- Headset Vivo
- Headset Klipsch
- Headset VT
- Headset Muse
- Headset Ailihen
- Headset Vivanco
- Headset Aiwa
- Headset Polycom
- Headset GMB Audio
Nyeste Headset Manualer
9 April 2025
5 April 2025
25 Marts 2025
23 Februar 2025
20 Februar 2025
20 Februar 2025
20 Februar 2025
20 Februar 2025
20 Februar 2025
8 Februar 2025