Irox METE-ON38 Manual

Irox Vejrstation METE-ON38

Læs gratis den danske manual til Irox METE-ON38 (3 sider) i kategorien Vejrstation. Denne vejledning er vurderet som hjælpsom af 12 personer og har en gennemsnitlig bedømmelse på 5.0 stjerner ud af 6.5 anmeldelser. Har du et spørgsmål om Irox METE-ON38, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/3

KSPO: 1050-12(OST)

IROX DV229NL & TS21 MANUAL (ENG)

SIZE: W105 X H148 (mm)

BY Lai HZ 30/01/13

Remote Thermo-Hygrometer

Main Unit

Personal Meteo Centre

with

Wireless Thermo-Hygrometer

DAY/NIGHT

MEM

CHANNEL

SET

TEST

In/Outdoor Temperature/

Humidity.

Information Window.

Today Weather Information

including Wind Speed, Wind

Direction, and the probability

of Rain/Snow, Day &

Night Temperature, Day &

Night Weather Status.

Tomorrow, One-Day-After,

and Two-Day-After Weather

Information including Day &

Night Temperature, Day &

Night Weather Status.

Mete-On 38

three days for 470 cities

• 3 channel outdoor 433Mhz wireless Thermo-hygrometer (channel 1 sensor is included,

additional sensors are required for channels 2 and 3)

• Indoor Thermo-hygrometer

• Maximum and minimum memories of temperature and humidity readings

• Temperature and humidity trends (UP/ FLAT/ DOWN),

• Temperature unit in degree C only.

• Regional Day-time temperature and Night-time Temperature information

• 7-languages abbreviation (English/ Espanol/ Francais/ Italiano/Dutch /Swedish/ Deutsch)

• Critical Weather Alert

• Maximum of 5 cities’ weather information can be selected and displayed

• Personalized a place name / city.

• Radio-controlled Clock and Calendar (24 hours format only)

• Time-zone setting

• Dual alarm (weekday alarm/single alarm will be sounded for 2 minutes)

• Programmable pre-alarm for outdoor sensor (channel 1 only)

• Battery Low Indicator for Main Unit and Wireless Sensor

• Powered by 2 x AA batteries for main unit, and 2 x AAA batteries for the outdoor sensor

Alarm Time

DATE Weekday alarm “OFF W-ALM” Single alarm “OFF S-ALM”

Pre-alarm “OFF P-ALM”

Exit to city display mode

• Read critical weather information one by one.

• Turn ON the alarm

• Press and hold for 3 seconds to enforce a radio controlled clock DCF signal search

• Switch to next day’s weather information

• Turn OFF the alarm

• Press and hold for 3 seconds to enforce a wireless RF signal search from remote sensor

• Switch to read outdoor temperature and humidity readings of channels 1, 2 and 3

• Press and hold for 3 seconds to enter into the auto-circulation display mode

• SCAN: the signal strength will be represented from 1 (very bad) to 9 (very good).

• You are able to press [SET] to switch from the display of the City to date, weekday alarm,

single alarm and pre-alarm.

DATE ALARM

temperature and humidity readings in record

secondshold

hold

cities

[TEST] button, “SCAN” is shown in the Information Window.

[TEST] key.

time signal

hold

be shown in the Information Window.

55 56

5857

59 60

61 62

[DAY/NIGHT]

DAY/NIGHT

UP [ ]▲

WEATHER

DATE WEEKDAY ALARM

SINGLE ALARM PRE-ALARM.

WEATHER STATUS

There are total 15 weather status for Day and 15 weather status for Night.

REMOTE SENSORS STATUS

The wave icon above the current channel icon shows the connection status of the corresponding

remote sensor:

Icon Status

Searching for the signals from the remote sensor

Corresponding remote sensor signal received successfully

No signals received for over 1 hour

SEARCH FOR REMOTE SENSORS

- The main unit can be manually activated to search for the signals from remote sensors by

pressing and holding button.DOWN ( )▼

VIEWING REMOTE (CHANNEL) TEMPERATURE AND HUMIDITY

Static Display:

- Press [ ] key to select measurements from different remote sensors of channels CHANNEL

1,2, or 3

Channel Auto-Scan Display:

- Press to enable an automatic scan of all channels, press and hold , until the [CHANNEL]

icon is displayed. The measurements from each remote channel will be displayed in 5

seconds alternatively.

NOTE: are more than one the channel auto-scan feature can be actived only if there remote

sensors operating and are set to different channels.

MAXIMUM AND MINIMUM TEMPERATURES

- The maximum and minimum indoor and outdoor temperatures and humidity readings will be

automatically stored in the memory of the main unit. Press button, the respective [MEM]

indicators, or [MAX] [MIN] will then be displayed.

- To clear the memory, hold button for 3 seconds. The maximum and minimum [MEM]

temperature records will be erased.

flashing

SWITCH TO NEXT DAY’S WEATHER INFORMATION

For each press of the UP [ ] button, the user can switch and view the weather information ▲

from today to tomorrow, one-day-after and two-day-after.

Today’s weather

information:

Tomorrow’s weather

information:

One-day-after’s

weather information:

Two-day-after’s

weather information:

hold

WEATHER

Then, please apply the following input commands:

[MEM]

AND LANGUAGES

hold

languages for

and Swedish.

inone last time,

seconds,

Date & Alarm.

30 seconds, it will

63 64

6665

67 68

69 70

Produkt Specifikationer

Mærke:	Irox
Kategori:	Vejrstation
Model:	METE-ON38
Bredde:	151 mm
Dybde:	27 mm
Højde:	124 mm
Produktfarve:	Hvid
Indbygget skærm:	Ja
Vejrudsigt:	Ja
Kan monteres på væggen:	Ja
Fjernbetjent:	Ja
Vis antal farver:	Monokrom
Ur-funktion:	Ja
Alarmfunktion:	Ja
Målefunktioner:	Indoor hygrometer, Indoor thermometer, Outdoor hygrometer, Outdoor thermometer, Rain sensor, Wind direction, Anemometer (wind speed)
Trend visning af målefunktioner:	Hygrometer, Thermometer
Vejrstation, extremum data:	Hygrometer, Thermometer
Fugtigheds-måleområde (udendørs) (H-H):	1 - 99 %
Måle rækkevidde for luftfugtighed (inde) (H-H):	1 - 99 %
Temperatur måleområde (indendørs) (T-T):	-40 - 70 °C
Temperatur måleområde (udendørs) (T-T):	-40 - 70 °C
Udendørs sensorområde:	30 m
Antal batterier (modtager):	2
Min. /maks. Temperatur-hukommelse:	Ja
Antal batterier (sensor):	2
Solopgang/solnedgang:	Ja