Joranalogue Contour 1 Manual

Joranalogue Ikke kategoriseret Contour 1

Læs gratis den danske manual til Joranalogue Contour 1 (7 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 34 personer og har en gennemsnitlig bedømmelse på 4.8 stjerner ud af 17.5 anmeldelser. Har du et spørgsmål om Joranalogue Contour 1, eller vil du spørge andre brugere om produktet?

Download PDF
Side 1/7
CONTOUR 1
SLEW LIMITER/FUNCTION GENERATOR
1
INTRODUC TIO N
For decades, the voltage controlled slew limiter
has been a staple of modular synthesisers. With
its extreme versatility, it can be used to slew
control voltages (CVs), create envelopes, -as a low
frequency or audio oscillator and much more.
Today, Contour 1 brings a fresh approach to this
classic circuit. I t delivers much improved
performance and control by incorporating
modern design techniques.
At its most basic, a slew limiter slows down the
rate of voltage change in a signal . On Contour 1,
the rising and falling rates can be individually set
using sliders and CV modulation.
The gate and trigger inputs allow the module to
be used as a function generator: create snappy
attack- -release (AR) and attack decay (AD)
envelopes, with slope times ranging from 500 µs
to 30 seconds. The dedicated gate input makes
it easy to generate V envelopes from any +10
signal source. Using the large tactile push button,
AD envelopes can be manually triggered. A
trigger will also reset the output voltage.
When set to loop mode, Contour 1 will
continually re-trigger itself. In this mode, it fulfils
the role of - -a variable shape low frequency
oscillator (LFO) or temperature-stable voltage
controlled oscillator (VCO) in the audio range.
B oth the rising and falling slopes can be
individually bent, from concave through linear to
convex. While doing so, the deviation in slope
time, and thus oscillation frequency, to a is kept
minimum. Since the bend parameters are
separately voltage controllable, boundless
modulation possibilities . present themselves
Explore anything from shape-shifting envelopes
to Contourrich VCO timbres: -1 will make you re
think what a slew limiter can do.
CONTENTS
In the Contour find: 1 box, you’ll
Product card, stating serial number and
production batch.
16- - -to 10 pin Eurorack power cable.
Mounting hardware: two black M3 x 6 mm
hex screws, two black nylon washers and a
hex key.
T 1 he Contour module itself, in a protective
cotton bag.
If any of these items are missing, please contact
your dealer or support@joranalogue.com.
CONTOUR 1
SLEW LIMITER/FUNCTION GENERATOR
2
CONTROLS & CONNECTIONS
1 SLEW R SLIDERSATE
Use these sliders to set the rising and falling slew
rates, from fast on the bottom to slow on top. In
the full mode the , 0 to +10 V slew time range is
500 mHz 3 µs to 0 seconds (1 kHz to 8.3 )loop . In
the audio mode, it is 500 µs to 30 1 ms ( kHz to
16 Hz loop).
The LEDs on the levers, show the module’s status
in real time. When the slew core is rising or falling,
only the corresponding LED will light up. When it
is holding, both LEDs will be illuminated. The
brightness is at all times correlated with the
positive output voltage.
2 TRIGGER BUTTON AND INPUT
Pressing the trigger button or applying a rising
edge to the trigger input has two effects: firstly, it
resets the output voltage to 0 . Secondly, while V
in slew mode, it : the voltage starts a single-shot
will rise to +10 V, and then fall again until it
reaches the voltage on the analogue input. This
feature can be used to create attack-decay (AD)
envelopes.
Contour 1’s trigger, gate and hold inputs are
uniquely designed to be driven reliably even
from weak, slow, bipolar signals. They feature
Schmitt action, 2 3 with a + V low and + V high
logic threshold.
3 SLEW/LOOP SWITCH
With this switch to the left, Contour 1 will
function as a standard slew limiter or envelope
generator. Set it to the right, and the circuit will
continually re-trigger itself for sustained
oscillation.
In this mode, the output voltage will rise to +10 V,
and subsequently fall to the voltage at the
analogue input. Once this point is reached, a new
cycle will start. Adjust the rise and fall slew rates
to change both the frequency and waveshape of
the output signal.

Produkt Specifikationer

Mærke: Joranalogue
Kategori: Ikke kategoriseret
Model: Contour 1

Har du brug for hjælp?

Hvis du har brug for hjælp til Joranalogue Contour 1 stil et spørgsmål nedenfor, og andre brugere vil svare dig


Ikke kategoriseret Joranalogue Manualer

Joranalogue

Joranalogue Route 4 Manual

16 August 2024
Joranalogue

Joranalogue Orbit 3 Manual

14 August 2024
Joranalogue

Joranalogue Morph 4 Manual

14 August 2024
Joranalogue

Joranalogue Receive 2 Manual

13 August 2024
Joranalogue

Joranalogue Fold 6 Manual

13 August 2024
Joranalogue

Joranalogue Mix 3 Manual

12 August 2024
Joranalogue

Joranalogue Cycle 5 Manual

4 Juli 2024
Joranalogue

Joranalogue Compare 2 Manual

5 December 2023
Joranalogue

Joranalogue Enhance 2 Manual

22 Oktober 2023
Joranalogue

Joranalogue Dim 2 Manual

16 September 2023

Ikke kategoriseret Manualer

Nyeste Ikke kategoriseret Manualer

Cudy

Cudy IF1008 Manual

24 August 2025
Samsung

Samsung VCA-SAE902 Manual

24 August 2025
Candy

Candy HE520PET 011 Manual

24 August 2025
Netgear

Netgear GS748Tv6 Manual

24 August 2025
Samsung

Samsung RR20N282ZU3 Manual

24 August 2025
Candy

Candy HDP 4149AMBC/1-S Manual

24 August 2025
Deye

Deye SUN-12K-SG01HP3-AU-AM2 Manual

24 August 2025
Candy

Candy HE310HM 011 Manual

24 August 2025
Candy

Candy HWP 610AMBC/1-S Manual

24 August 2025
Candy

Candy H3WS 69TAMCE-S Manual

24 August 2025