Joranalogue Morph 4 Manual


Læs gratis den danske manual til Joranalogue Morph 4 (6 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 10 personer og har en gennemsnitlig bedømmelse på 4.2 stjerner ud af 5.5 anmeldelser. Har du et spørgsmål om Joranalogue Morph 4, eller vil du spørge andre brugere om produktet?

Side 1/6
MORPH 4
DIMENSIONAL MODULATION ARRAY
1
INTRODUC TIO N
Modulation is the core concept of modular
synthesis: parameters changing over time,
adding movement and musical interest to what
would otherwise be merely static sounds. Being
able to control the amplitude of signals
throughout a patch is therefore essential, and
one can never have too many voltage controlled
amplifiers (VCAs).
Designed as a -fully featured modulation hub for
Eurorack synthesisers, Morph 4 takes the basic
concept of the multi module to the next -VCA
level.
Four linear amplitude modulators are controlled
by a master ‘morph’ parameter. The response of
each modulator to this parameter is completely
variable, both manually and under voltage
control, and can be overridden if desired. Each
response is triangular, with the position
parameter setting the maximum point along the
morph axis, while ‘span’ determines the width of
the triangle’s base.
In addition to separate signal inputs and outputs,
a variety of combined outputs is available as well:
A+B, C+D, add and averag (unity gain) ing mixes,
and instantaneous minimum and maximum.
Input normalisation makes it easy to send the
same signal to multiple modulators, while
output and modulator response LEDs provide
essential visual feedback.
The combination of master control, fully flexible
modulators and multiple combined outputs
creates a module truly embodying the spirit of
‘patch programmable’ modular synthesis. Use
Morph 4 as a voltage controlled mixer, dual
crossfader, dual panner, interpolating scanner,
interpolating distributor, quad VCA ,
quadraphonic controller, slope modifier, rectifier,
complex waveshaper or something in between
any of those—the choice is yours.
CONTENTS
I 4 n the Morph box, you’ll find:
Product card, stating serial number and
production batch.
16- -10-to pin Eurorack power cable.
Mounting hardware: two black M3 x 6 mm
hex screws, two black nylon washers and a
hex key.
T 4 he Morph module itself, in a protective
cotton bag.
If any of these items are missing, please contact
your dealer or support@joranalogue.com.
MORPH 4
DIMENSIONAL MODULATION ARRAY
2
CONTROL S & CONNECTIONS
1 LEVEL KNOBS
The level knobs are CV attenuators for the
modulator level inputs, determining the gain for
each modulator.
2 POSITION KNOBS
Each modulator by default responds to the
morph parameter in a triangular fashion. The
position parameter sets the location of the
triangle’s peak in relation to the morph axis. For
example, if a position knob is set to the centre
position, that modulator will reach its peak
response when the morph knob is centred as
well (assuming no level CV is applied).
3 SPAN KNOBS
The width of the base for each modulator’s
morph response triangle is set by the span
parameter. For example, a small span means the
modulator will be fully closed for most morph
values, except for a small range around the peak
position.


Produkt Specifikationer

Mærke: Joranalogue
Kategori: Ikke kategoriseret
Model: Morph 4

Har du brug for hjælp?

Hvis du har brug for hjælp til Joranalogue Morph 4 stil et spørgsmål nedenfor, og andre brugere vil svare dig




Ikke kategoriseret Joranalogue Manualer

Ikke kategoriseret Manualer

Nyeste Ikke kategoriseret Manualer