Joy-It RB-STROMPI2 Manual

Joy-It Ikke kategoriseret RB-STROMPI2

Læs gratis den danske manual til Joy-It RB-STROMPI2 (9 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 15 personer og har en gennemsnitlig bedømmelse på 5.0 stjerner ud af 8 anmeldelser. Har du et spørgsmål om Joy-It RB-STROMPI2, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/9

STROM PI 2

Power Solution

1. GENERAL INFORMATION

Dear customer,

thank you for choosing our product. In the following, we will show what

you should note at the commissioning and during the usage.

Should you encounter any unexpected problems during use, please do not

hesitate to contact us.

The StromPi 2 expansionboard is the new development of the Joy-IT power

solution. Not only, the voltage range is increased from 6 to 61 V to connect

for example bigger / more batteries or power supplies.

Therefore, the StromPi 2 board provides now up to 3 A current to supply

greater projects with enough power. Moerover, the reset-function for the

Raspberry Pi is now integrated which extends the USV-function of the

StromPi practically.

Through the new super-at construction and connection, the StromPi 2 ts

in many cases and new application areas. The StromPi 2 allows to connect

your Raspberry Pi with an arbitary voltage source with a voltage range from

6 to 61 V so that you have new possibilities to applicate the Raspberry Pi (car,

ship, truck, industrial plant etc.). Furthermore, the Raspberry Pi

receives optionally an upgrade of the USB outputs to a high power USB

output to operate power-intensive devices for examples USB-hard disks

without any restrictions.

The integrated USV-function enables the safeguarding of critical

applications against power failures. Via soware for the Raspberry Pi, it is

possible to monitor the USV-function and to mail dierent reports via e-mail

in case of a failure. Due to the used eicient solution for switching

regulators, it allows the Raspberry Pi to operate as a portable device via a

battery.

useful expansion of the USV-mode: Aer the Raspberry is shut down at a

power failure by the StromPi, the new reset- function restarts the Raspberry

Pi automatically if the main voltage source is available again.

intended use: The expansion board to connect a compatible single board

computer (e.g. Raspberry Pi)with a voltage source from 6 to 61 V so it can

operate with this power.

warning: At a heavy load, the StromPi can heat up. Do not touch the

board during use to prevent burn injuries - enable a solid air

supply to enclude the overheating of the device.

Produkt Specifikationer

Mærke:	Joy-It
Kategori:	Ikke kategoriseret
Model:	RB-STROMPI2

Har du brug for hjælp?

Hvis du har brug for hjælp til Joy-It RB-STROMPI2 stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Ikke kategoriseret Joy-It Manualer

Joy-It SBC-NodeMCU-ESP32-C Manual

30 Januar 2025

Joy-It COM-RM01 Manual

30 Januar 2025

Joy-It RB-CaseP5-07 Manual

28 Januar 2025

Joy-It SBC-LCD128x64 Manual

14 Januar 2025

Joy-It JT-DPM8650 Manual

1 Januar 2025

Joy-It RB-AlucaseP4 + 01 Manual

27 December 2024

Joy-It RD6006 Manual

4 December 2024

Joy-It RB-Proto+ Manual

4 December 2024

Joy-It SBC-DVA Manual

6 September 2024

Joy-It ARD MEGA2560R3 Manual

5 September 2024

Ikke kategoriseret Manualer

Nyeste Ikke kategoriseret Manualer

Playtive IAN 332975 Manual

16 Juni 2025

Playtive HG05527 Manual

16 Juni 2025

Philips 75PUH6393 Manual

16 Juni 2025

Foster Slimline FSL400L Manual

16 Juni 2025

Playtive HG04098 Manual

16 Juni 2025

Aiphone JPW-BA Manual

16 Juni 2025

Life On Products LCAF020 Manual

16 Juni 2025

Hager CEA263U Manual

16 Juni 2025

Moulinex Illico DJE241 Manual

16 Juni 2025

Foster Slimline FSL800M Manual

16 Juni 2025