Joy-It SBC-LCD20x4 Manual

Joy-It overvåge SBC-LCD20x4

Læs gratis den danske manual til Joy-It SBC-LCD20x4 (10 sider) i kategorien overvåge. Denne vejledning er vurderet som hjælpsom af 31 personer og har en gennemsnitlig bedømmelse på 4.0 stjerner ud af 16 anmeldelser. Har du et spørgsmål om Joy-It SBC-LCD20x4, eller vil du spørge andre brugere om produktet?

Side 1/10
www.joy it.net-
Pascalstr. 8 47506 Neukirchen Vluyn-
20X4 LCD MODULE
I2C serial
1. GENERAL INFORMATION
Dear customer,
Thank you for purchasing our product. In the following, we will show you
which things should be noted during the use.
Should you encounter any unexpected problems, do not hesitate to contact
us.
www.joy it.net-
Pascalstr. 8 47506 Neukirchen Vluyn-
2. USE WITH AN ARDUINO
Connecting the display
Connect the display to the pins of your Arduino like shown in the picture
or rather in the chart.
Arduino® Uno 20 x 4 LCD
GND GND
5 V VCC
SDA SDA
SCL SCL
This picture was made in .Fritzing
Note
On the back of the display, besides the connections, there is a potentio-
meter and a jumper.
The potentiometer is used to adjust the contrast of the display and by
removing the jumper, you can permanently turn o the display's
backlight.


Produkt Specifikationer

Mærke: Joy-It
Kategori: overvåge
Model: SBC-LCD20x4

Har du brug for hjælp?

Hvis du har brug for hjælp til Joy-It SBC-LCD20x4 stil et spørgsmål nedenfor, og andre brugere vil svare dig




overvåge Joy-It Manualer

Joy-It

Joy-It RB-LCD7.2 Manual

3 September 2024
Joy-It

Joy-It RB-TFT3.2-V2 Manual

3 September 2024
Joy-It

Joy-It RB-LCD5 Manual

3 September 2024
Joy-It

Joy-It SBC-LCD84x48 Manual

1 September 2024
Joy-It

Joy-It SBC-OLED01 Manual

1 September 2024
Joy-It

Joy-It RB-TFT1.8 Manual

1 September 2024
Joy-It

Joy-It SBC-LCD16x2 Manual

1 September 2024
Joy-It

Joy-It SBC-LCD20x4 Manual

1 September 2024
Joy-It

Joy-It SBC-OLED01.3 Manual

1 September 2024
Joy-It

Joy-It SBC-LCD1.28R Manual

1 September 2024

overvåge Manualer

Nyeste overvåge Manualer