JL Audio Stealthbox SB-B-X5/10W1v3 Manual

JL Audio Ikke kategoriseret Stealthbox SB-B-X5/10W1v3

Læs gratis den danske manual til JL Audio Stealthbox SB-B-X5/10W1v3 (3 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 21 personer og har en gennemsnitlig bedømmelse på 4.3 stjerner ud af 11 anmeldelser. Har du et spørgsmål om JL Audio Stealthbox SB-B-X5/10W1v3, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/3

INSTALLATI ON

D I F F I C U L T Y :

I N S T A L L A T I O N G U I D E

for the

SB-B-X5/10W1v3

SKU# 94280

2000 - 2006 BMW X5

Thank you for choosing a JL Audio Stealthbox ® for your automotive sound system. With proper installation, your new

vehicle-specific enclosed subwoofer system will deliver years of listening pleasure.

We strongly recommend that you have your new Stealthbox® installed by your authorized JL Audio dealer. The

installation professionals employed by your dealer have the necessary tools and experience to disassemble and

reassemble your vehicle properly. Also, keep in mind that your warranty coverage extends to 1 year if your system is

installed or approved by your authorized JL Audio dealer. If you prefer to perform your own installation, please read

this installation guide completely

before beginning the process.

If you choose to perform the installation yourself, it is absolutely vital that

the Stealthbox ® be properly mounted to the vehicle according to these

instructions. Failure to mount the enclosure properly presents two problems:

1) The sub-bass performance will suffer due to the movement of the enclosure

caused by the force exerted by the woofer(s).

2) A loose enclosure presents a serious safety hazard in the event of a collision

or sudden deceleration.

S T E P 1

Remove the flooring and the passenger side storage/woofer

cover from the vehicle.

Continued on Next Page

S T E P 2

With a 10mm socket, remove the pair of nuts that are

pictured.

Remove this plastic flooring panel.

S T E P 3

If equipped with the factory woofer system.

Disconnect the factory woofer system.

With a 10mm socket, remove the pair of nuts that secure the

factory woofer enclosure’s footing to the floor.

SB-B-X5/10W1v3_INSTR_SKU#011221

OUT

Continued on Next Page

SB-B-X5/10W1v3_INSTR_SKU#011221

S T E P 7 ( O P T I O N A L )

If equipped with the factory woofer system.

You can use the factory footing instead of the supplied foot-

ing for the next step.

With a 5mm Allen key, remove the pair of bolts that secure

the plastic footing to the factory woofer enclosure.

S T E P 6

If equipped with the factory woofer system.

Grab the top of the factory woofer enclosure and pull out.

Guide the factory fuse/relay box, up and over the factory

woofer enclosure.

S T E P 5

If equipped with the factory woofer system.

With a 6mm Allen key, remove the bolt that secures the top

of the factory woofer enclosure.

S T E P 4

With a 7mm socket, remove the five bolts that secure the

factory fuse/relay box.

Page 2 • JL Audio, Inc 2016

S T E P 9

Place the bottom of the Stealthbox ® into the mounting area.

Guide the factory fuse/relay box up and over the top of the

Stealthbox®.

Secure the plastic mounting flange to the floor area using

the two factory 10mm nuts that were removed in STEP 3.

S T E P 1 1

Place a supplied lock washer and then flat washer onto the last

supplied 8mm x 30mm bolt. Secure the L-bracket to the top of

the Stealthbox®

S T E P 1 0

If equipped with the factory woofer system.

Secure the supplied L-bracket to the vehicle using the factory

bolt that was removed in STEP 5.

If not equipped with the factory woofer system, but

does have the threaded insert . Place a supplied flat

washers onto the supplied 8mm x 30mm bolt. Secure the

L-bracket to the vehicle with this bolt assembly.

If no threaded insert is found. Place a supplied flat

washer onto the supplied 8mmx30mm bolt. Place this bolt

through the L-bracket and hole. Place a supplied flat washer

and then lock washer and 8mm nut onto the bolt and

secure.

S T E P 8

If equipped with the factory woofer system.

Using the factory hardware, secure the factory footing to the

Stealthbox.

If not equipped with the factory woofer system.

Using a 5mm Allen key, secure the supplied plastic footing

to the Stealthbox® with the pair of supplied black flat socket

screws.

Attach desired length of speaker cable to the Stealthbox ®,

and double check the woofer for proper operation.

Produkt Specifikationer

Mærke:	JL Audio
Kategori:	Ikke kategoriseret
Model:	Stealthbox SB-B-X5/10W1v3

Har du brug for hjælp?

Hvis du har brug for hjælp til JL Audio Stealthbox SB-B-X5/10W1v3 stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Ikke kategoriseret JL Audio Manualer

JL Audio Stealthbox SBX-T-TCMAX3G/12TW3 Manual

10 Marts 2025

JL Audio Stealthbox SB-J-JL4DDRV/10TW1-2 Manual

30 December 2025

JL Audio Stealthbox SB-F-ESCP/10W1v3 Manual

30 December 2025

JL Audio Stealthbox SB-F-150-SPRCRW/13TW5v2/BK Manual

8 December 2024

JL Audio Stealthbox SB-J-JL4DPAS/10TW1-2 Manual

4 Oktober 2024

JL Audio MBT-RX Manual

3 Oktober 2024

JL Audio Stealthbox SB-POL-RZG3/10TW3 Manual

29 September 2024

JL Audio MBT-CRXv2 Manual

10 September 2024

JL Audio MBT-RXv2 Manual

4 September 2024

JL Audio MBT-CRXv3 Manual

4 September 2024

Ikke kategoriseret Manualer

Nyeste Ikke kategoriseret Manualer

Hozelock 5102 Manual

2 August 2025

ART 310 Manual

2 August 2025

Gorenje KAS53ZDCINVFT Manual

2 August 2025

Gorenje KAS35ZDCINVFT Manual

2 August 2025

Navman MY450LMT Manual

2 August 2025

Navman MiVue 745 Manual

1 August 2025

Hitachi WR22SE Manual

1 August 2025

Synology M2D20 Manual

1 August 2025

Fluke FibertLert-125 Manual

1 August 2025

Buffalo GC882 Manual

1 August 2025