Joy-It RB-CASEP4+03 Manual

Joy-It Ikke kategoriseret RB-CASEP4+03

Læs gratis den danske manual til Joy-It RB-CASEP4+03 (4 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 14 personer og har en gennemsnitlig bedømmelse på 4.7 stjerner ud af 7.5 anmeldelser. Har du et spørgsmål om Joy-It RB-CASEP4+03, eller vil du spørge andre brugere om produktet?

Side 1/4
www.joy it.net-
Pascalstr. 8 47506 Neukirchen Vluyn-
RB
RB
RB
RBRB-
-
-
--CASEP4+03
CASEP4+03
CASEP4+03
CASEP4+03CASEP4+03B
B
B
BB
Assembly instructions
1. GERNERAL INFORMATION
1. GERNERAL INFORMATION
1. GERNERAL INFORMATION
1. GERNERAL INFORMATION1. GERNERAL INFORMATION
Dear customer,
Thank you for choosing our product. In the following, we will show you
what to consider during commissioning and use.
IShould you encounter any unexpected problems, do not hesitate to
contact us.
www.joy it.net-
Pascalstr. 8 47506 Neukirchen Vluyn-
1. Installation of the Raspberry Pi:
The Raspberry Pi 4 must be inserted first in the bottom layer
of the case:
Then the middle (slightly transparent) piece of the case
needs to be attached. The magnets will keep it in place.
2. ASSEMBLY OF THE CASE
2. ASSEMBLY OF THE CASE
2. ASSEMBLY OF THE CASE
2. ASSEMBLY OF THE CASE2. ASSEMBLY OF THE CASE
Now stick the enclosed heatsinks onto the Raspberry Pi.
The large heat sink belongs on the CPU, the middle sized
heatsink on the RAM and the small heat sink belongs on the
USB3.0 controller.


Produkt Specifikationer

Mærke: Joy-It
Kategori: Ikke kategoriseret
Model: RB-CASEP4+03

Har du brug for hjælp?

Hvis du har brug for hjælp til Joy-It RB-CASEP4+03 stil et spørgsmål nedenfor, og andre brugere vil svare dig




Ikke kategoriseret Joy-It Manualer

Ikke kategoriseret Manualer

Nyeste Ikke kategoriseret Manualer