Irox Mete-On 1 Manual

Irox Vejrstation Mete-On 1

Læs gratis den danske manual til Irox Mete-On 1 (5 sider) i kategorien Vejrstation. Denne vejledning er vurderet som hjælpsom af 14 personer og har en gennemsnitlig bedømmelse på 4.9 stjerner ud af 7.5 anmeldelser. Har du et spørgsmål om Irox Mete-On 1, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/5

English

Operating Instructions

With the Mete-On 1, you hold a genuine global innovation in your hands! Accordingly, putting it

into operation and operating it requires a new kind of procedure. Please therefore take the time

and proceed as follows when putting the device into operation:

1- Please be sure to read through the brochure ‘Personal Meteo Centre PMC Important’

2- Carry out the basic settings as described in the "short guide to starting –up".

3- Run the ‘TEST’!

If you follow these steps exactly, the Mete-On 1 will offer you great enjoyment every day and hitherto

unrivalled access to weather forecasts for Europe and your region. Everything straight away and at a

glance!

What’s the purpose of these pages here?

This document describes special functions that you do not often need and that were not explicitly

described in the instructions 1 and 2 mentioned above.

Note: It may be the case that particular operations that correspond to the latest status of the

software in the Mete-On 1 have not been described here. Between the time when this

description was written and the delivery of the device, certain operational processes may have

been modified.

The latest and valid version is available to you at any time on the Internet.

The present text is the version: IRMx1.06.S02

X.1 - Function TEST

As described in the brochure ‘Personal Meteo Centre PMC Important’, the ‘TEST’ function serves to

find a place where the device has good reception. During this test, each individual unit of data

transmitted is verified and rated as good or bad.

This function is started with the ‘TEST’ key on the reverse of the device. Proceed as follows:

1- Press the TEST key on the reverse of the device. ‘RECEPTION TEST' now appears on the display.

2- Keep the device upright (as if you were placing it on a table or hanging it on the wall) and look for a

place in your room where the symbol is displayed in its entirety. Please be sure to keep the required

distance to possible sources of interference as described in the PMC brochure.

3- On the left at the bottom of the display you will see the Meteotime symbol. This has the following

significance as long as the test is running (=RECEPTION TEST in the info window):

Flashing: The test is running; reception is good (you can leave the device in this position)

Flashing: The test is running; reception poor (please continue to look for a better position)

4- The test lasts approx. 1 minute. You can restart the test with the ‘TEST’ key at any time and also

discontinue it.

If, after completion of the test, you would like to set up the device in another position, even if it’s only in

another direction, we recommend that you do the test again.

Please note, though, that you will not be able to receive any weather forecasts for the duration of the

test.

Produkt Specifikationer

Mærke:	Irox
Kategori:	Vejrstation
Model:	Mete-On 1
Produktfarve:	Sort, sølv
Dimensioner (BxDxH):	255 x 39 x 170 mm
Kan monteres på væggen:	Ja
Alarmfunktion:	Ja
DCF radiour:	Ja
Min. /maks. Temperatur-hukommelse:	Ja