JUNG 1201-1URE Manual

JUNG Skifte 1201-1URE

Læs gratis den danske manual til JUNG 1201-1URE (4 sider) i kategorien Skifte. Denne vejledning er vurderet som hjælpsom af 47 personer og har en gennemsnitlig bedømmelse på 5.0 stjerner ud af 24 anmeldelser. Har du et spørgsmål om JUNG 1201-1URE, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/4

Light Management Relay insert

with potential-free contact

Ref.-no.: 1201-1 URE

Relay insert with potential-free contact

1. Warning

Caution: The installation and assembly of electrical equipment may

only be performed by a skilled electrician.

Not suitable for disconnecting.

To prevent electric shocks, always shut off the mains supply (by

cutting out the circuit-breaker) before working on the device or

before replacing the lamp.

Non-observance of the installation instructions may cause fire or

other hazards.

2. Function

Relay insert with potential-free contact for the switching of extensive

lighting installations:

• 230 V incandescent lamps.

• 230 V halogen lamps.

The switching actions are triggered by pressing the button attachment of

the relay insert with potential-free contact, the button of extension units or

of radio-control transmitters.

The present operating instructions describe the functions that can be

obtained when used with the manual multi-function pushbutton.

A detailed description of the functions in conjunction with other

attachments or with the remote control can be found in the corresponding

operating instructions.

3. Operation

Press on the TOP, BOTTOM and center surface:

Switching on, switching off (toggling).

Stand: Nov-08 825 548 03

Light Management Relay insert

with potential-free contact

Ref.-no.: 1201-1 URE

4. Installation Instructions

Install the relay insert with potential-free contact in a flushmounting box

as per DIN 49073 (Fig. A).

The connecting terminals of the insert (1) must be at the bottom.

The relay insert with potential-free contact can only be used in

combination with an attachment. Plug the attachment (2) together with

frame (3) on the insert (1).

The electrical contact is established by means of connector (4).

The attachment must be plugged into the insert before switching on the

mains voltage.

Mains failures of more than 1 second will cause the relay insert with

potential-free contact to switch off.

Produkt Specifikationer

Mærke:	JUNG
Kategori:	Skifte
Model:	1201-1URE

Har du brug for hjælp?

Hvis du har brug for hjælp til JUNG 1201-1URE stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Skifte JUNG Manualer

JUNG W8180 Manual

10 December 2024

JUNG 201TE Manual

10 December 2024

JUNG ASLS1280-1 Manual

20 September 2024

JUNG ME5201DTU Manual

2 September 2024

JUNG SL1180 Manual

28 August 2024

JUNG AS5544.03VWW Manual

28 August 2024

JUNG ES5201DTU Manual

28 August 2024

JUNG SL1180-1 Manual

28 August 2024

JUNG CD5024WW Manual

28 August 2024

JUNG A1180-1 Manual

23 August 2024

Skifte Manualer

Nyeste Skifte Manualer

Lancom GS-2412 Manual

4 April 2025

Lancom GS-2412P Manual

4 April 2025

Lancom GS-2426 Manual

4 April 2025

Hager ARF970D Manual

3 April 2025

Hager ARF920D Manual

3 April 2025

Roline 14.01.3579 Manual

2 April 2025

Fantini Cosmi B12BN Manual

1 April 2025

Fantini Cosmi B12DN Manual

1 April 2025

Fantini Cosmi B12GN Manual

1 April 2025

Fantini Cosmi B12HN Manual

1 April 2025