JDC Skywatch Wind Manual

JDC Ikke kategoriseret Skywatch Wind

Læs gratis den danske manual til JDC Skywatch Wind (2 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 6 personer og har en gennemsnitlig bedømmelse på 4.5 stjerner ud af 3.5 anmeldelser. Har du et spørgsmål om JDC Skywatch Wind, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/2

USER GUIDE

GETTING STARTED

GETTING STARTEDGETTING STARTED

Thank you for purchasing this Swiss- -designed and Swiss

manufactured wind instrument. To obtain the best results,

please read the instructions and follow the usage precautions.

This instrument is designed as an aid to users who are in an

open air- environment, but IT CANNOT replace advice and

warnings from the local weather station.

Open-air climatic conditions can sometimes change quite

dramatically, and this can happen very quickly indeed. Sunny

weather can, for example, change to thunderstorm conditions

in the space of half an hour and sometimes less. You should

therefore always follow basic safety rules whenever you

undertake open air activity.

SKYWATCH WIND

SKYWATCH WINDSKYWATCH WIND

KEY FEATURES

KEY FEATURESKEY FEATURES

SWITCHING

SWITCHINGSWITCHING

ONON

To switch on the SKYWATCH® Wind press briefly on the

button. The instrument switches on and displays the software

version after which the instrument enters the last mode

displayed before the instrument was switched off -(for first

time use this defaults to actual and maximum wind speed.

SWITCHING OFF

SWITCHING OFFSWITCHING OFF

Switching - off automatically (Auto off)

T he SKYWATCH® Wind switches off automatically one minute

after -either the button was last pressed or after the last non

zero wind speed measurement.

Switching off manually

To switch the SKYWATCH® Wind off manually (valid in every

mode), hold the button depressed until the display flashes

briefly and it switches off, then release.

DISPLAY

DISPLAY DISPLAY MODES

MODES

MODESMODES

Momentary pressure on the button allows you to move

between the display modes

Modes

1. W ind + maximum wind speed

2. Wind + lifetime maximum wind speed

3. Wind + temperature

4. Wind + wind chill (perceived temperature)

Symbol key

Wind chill Maximum wind Lifetime wind

MEMEASUREMENT

ASUREMENT

ASUREMENTASUREMENT

Selection of wind units (modes 1 & 2)

S witch between units by repeated longer button presses

whilst observing the LCD display: km/h ( kilometers per hour),

mph (miles per hour) (nautical miles per hour) and knots m/s

( meters per second). When the unit of choice appears, release

the . button

Selection of temperature units (modes 3 & 4)

Switch between units by repeated longer button presses

whilst observing the LCD display: °C or °F. When the unit of

choice appears, release the . button

Wind speed

Maximum -wind speed is measured since the last power on;

Lifetime maximum wind speed is measured since the last

manual reset (holding the power button for longer than two

seconds resets it to zero). For the measurement to be as exact

as possible align the instrument along the axis of the wind.

Temperature

sensor

Wind impeller

Beaufort

scale

Wind

units

Temperature

units

On/Off

Mode select

Lanyard

TECHNICAL SPECIFICATIONS

TECHNICAL SPECIFICATIONSTECHNICAL SPECIFICATIONS

Wind

Units of measurement

m/s, km/h, m.p.h., knots,

Beaufort (bar graph)

Resolution

to the tenth decimal place

up to 99.9, then to the unit

Precision

± 3 % F.S.

Measuring range

3 h to 185 km/

Measurement cycle

One measurement / 0.5s

Temperature

Units

°C, °F

Resolution

to one tenth of a degree-

Measurement cycle

One measurement / 0.5s

Precision

± 0.3°C at 20°C / ± 0.5°C

from -3 +7 0 to 0°C

Measuring range

from - 7 30°C to + 0°C

BATTERY

BATTERYBATTERY

Your SKYWATCH® Wind is powered by a factory fitted - 3V

lithium battery . designed for at least 250,000 measurements

Please ensure that the unit is correctly recycled in accordance

with the applicable regulations.

MAINTENANCE

MAINTENANCEMAINTENANCE

The design and manufacture of this instrument have been the

subject of a great deal of care. To make best use of the

proposed functions you are advised to use the instrument in

accordance with the following observations:

• Avoid at all costs items such as hair, thread, sand or other

dust materials getting into the impeller, as they could cause

defective rotation of the impeller and therefore a loss of

precision. If a hair or a piece of thread should manage to get

into the impeller, extract it gently using tweezers; in the

case of dust or sand, you can run clean water over the

impeller.

• Avoid touching the temperature sensor.

• Avoid exposing the instrument to extreme climatic

conditions for over-long periods. While it uses components

resistant to such temperatures, we recommend that you do

not expose your instrument to strong sources of heat, for

example under the windscreen of a vehicle.

• Avoid careless use or sharp impacts.

• DO NOT EXPOSE the instrument to powerful chemicals.

Such products could damage it.

JDC ELECTRONIC SA

Avenue des Sports 42

1400 Yverdon- - Les Bains

Switzerland

info@jdc.ch www.jdc.ch

IMPELLER REPLACEMENT

IMPELLER REPLACEMENTIMPELLER REPLACEMENT

To replace the impeller gently remove the rear support using

a pair of fine pliers. Insert the new impeller so the magnet is

facing to the rear of the unit. Gently press the rear support

back into place. Avoid touching the sharp impeller shaft.

DISCLAIMER

DISCLAIMERDISCLAIMER

JDC ELECTRONIC SA will in no way be held responsible for any

consequences, direct or indirect, or for any prejudice, which

might result from the use of this instrument.

IMPORTANT DISPOSAL INFORMATION

IMPORTANT DISPOSAL INFORMATIONIMPORTANT DISPOSAL INFORMATION

The article, its packaging and the battery supplied have been

manufactured from valuable materials that can be recycled.

Recycling reduces the amount of refuse and helps to preserve

the environment.

Dispose of the packaging at a recycling point which sorts

materials by type. Make use of the local facilities provided for

collecting paper, cardboard and lightweight packaging by

type.

Devices, marked with this symbol must not be disposed

of along with household refuse! You are legally bound

to dispose of old devices separately from household

refuse.

Information about collection points where old devices

can be disposed of free of charge is available from your

local authorities.

Batteries must not be disposed of along with

household refuse!

You are legally bound to dispose of spent batteries and

rechargeable batteries at a local authority collection

point or return them to a battery retailer.

Batteries marked with these letters contain among

others the following harmful substances:

Pb=lead, Cd=cadmium, Hg=mercury.

Rear support

Front support

Impeller

Magnet

Produkt Specifikationer

Mærke:	JDC
Kategori:	Ikke kategoriseret
Model:	Skywatch Wind

Har du brug for hjælp?

Hvis du har brug for hjælp til JDC Skywatch Wind stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Ikke kategoriseret JDC Manualer

JDC Skywatch Atmos Manual

16 August 2024

JDC Skywatch Xplorer 1 Manual

16 August 2024

JDC Skywatch Eole Manual

16 August 2024

JDC Skywatch Wind Manual

15 August 2024

Ikke kategoriseret Manualer

Nyeste Ikke kategoriseret Manualer

AmpliVox Airvox SW695 Manual

15 Juni 2025

Stiga SBC 635 KD Manual

15 Juni 2025

Cleveland 36CGM300 Manual

15 Juni 2025

Gourmia GTF7970 Manual

15 Juni 2025

Planet Audio P9630B Manual

15 Juni 2025

ORNO OR-DOM-YR-934UD Manual

15 Juni 2025

Lavex 842CD12VST12 Manual

15 Juni 2025

Marshall RCP-PLUS Manual

15 Juni 2025

Hughes & Kettner BassForce XL Manual

15 Juni 2025

Hughes & Kettner Red Box Mk III Manual

15 Juni 2025