Joy-It RB-JoyPi-Addon Manual

Joy-It Ikke kategoriseret RB-JoyPi-Addon

Læs gratis den danske manual til Joy-It RB-JoyPi-Addon (15 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 12 personer og har en gennemsnitlig bedømmelse på 4.8 stjerner ud af 6.5 anmeldelser. Har du et spørgsmål om Joy-It RB-JoyPi-Addon, eller vil du spørge andre brugere om produktet?

Side 1/15
www.joy it.net-
Pascalstr. 8 47506 Neukirchen Vluyn-
JOYPI EXPANSION KIT
RB-JoyPi Addon-
1. GENERAL INFORMATION
Dear Customer,
thank you for choosing our product. In the below, we will show you what
you need to know about commissioning and use of the product.
If you encounter any unexpected problems during use, please feel free to
contact us.
These instructions only refer to the expansion pack for the JoyPi. If you
have any questions about the basic functions of the JoyPi, you can down-
load the main JoyPi manual .here
www.joy it.net-
Pascalstr. 8 47506 Neukirchen Vluyn-
2. ASSEMBLY
First, screw the spacers to the port doubler as seen in the picture below.
Your Raspberry Pi should already be screwed into the JoyPi.
Now you can plug the port doubler onto the Raspberry Pi.
The port doubler is not screwed to the Raspberry Pi, because
the port doubler has to be removed again when you want to
close the JoyPi.
Finally, you only need to connect the GPIO strip of the JoyPi, with the
GPIO strip of the port doubler with the supplied cable.


Produkt Specifikationer

Mærke: Joy-It
Kategori: Ikke kategoriseret
Model: RB-JoyPi-Addon

Har du brug for hjælp?

Hvis du har brug for hjælp til Joy-It RB-JoyPi-Addon stil et spørgsmål nedenfor, og andre brugere vil svare dig