JETI TD0807W Manual


Læs gratis den danske manual til JETI TD0807W (7 sider) i kategorien Radiostyret legetøj. Denne vejledning er vurderet som hjælpsom af 26 personer og har en gennemsnitlig bedømmelse på 4.7 stjerner ud af 13.5 anmeldelser. Har du et spørgsmål om JETI TD0807W, eller vil du spørge andre brugere om produktet?

Side 1/7
Manual DITEX-Manager
© 2016 Hacker Motor GmbH 1 Side
Manual Soware DITEX-Manager
With this guide, we show you how the software DITEX manager should be applied in individual servo
programming. The software can be download from www.Ditex-Servo.com. For more information,
please visit www.Ditex-Servo.com, Hacker-Motor.com or our YouTube video channel.
To program a Ditex servo first install the software. For programming the servos the USB interface
(Hacker part number 87201006) is required.
Open the software and connect the USB interface to your computer. The LED of the interface lights
up green when the connection is successful. Thereafter, plug the servo to the interface and the soft-
ware will open automatically. The servo confirms this with a tone sequence.
If you click the "question mark" in the top left to open the main menu
of the software, there are some basic settings of the software that can
be changed .
Here you can change the language.
In the Sound menu, the sound of the software can be changed or turned off
The design of the software can be chosen to your own preferences
Here you can load the update to the currently connected servo.
When pressing this button, the Manager is restored to the original state.
General information
Any changes that need to be performed on the servo-soware have to be conrmed by
Otherwise the sengs will be not saved in the servo!
Manual DITEX-Manager
© 2016 Hacker Motor GmbH 2 Side
SETUP
Adjusng the servo center posion .
Maximum travel A
Maximum travel B
max. Limit travel A
max. Limit travel B
Changing servo direcon
The mode "NARROW" is for specic applicaons that require a higher drive
frequency. For all other applicaons u the "NORMAL" mode. se
Adjust the servo-speed
Possibility of reducing the maximum servo-torque
The servo drives for the set me is with full torque, this allows a more sensi-
tive control to the zero posion.
Here you can choose how the servo on disconnuaon of the servo pulses
should behave by the receiver. This mode is only acve when an interrup-
on of the signal cable, or if the receiver is in acve fa -safe with no servo il
output pulses.
Servo-speed to the specied fail-safe posion.
Posion where the servo drives when signal loss. ,


Produkt Specifikationer

Mærke: JETI
Kategori: Radiostyret legetøj
Model: TD0807W

Har du brug for hjælp?

Hvis du har brug for hjælp til JETI TD0807W stil et spørgsmål nedenfor, og andre brugere vil svare dig




Radiostyret legetøj JETI Manualer

JETI

JETI TD1609S Manual

21 August 2024
JETI

JETI JDEX-RR7 Manual

21 August 2024
JETI

JETI JEX-MF2G-800 Manual

21 August 2024
JETI

JETI JM-090-L Manual

20 August 2024
JETI

JETI TD0905L Manual

20 August 2024
JETI

JETI AddCAP 1640 Manual

20 August 2024

Radiostyret legetøj Manualer

Nyeste Radiostyret legetøj Manualer