Joranalogue Switch 4 Manual


Læs gratis den danske manual til Joranalogue Switch 4 (5 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 39 personer og har en gennemsnitlig bedømmelse på 4.4 stjerner ud af 20 anmeldelser. Har du et spørgsmål om Joranalogue Switch 4, eller vil du spørge andre brugere om produktet?

Side 1/5
SWITCH 4
PERFORMANCE SWITCHER/ROUTER
1
INTRODUC TIO N
Designed with and for performing artists,
Switch -4 delivers a hands on signal switching
and routing solution for your Eurorack modular
synthesiser.
Quickly mute audio signals, trigger envelopes
live, select modulation sources on the fly... With
custom dual-action toggle switches, an intuitive
interface and sturdy construction, Switch 4 will
prove just as useful on stage as in the studio.
The bottom switching section includes four
lever-actuated toggle switches, to make or break
the signal path between the inputs and outputs.
These switches feature a dual action: latched
upwards, momentary downwards.
The four input signals are also sent to the top
routing section, where two rotary switches allow
you to select the signals to be sent to the
matching outputs. Here you'll also find dual-
action toggle switches, for added versatility.
Finally, all signal paths are buffered, avoiding
signal cuts when shorting a jack during patching
or severe loading effects when driving many
inputs. The high end components provide -
exceptionally low noise and distortion, so Switch
4 can reliably process audio, control voltages and
gates/triggers.
CONTENTS
In the Switch 4 box, you’ll find:
Product card, stating serial number and
production batch.
16- - -to 10 pin Eurorack power cable.
Mounting hardware: two black M3 x 6 mm
hex screws, two black nylon washers and a
hex key.
T 4 he Switch module itself, in a protective
cotton bag.
If any of these items are missing, please contact
your dealer or support@joranalogue.com.
SWITCH 4
PERFORMANCE SWITCHER/ROUTER
2
C & C ONTROL S ONNECTIONS
1 SIGNAL INPUTS
The four inputs are arranged in a column. The
sockets are normalised top to bottom, so a single
signal can be sent to multiple destinations. For
example, if only the A socket is used, the signal
will also be sent to the B, C and D inputs. Any kind
of signal can be used: audio, CV or gate/trigger.
Input socket A includes a +5 V normalisation.
Simply leave the socket unused to easily create
manual gates.
2 TOGGLE SWITCHES
Switch -4 contains six dual action toggle
switches: one for each output. The
corresponding signal is sent to the output socket
if the switch is in the upper (latched) or lower
(momentary) position, while the connection is
interrupted if the switch is in the centre position.
Th vesis dual switching action gi tremendous
control during live performances.
3 ROTARY SWITCHES
The top routing section contains two rotary
switches, which can each be set to select one of
the four inputs. The selected signal is then sent
to the toggle switch right next to the rotary
switch. When that switch is active, the selected
input signal will be available at the output.
4 S IGNAL OUTPUTS
The switched and routed signals are available at
the output sockets. -These are impedance
compensated, allowing pitch CVs to be switched
while retaining their accuracy,


Produkt Specifikationer

Mærke: Joranalogue
Kategori: Ikke kategoriseret
Model: Switch 4

Har du brug for hjælp?

Hvis du har brug for hjælp til Joranalogue Switch 4 stil et spørgsmål nedenfor, og andre brugere vil svare dig