指示灯会由蓝色转变为红色，此时手柄为充电状态；当手柄充饱后
①：使用本产品时需配套使用标准带有保护功能的电源适配器，以防发
②：P4手柄快充满电时，本产品充电指示灯存在与P4主机或手柄提示
（例如：P4手柄充电指示已经指示充满，但是进入P4主机查看依然在
③：P4手柄电池低压被保护后，插入本产品充电，指示灯会不同步，
（例如：P4手柄电池低压被保护后，插入产品进行充电，充电指示
2. 支持双手柄充电功能，更好的节约空间及电源设备；
3. 具有充电及饱和指示功能，清晰直观的了解当前充电状态；
工作电压：DC 4.8-5.5V 输入电流：<1.2A
单组充电电流： <600 mA(单个手柄） 充电时间：3小时
Charge Station For P4 Controller
1.Connect the product to the
DC5V <1.2A power adapter or
port , the power indicator will
lights up, and charging status
indicator showing current
2. Insert the P4 controller into
the interface of the charging
stand, wait for about 3 seconds,
the corresponding charging indicator will change from blue to red,
now the controller under charging state; when controller fully
charged,the red indicator will from red change to blue.
1. When using this product, need a standard power adapter with
protection function to prevent accidental damage to the product
2. When P4 controller fully charged , the indicator of this products ,
will be inconsistent with the prompt of the P4 console or controller,
this is a normal phenomenon.(Example :P4controller charging
indicatior showing full, but the P4 console still showing charging)
3. After the low voltage of the P4 controller battery is protected,
insert the product to charge, the indicator light will be inaccurate,
this is normal phenomenon.
(Example :After the low voltage of the P4 controller battery is
protected, insert the product to charge,the charging indicator still
shows blue or flashes between blue and light color for a short time)
1.The charging station used for P4 controller .
2.Supprot two controllers charging at same time , saving space and
3.With charging saturation indication function, showing the current
Product appearance illustration：
Working voltage：DC4.8V - 5.5V； input current ：< 1.2A
Charging current ：< 600 mA(single controller)； Charging time: 3H
Charge Station X1 User Manual x1
Connect to DC5V <1.2A power
Patent NO. : ZL202030261798.1
