JUNG 134.1 Manual

JUNG Ikke kategoriseret 134.1

Læs gratis den danske manual til JUNG 134.1 (5 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 3 personer og har en gennemsnitlig bedømmelse på 4.0 stjerner ud af 2 anmeldelser. Har du et spørgsmål om JUNG 134.1, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/5

Key switches

20.11.20241 / 50024096301

Key switches

without protection against dismounting

Ref.-no.: 104.15, 106.15, 133.15, 134.15

with protection against dismounting

Ref.-no.: 104.28, 106.28, 133.18,

134.18, 138.18, 134.28

with protection against dismounting, IP44

Ref.-no.: CD 104.18 WU, CD 106.18 WU,

CD 133.18 WU, CD 134.18 WU

Operating instructions

1 Safety instructions

Electrical devices may only be installed and connected by electrically skilled persons.

Serious injuries, re or property damage possible. Please read and follow the instructions in full.

These instructions are an integral part of the product, and must remain with the end customer.

2 Device components

Abb. 1: Geräteaufbau

(1) Sealing gasket (see accessories)

(2) Insert

(3) Frame

(4) Prole half cylinder

(5) Centre plate

3 Function

Intended use

- for prole half cylinder with approx. 40 mm overall length (DIN 18252), e.g. art. no.: 28, 28 G1

- not suitable for installation in surface caps

1 32 4 5 5

Key switches

20.11.20242 / 50024096301

Designs

Blind reversing switch, 1-pole (1 motor)

104.15, CD 104.18 WU

Blind reversing push-button, 1-pole (1 motor)

134.15, 134.18, CD 134.18 WU

Blind reversing switch, 2-pole (2 motors)

104.28

Blind reversing push-button, 2-pole (2 motors)

134.28

Push-button (2-way), 1-pole

133.15, 133.18, CD 133.18 WU

Control push-button, 1 NC contact – 1 NO contact

138.18

Universal-o󰀨 2-way switch, 1-pole

106.15, CD 106.18 WU

Universal-o󰀨 2-way switch, 2-pole

106.28

4 Information for electrically skilled persons

Mounting and electrical connection

DANGER

Electrical shock on contact with live parts in the installation environment.

Electrical shocks can be fatal.

Before working on the device, disconnect the power and cover live parts in the area!

Connecting ush-mounted inserts

• Only for inserts with IP44:

Feed the cable through the sealing gasket.

• Connect the insert according to the connection diagram. (g. 5 to g. 10)

Adjusting the cam on the prole half cylinder

180°

0°

300°

240°

210°

330°

30°

60°

90°

120°

150°

270°

Fig. 2 and 3: Adjusting the cam on the prole half cylinder

Example:

- Adjustable cam (6) on a prole half cylinder with 12 positions (0° to 330°)

- Fork (7) of a blind switch in the Stop switching state, for switching states see chapter operation

• Set the cam so that it is either located inside the fork or engages with the fork from the outside after the locking

cylinder has been mounted.

For this, use a screwdriver to press down on the two locking pins (8) and turn the cam into position. Only one of

the two locking pins can be pressed down at a time.

- Cam inside the fork:

The key can only be removed in the Stop or Centre/O󰀨 switching state.

- Cam on the outside of the fork:

The key can also be removed in the Up/Down or On switching state.

- Only ush-mounted inserts with protection against dismounting:

Consider protection against dismounting, see chapter dismounting.

8 8

Produkt Specifikationer

Mærke:	JUNG
Kategori:	Ikke kategoriseret
Model:	134.1

Har du brug for hjælp?

Hvis du har brug for hjælp til JUNG 134.1 stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Ikke kategoriseret JUNG Manualer

20 Juni 2025

19 Juni 2025

19 Juni 2025

18 Juni 2025

18 Juni 2025

18 Juni 2025

JUNG NRSLC0834RT Manual

18 Juni 2025

JUNG CD 5232T3 Manual

18 Juni 2025

JUNG ES5232 Manual

18 Juni 2025

JUNG SL5232 Manual

18 Juni 2025

Ikke kategoriseret Manualer

Nyeste Ikke kategoriseret Manualer

Frigidaire STACKIT3G Manual

20 Juni 2025

Life On Products LCAWA011 Manual

20 Juni 2025

Icom IC-F6330D Manual

20 Juni 2025

Helix AMPLIFY 201 DIRECT Manual

20 Juni 2025

Tekron PTP Translator Manual

20 Juni 2025

Phoenix Gold ZDT-MB2 Manual

20 Juni 2025

OmniMount OCM Manual

20 Juni 2025

Parkside PASA 20-Li C2 Manual

20 Juni 2025

Levenhuk Zeno Desk D7 Manual

20 Juni 2025

OmniMount 75/100 FD Manual

20 Juni 2025