Jonsered CS 2255 Manual

Jonsered Sav CS 2255

Læs gratis den danske manual til Jonsered CS 2255 (44 sider) i kategorien Sav. Denne vejledning er vurderet som hjælpsom af 73 personer og har en gennemsnitlig bedømmelse på 4.5 stjerner ud af 37 anmeldelser. Har du et spørgsmål om Jonsered CS 2255, eller vil du spørge andre brugere om produktet?

Side 1/44
English
CS 2255
Operator
s manual
Please read the oper
ators manual carefully and make sure you understand the instructions before using the machine.
KEY
T
O SYMBOLS
2
English
Symbols on the mac
hine:
W
ARNING! Chain saws can be
dangerous! Careless or incorrect use
can result in serious or fatal injury to the
operator or others.
Please read the operator’s manual
carefully and make sure you
understand the instructions before
using the machine.
Always wear:
Approved protective helmet
Approved hearing protection
Protective goggles or a visor
This product is in accordance with
applicable EC directives.
Noise emission to the environment
according to the European
Community’s Directive. The machine’s
emission is specified in chapter
Technical data and on label.
Other symbols/decals on the machine refer to special
certification requirements for certain markets.
Symbols in the operator’
s
manual:
Switch off the engine b
y moving the
stop switch to the STOP position before
carrying out any checks or
maintenance.
Always wear approved protective
gloves.
Regular cleaning is required.
Visual check.
Protective goggles or a visor must be
worn.
Refuelling.
Filling with oil and adjusting oil flow.
The chain brake must be engaged
when the chain saw is started.
WARNING! Kickback may occur when
the nose or tip of the guide bar touches
an object, and cause a lightning fast
reverse reaction, kicking the guide bar
up and towards the operator. May
cause serious personal injury.


Produkt Specifikationer

Mærke: Jonsered
Kategori: Sav
Model: CS 2255

Har du brug for hjælp?

Hvis du har brug for hjælp til Jonsered CS 2255 stil et spørgsmål nedenfor, og andre brugere vil svare dig