Joranalogue Mix 3 Manual


Læs gratis den danske manual til Joranalogue Mix 3 (6 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 21 personer og har en gennemsnitlig bedømmelse på 4.1 stjerner ud af 11 anmeldelser. Har du et spørgsmål om Joranalogue Mix 3, eller vil du spørge andre brugere om produktet?

Side 1/6
MIX 3
3+1 CHANNEL VOLTAGE CONTROLLED AUDIO
MIXER
1
INTRODUC TIO N
By combining a mixer and four VCAs in a single
module, Mix 3 manages to provide a unique
combination of compact size and functionality in
j H - ust 6 HP. igh end signal paths ensure
extremely low noise and distortion, wide
headroom and precise gain control, despite the
small form factor.
E ach of the three main channels has an
exponential response, which is more natural for
audio than linear, as it matches the human
hearing. However, all signal paths are DC-
coupled, so control voltage (CV) signals can be
processed as well.
What truly sets Mix 3 apart from other compact
mixing modules are the three CV inputs,
providing voltage control over the signal levels.
This even allows you to go beyond unity gain and
reach up to +20 dB of amplification. Once a CV
input is used, the corresponding channel knob
becomes a CV attenuator.
When clipping, Mix 3 does so in a clean,
symmetrical way. This yields a very pure
overdriven odd sound, only containing
harmonics, and allows the module to be used as
a triple voltage controlled distortion.
Additional features include audio indicator LEDs,
a fourth auxiliary input, voltage control over the
output level and a line output jumper setting.
CONTENTS
In the Mix 3 box, you’ll find:
Product card, stating serial number and
production batch.
16- - -to 10 pin Eurorack power cable.
Mounting hardware: two black M3 x 6 mm
hex screws, two black nylon washers and a
hex key.
The Mix 3 module itself, in a protective cotton
bag.
If any of these items are missing, please contact
your dealer or support@joranalogue.com.
MIX 3
3+1 CHANNEL VOLTAGE CONTROLLED AUDIO
MIXER
2
CONTROL S & C ONNECTIONS
1 CHANNEL KNOBS
The channel knobs provide manual control over
the signal levels. The response is exponential:
60 dB at minimum and 0 dB (unity gain) at
maximum. They also function as CV attenuators
once the corresponding channel CV input is
used.
2 CHANNEL INDICATOR S LED
Each channel features an audio indicator LED
with a VU-like decay. This makes Mix 3 very
convenient in use, especially in large patches
and/or during performance. The LEDs are most
useful for quickly identifying rhythmic signals. As
these are pure audio indicators, slow CV signals
or DC offsets are ignored.
3 S CHANNEL SIGNAL INPUT
Connect your input signals to these sockets.
While designed for audio use, the signal paths
are - -non inverting DC coupled, so control voltage
(CV) signals can be processed as well.
4 CHANNEL CV INPUTS
The channel CV inputs enable exponential
voltage control over each channel’s signal level.
Once a jack is plugged in, the corresponding
channel knob becomes an attenuator for the CV
input. With the attenuator at maximum, the
response is 0 V, 60 dB at and 0 dB (unity gain)
at +5 V. This corresponds to +12 dB/V. It is even
possible to go far beyond the normal range using
the CV input: from to +20 V, 100 dB at 3.33 dB
at +6.66 V.
5 D SIGNAL INPUT
The ‘D’ auxiliary signal input allows you to mix in
a fourth signal with the three main channels. It is
DC- coupled, unity gain, inverting.


Produkt Specifikationer

Mærke: Joranalogue
Kategori: Ikke kategoriseret
Model: Mix 3

Har du brug for hjælp?

Hvis du har brug for hjælp til Joranalogue Mix 3 stil et spørgsmål nedenfor, og andre brugere vil svare dig