Joy-It RB-TFT1.8 Manual

Joy-It overvåge RB-TFT1.8

Læs gratis den danske manual til Joy-It RB-TFT1.8 (12 sider) i kategorien overvåge. Denne vejledning er vurderet som hjælpsom af 15 personer og har en gennemsnitlig bedømmelse på 4.3 stjerner ud af 8 anmeldelser. Har du et spørgsmål om Joy-It RB-TFT1.8, eller vil du spørge andre brugere om produktet?

Side 1/12
1,8 " TFT DISPLAY-
RB-TFT1.8
1. GENERAL INFORMATION
Dear customer,
thank you for choosing our product. In the following, we will show you
how to use this device.
Should you encounter any unexpected problems during use, please do
not hesitate to contact us.
2. USAGE WITH RASPBERRY PI
2.1 Connection
TFT Raspberry Pi
VCC 3,3 V
GND GND
SCL GPIO 11
(SCLK)
SDA GPIO 10
(MOSI)
RS/DC GPIO 25
RES GPIO 24
CS GPIO 8
(CE0)
On the back of the display is an SD card slot, which can be accessed with
the other pins.
2.2 Installation
We use with the Raspberry Pi the library Adafruit_CircuitPython
_RGB_Display Adafruit from , which was published under the
MIT-
License
.
First, install so that you can perform all installations without any pip
problems. To do this, run the following command in your console.
sudo apt get install python3 pip- -


Produkt Specifikationer

Mærke: Joy-It
Kategori: overvåge
Model: RB-TFT1.8

Har du brug for hjælp?

Hvis du har brug for hjælp til Joy-It RB-TFT1.8 stil et spørgsmål nedenfor, og andre brugere vil svare dig




overvåge Joy-It Manualer

Joy-It

Joy-It RB-LCD7.2 Manual

3 September 2024
Joy-It

Joy-It RB-TFT3.2-V2 Manual

3 September 2024
Joy-It

Joy-It RB-LCD5 Manual

3 September 2024
Joy-It

Joy-It SBC-LCD84x48 Manual

1 September 2024
Joy-It

Joy-It SBC-OLED01 Manual

1 September 2024
Joy-It

Joy-It RB-TFT1.8 Manual

1 September 2024
Joy-It

Joy-It SBC-LCD16x2 Manual

1 September 2024
Joy-It

Joy-It SBC-LCD20x4 Manual

1 September 2024
Joy-It

Joy-It SBC-OLED01.3 Manual

1 September 2024
Joy-It

Joy-It SBC-LCD1.28R Manual

1 September 2024

overvåge Manualer

Nyeste overvåge Manualer