JL Audio 10W6v3 Manual

JL Audio Subwoofer 10W6v3

Læs gratis den danske manual til JL Audio 10W6v3 (4 sider) i kategorien Subwoofer. Denne vejledning er vurderet som hjælpsom af 34 personer og har en gennemsnitlig bedømmelse på 4.3 stjerner ud af 17.5 anmeldelser. Har du et spørgsmål om JL Audio 10W6v3, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/4

10W6v3 Subwoofer Driver

Congratulations on your purchase of a JL Audio subwoofer component. Your JL Audio subwoofer

is a precision loudspeaker which has been engineered to produce the highest quality sub-bass

performance in your vehicle. Authorized JL Audio dealers have extensive technical information

for many different applications of your new speaker. They also have the knowledge, skills and tools

to build a high-quality enclosure that will maximize the performance of your speaker. We highly

recommend that you have your enclosure built by an authorized JL Audio dealer.

Inside you will find specifications and two recommended enclosures for your speaker; one is a

sealed enclosure, the other is a ported design. Both types of enclosures will give you excellent sound

quality and low-frequency extension. The sealed enclosure is a better choice if space is extremely

tight, but the ported enclosure will produce 3dB more output at the same power if you have the

extra space to work with.

OWNER’S MANUAL

2 JL AUDIO 10W6v3-D4

SUBWOOFER 10W6v3-D4

Free Air Resonance (Fs): 30.12 Hz

Electrical “Q” (Qes): 0.543

Mechanical “Q” (Qms): 9.228

Total Speaker “Q” 0.513(Qts):

Equivalent Compliance (Vas): 0.821 ft3

23.25 liters

One-way, Linear Excursion

(Xmax)*:

0.75 in

19 mm

Efficiency (1W/1m)**: 82.7 dB SPL

Effective Piston Area (Sd): 49.303 in2

0.0318 m2

DC Resistance (Re)***: 6.452 ohm

Nominal Impedance: Dual 4-ohm

voice coils

Power Handling (continuous): 600 W

10W6v3 SUBWOOFER

PHYSICAL SPECIFICATIONS

Nominal Diameter: 10.0 in

250 mm

Overall Diameter (A): 10.5 in

267 mm

Mounting Hole Diameter (B): 9.02 in

229 mm

Bolt Hole Circle (C): 9.86 in

250 mm

Magnet Diameter (D): 6.3 in

160 mm

Mounting Depth (E): 6.89 in

175 mm

Required Pole-Vent Clearance: 0.50 in

12.5 mm

Net Weight: 20 lbs

9.1 kg

Driver Displacement: 0.078 ft3

2.21 liters

JL AUDIO 10W6v3-D4

U.S. PATENTS: 6,535,613 #6,118,884 #6,219,431 #6,229,902 #6,501,844 • Other U.S. & Foreign Patents Pending

W6v3 Terminal Jumper System

Please note that the W6v3 is a dual voice coil driver.

BOTH voice coils must be connected to the amplifier

(in series or parallel) for the speaker to operate

properly. To accomplish this, each W6v3 features a

pair of main input connection push-terminals and

four voice coil configuration tab terminals. These are

located behind the main input connectors and are

used to interconnect the dual voice coils in one of

two ways: Diagram A shows a series connection

(8Ω nominal impedance per speaker). Diagram B

shows a parallel connection (2Ω nominal impedance

per speaker) and is the way the speaker is configured

at the factory. After verifying that the tabs are

properly configured using the supplied jumper(s),

connect the amplifier’s output wires to the W6v3s

main input push-terminals and install the speaker

into the enclosure.

All specifications are subject to change without notice.

Diagram A: Series Connection (8Ω):

Use one jumper from “VC1–” to “VC2+”

Warning! Failure to properly connect the

configuration tabs will result in no output and

may damage the speaker.

Diagram B: Parallel Connection (2Ω):

Use two jumpers... one from “VC1–” to “VC2–” and

one from “VC1+ to “VC2+”.

* Xmax specifications are derived via one-way voice coil overhang method with no correction factors applied.

** Efficiency (1W/1m) is an accurate indicator of a subwoofer’s output capability and should not be used as a comparison to not

other subwoofers to determine which one is “louder” !

*** Re (DC resistance) is measured with the voice coils in series, for parallel-wired specification divide Re by 4. All other

specifications remain the same.

Produkt Specifikationer

Mærke:	JL Audio
Kategori:	Subwoofer
Model:	10W6v3

Har du brug for hjælp?

Hvis du har brug for hjælp til JL Audio 10W6v3 stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Subwoofer JL Audio Manualer

JL Audio Stealthbox SB-GM-SLVCRW/10TW3 Manual

30 December 2025

JL Audio Stealthbox SB-F-MUCUPE2/13W3v3 Manual

30 December 2025

JL Audio Stealthbox SB-F-150-SPRCRW/13TW5v2/GA Manual

30 December 2025

JL Audio Stealthbox SB-N-370/10W3v3 Manual

8 December 2024

JL Audio Stealthbox SB-GM-CTRIP/10TW3/UF Manual

8 December 2024

JL Audio Stealthbox SB-GM-ESC/10W1v3/TN Manual

8 December 2024

JL Audio Stealthbox SB-T-TACDC12/10TW3 Manual

16 November 2024

JL Audio SGR-10TW3 Manual

13 Oktober 2024

JL Audio SGR-8W7-ROD-RP Manual

16 September 2024

JL Audio M7-12IB Manual

14 September 2024

Subwoofer Manualer

Nyeste Subwoofer Manualer

Planet Audio PL10S Manual

18 Juni 2025

MB Quart RW1-164 Manual

18 Juni 2025

MB Quart DS1-254 Manual

17 Juni 2025

Planet Audio PL8S Manual

17 Juni 2025

MB Quart DS1-204 Manual

17 Juni 2025

DS18 IXS12.4S Manual

16 Juni 2025

RCF SUB 9019-AS Manual

16 Juni 2025

Induction Dynamics SW4 Manual

15 Juni 2025

Pure Acoustics Sub AS10 Manual

15 Juni 2025

RCF SUB 9029-AS Manual

15 Juni 2025