Joranalogue Compare 2 Manual


Læs gratis den danske manual til Joranalogue Compare 2 (6 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 46 personer og har en gennemsnitlig bedømmelse på 4.4 stjerner ud af 23.5 anmeldelser. Har du et spørgsmål om Joranalogue Compare 2, eller vil du spørge andre brugere om produktet?

Side 1/6
COMPARE 2
DUAL WINDOW COMPARATOR
1
INTRODUCTI O N
The window comparator is a very useful circuit
building block that is common in general
electronics, but rarely found in modular synths.
While a regular comparator activates when the
input signal voltage is higher than a threshold
level, a window comparator checks if the voltage
is between two levels (these form the 'window').
Compare 2 combines two such comparators and
a logic section in 8 HP. The result is an advanced
tool for extracting gates and pulses from
analogue signals in Eurorack synths.
The detection windows are defined by the shift
and size parameters, which can be varied using
the knobs and control voltage (CV) inputs.
Complementary gate outputs are available, with
big three-colour LEDs showing each
comparator status time.’s -in real
All inputs are normalised from the left section to
the right, but the two comparators can also be
used completely independently. On the bottom,
the gates from both comparators are combined
in various ways by the logic section, which also
features LEDs.
You'll find a use for this truly multi-functional
module in practically any patch, processing
either CV or audio rhythm generator: complex ,
dual pulse width modulator, frequency
multiplier/divider with PWM, digital ‘ring
modulator’ with PWM, dynamic depth VCO
synchronizer, voltage controlled swing, logic
function array with adjustable thresholds… and
many more applications waiting to be
discovered!
CONTE N TS
In the Compare 2 box, you’ll find:
Product card, stating serial number and
production batch.
16- -10- to pin Eurorack power cable.
Mounting hardware: two black M3 x 6 mm
hex screws, two black nylon washers and a
hex key.
T 2 he Compare module itself, in a protective
cotton bag.
If any of these items are missing, please contact
your dealer or support@joranalogue.com.
COMPARE 2
DUAL WINDOW COMPARATOR
2
CONTR OLS & CO NNECTI ONS
1 S HIFT KNOBS
Each of the identical window comparators
features a knob to offset the window’s centre.
The range is −5 V to +5 V in the centre V, with 0
position.
2 SIZE KNOBS
Each comparator also includes a size knob,
which controls the distance between the
window edges, from very small (a few mV) to 10 V
maximum.
3 SHIFT AND SIZE CV INPUTS
The independently windows can be modulated
using these CV inputs. The modulation voltages
are then added to the knob settings to generate
the final detection windows.
The CVs of the left comparator are normalised to
the right, so both comparators can be voltage
controlled together.
Note that both CV inputs can process negative
control voltages as well. In the case of the size
parameter, this can cause the window to
become negative, which simply means the
comparator output active. will never become
4 SIGNAL INPUTS
Connect the analogue signals you want to
extract gates and pulses from to these sockets.
Both CV and audio can be processed. These
sockets are also normalised left to right, so by
default the same signal is sent to both
comparators.


Produkt Specifikationer

Mærke: Joranalogue
Kategori: Ikke kategoriseret
Model: Compare 2

Har du brug for hjælp?

Hvis du har brug for hjælp til Joranalogue Compare 2 stil et spørgsmål nedenfor, og andre brugere vil svare dig




Ikke kategoriseret Joranalogue Manualer

Ikke kategoriseret Manualer

Nyeste Ikke kategoriseret Manualer