JL Audio Stealthbox SB-GM-TRLBLZR/10W3v3/TP Manual

JL Audio Ikke kategoriseret Stealthbox SB-GM-TRLBLZR/10W3v3/TP

Læs gratis den danske manual til JL Audio Stealthbox SB-GM-TRLBLZR/10W3v3/TP (4 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 10 personer og har en gennemsnitlig bedømmelse på 4.5 stjerner ud af 5.5 anmeldelser. Har du et spørgsmål om JL Audio Stealthbox SB-GM-TRLBLZR/10W3v3/TP, eller vil du spørge andre brugere om produktet?

Download PDF
Side 1/4
INSTALLATION
D I F F I C U L T Y :
I N S T A L L A T I O N G U I D E
for the
SB-GM-TRLBLZR/10W3v3
SKU# 94142, & 94144 - 94146
2002-Up Chevrolet Trailblazer / GMC Envoy & 2003-Up Buick Rainier
Thank you for choosing a JL Audio Stealthbox® for your automotive sound system. With
proper installation, your new vehicle-specific enclosed subwoofer system will deliver
years of listening pleasure.
We strongly recommend that you have your new Stealthbox® installed by your
authorized JL Audio dealer. The installation professionals employed by your dealer have
the necessary tools and experience to disassemble and reassemble your vehicle properly.
Also, keep in mind that your warranty coverage extends to 2 years if your system is
installed or approved by your authorized JL Audio dealer. If you prefer to perform your
own installation, please read this installation guide completely
before beginning the process.
If you choose to perform the installation yourself, it is absolutely vital
that the Stealthbox® be properly mounted to the vehicle according to
these instructions. Failure to mount the enclosure properly presents two
problems:
1) The sub-bass performance will suffer due to the movement of the
enclosure caused by the force exerted by the woofer(s).
2) A loose enclosure presents a serious safety hazard in the event of a
S T E P 1
Remove all contents from the cargo area.
Continued on Next Page
S T E P 2
With a 7mm socket, remove the two bolts that are located at
the rear of the passenger's side rear wheel well.
S T E P 3
With a flat bald screw driver, remove the two push/pull tabs
that are located behind the passenger's side rear tire.
SB-GM-TRLBLZR/10W3v3_INSTR_SKU#011184
25
OUT
OF
SUVs with the air compressor only.
S T E P 9
Apply tape to the switch panel to mark your cut line and new
hose nozzle's mounting hole.
Drill a new mounting hole for the hose nozzle as close to the
switch opening as possible.
Cut the bottom of the switch panel just below the new
mounting hole.
SUVs with the air compressor only.
S T E P 1 1
The cut out of the side panel only needs to be as wide as the
switch hold clips that are on the back side of the switch panel.
The cut out of the side panel only needs to be as tall, as from
the bottom of the switch and to the top of the switch panel.
Do not cut the side panel as tall as the tongue that is on
the top and the back side of the switch panel.
Mark the hose nozzle's mounting hole onto the side panel.
SUVs with the air compressor only.
S T E P 1 0
The air compressor switch panel needs to be mounted at the
lower right corner, outside the pocket onto the side panel.
Continued on Next Page
SB-GM-TRLBLZR/10W3v3_INSTR_SKU#011184
S T E P 7
Remove the storage door.
If your SUV does not have the factory air compressor, please
go directly to STEP 14.
SUVs with the air compressor only.
S T E P 6
This compressor is not to be removed out of the wheel well.
Carefully wedge the compressor into the wheel well, so it
stays. Some large zip ties can be used to temporary mount
the compressor out of the way.
Make sure that you do not kink any of the nylon air hose.
SUVs with the air compressor only.
S T E P 5
Look up into the passenger's side rear wheel well. You will
see this metal plate as in the picture.
The air compressor in mounted onto this plate. The plate is
mounted to the chassis with two bolts.
Remove these two bolts.
S T E P 4
With a 10mm box/open end wrench, remove the bolt that is
located in front off the passenger's side rear tire.
With all the mounting hardware removed, remove the plastic
wheel well liner.
If your SUV does not have the factory air compressor, please
go directly to STEP 7.
SUVs with the air compressor only.
S T E P 8
Pop out the panel that hold the air compressor switch and
hose nozzle.
Remove the hose nozzle from panel.
Pop the switch out of the panel, from the back side.
Page 2 • JL Audio, Inc 2016

Produkt Specifikationer

Mærke: JL Audio
Kategori: Ikke kategoriseret
Model: Stealthbox SB-GM-TRLBLZR/10W3v3/TP

Har du brug for hjælp?

Hvis du har brug for hjælp til JL Audio Stealthbox SB-GM-TRLBLZR/10W3v3/TP stil et spørgsmål nedenfor, og andre brugere vil svare dig


Ikke kategoriseret JL Audio Manualer

JL Audio

JL Audio Stealthbox SBX-T-TCMAX3G/12TW3 Manual

10 Marts 2025
JL Audio

JL Audio Stealthbox SB-J-JL4DDRV/10TW1-2 Manual

30 December 2025
JL Audio

JL Audio Stealthbox SB-F-ESCP/10W1v3 Manual

30 December 2025
JL Audio

JL Audio Stealthbox SB-F-150-SPRCRW/13TW5v2/BK Manual

8 December 2024
JL Audio

JL Audio Stealthbox SB-J-JL4DPAS/10TW1-2 Manual

4 Oktober 2024
JL Audio

JL Audio MBT-RX Manual

3 Oktober 2024
JL Audio

JL Audio Stealthbox SB-POL-RZG3/10TW3 Manual

29 September 2024
JL Audio

JL Audio MBT-CRXv2 Manual

10 September 2024
JL Audio

JL Audio MBT-RXv2 Manual

4 September 2024
JL Audio

JL Audio MBT-CRXv3 Manual

4 September 2024

Ikke kategoriseret Manualer

Nyeste Ikke kategoriseret Manualer

Navman

Navman MY500XT Manual

1 August 2025
Navman

Navman FOCUS150 GPS Manual

1 August 2025
Scheppach

Scheppach TW1000 Manual

1 August 2025
Navman

Navman MiVue 750 WIFI Manual

1 August 2025
Navman

Navman MiVue Drive FHD Manual

1 August 2025
Midea

Midea MEC64 Manual

1 August 2025
Navman

Navman MY50T Manual

1 August 2025
Navman

Navman M100 Manual

1 August 2025
Navman

Navman MiVue 770 SAFETY Manual

1 August 2025
Navman

Navman MiVue 790 Manual

1 August 2025