JL Audio Stealthbox SB-GM-CAMCONV/10W1v3 Manual

JL Audio Ikke kategoriseret Stealthbox SB-GM-CAMCONV/10W1v3

Læs gratis den danske manual til JL Audio Stealthbox SB-GM-CAMCONV/10W1v3 (6 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 39 personer og har en gennemsnitlig bedømmelse på 4.5 stjerner ud af 20 anmeldelser. Har du et spørgsmål om JL Audio Stealthbox SB-GM-CAMCONV/10W1v3, eller vil du spørge andre brugere om produktet?

Side 1/6
I N S T A L L A T I O N G U I D E
for the
SB-GM-CAMCONV/10W1v3
SKU# 94526
2011 - Up Chevrolet Camaro Convertible
Thank you for choosing a JL Audio Stealthbox® for your automotive sound system.
With proper installation, your new vehicle-specific enclosed subwoofer system
will deliver years of listening pleasure.
We strongly recommend that you have your new Stealthboinstalled by your authorized
JL Audio dealer. The installation professionals employed by your dealer have the necessary tools
and experience to disassemble and reassemble your vehicle properly. Also, keep in mind that your
warranty coverage extends to 2 years if your system is installed or approved by
your authorized JL Audio dealer. If you prefer to perform your own installation,
please read this installation guide completely before beginning the process.
If you choose to perform the installation yourself, it is absolutely vital that
the Stealthbox ® be properly mounted to the vehicle according to these
instructions. Failure to mount the enclosure properly presents two problems:
1) The sub-bass performance will suffer due to the movement of the enclosure
caused by the force exerted by the woofer(s).
2) A loose enclosure presents a serious safety hazard in the event of a collision
or sudden deceleration.
Continued on Next Page
SB-GM-CAMCONV/10W1v3 INSTR_SKU# 011327
INSTALLATION
D I F F I C U L T Y :
35
OUT
OF
ESTIMATED TIME:
3 HOUR
S T E P 3
Carefully pull up on the upper rear plastic trim panel to
release the clips, and remove the panel.
S T E P 2
Carefully pull up on the upper side plastic trim panel to
release the clips, and remove the panel as shown. Repeat for
the opposite side.
S T E P 1
Open the convertible top, and clear out back seat area.
Continued on Next Page
SB-GM-CAMCONV/10W1v3 INSTR_SKU# 011327
S T E P 7
Remove the four nuts that hold the factory subwoofer in
place, and remove the subwoofer.
S T E P 1 1
Remove the clip located low in the recess for the convertible
top. Repeat Steps 10-11 for the opposite side.
S T E P 6
Fold down the seat back to access the factory subwoofer, as
shown.
S T E P 1 0
Remove the screw and wing nut located in the recess for the
convertible top.
S T E P 5
Pictured is a close up of the release tab. Repeat Step 4 for
the opposite side.
S T E P 9
Pictured is the vehicle with the factory subwoofer and sound
barrier removed.
S T E P 4
Using a long flat blade screwdriver, push down on the seat
back release tab as shown. Reference the next step for a
detailed image of the release tab location.
S T E P 8
Remove the clips that hold the sound barrier in place, and
remove the barrier.
Page 2 • JL Audio, Inc., 2016


Produkt Specifikationer

Mærke: JL Audio
Kategori: Ikke kategoriseret
Model: Stealthbox SB-GM-CAMCONV/10W1v3

Har du brug for hjælp?

Hvis du har brug for hjælp til JL Audio Stealthbox SB-GM-CAMCONV/10W1v3 stil et spørgsmål nedenfor, og andre brugere vil svare dig