JUNG 2095 EB Manual

JUNG Ikke kategoriseret 2095 EB

Læs gratis den danske manual til JUNG 2095 EB (4 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 2 personer og har en gennemsnitlig bedømmelse på 4.5 stjerner ud af 1.5 anmeldelser. Har du et spørgsmål om JUNG 2095 EB, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/4

KNX Brightness sensor

Ref.-no.: 2095 EB

Operating instructions

Brightness Sensor

1. System information

This device is a product of the instabus EIB-system and complies with

EIBA directives. Detailed technical knowledge obtained in instabus-

training courses is a prerequisite for proper understanding.

Functionality of this device is depending on the software. Detailed

information on loadable software and attainable functionality may be

taken from the manufacturer’s product database.

Planning, installation and commissioning of the unit is done by means of

EIBA certified software.

2. Indications of danger

Caution ! The installation and assembly of electrical equipment may

be carried out only by a skilled person.

3. Function

The brightness sensor detects the value of brightness via the receiver c

(see fig. B) and analyzes and transmits a telegram to the instabus.

Stand: Jun-08 825 238 13

KNX Brightness sensor

Ref.-no.: 2095 EB

4. Connection

The decoder 2 was build as an installation device and is being recessed

into a false ceiling or another hollow body.

It may be installed with 2 screws 4 mm Ø.

For opening the terminal connection box move the locking towards

direction of arrow

3 (fig. A) and open cover f.

For closing terminal connection box shut cover until locking snaps in.

Connect the wires of the receiver line to the decoder as follows:

Terminal S : white wire

Terminal – : blue wire

Terminal + : red wire

The receiver is being recessed by means of a terminal spring

g and an

aperture

h i into the false ceiling (fig. B). Plug the aperture to the front

of the receiver and slide the terminal spring onto the receiver from the

back.

To attach the receiver plug the fastening element

j into one of the tracks

k provided.

Figure A

Figure B

Produkt Specifikationer

Mærke:	JUNG
Kategori:	Ikke kategoriseret
Model:	2095 EB

Har du brug for hjælp?

Hvis du har brug for hjælp til JUNG 2095 EB stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Ikke kategoriseret JUNG Manualer

JUNG 2095 EB Manual

18 Juni 2025

JUNG ME 5232 Manual

18 Juni 2025

JUNG 834.28 G Manual

18 Juni 2025

JUNG NRSLC0834RT Manual

18 Juni 2025

JUNG CD 5232T3 Manual

18 Juni 2025

18 Juni 2025

18 Juni 2025

18 Juni 2025

18 Juni 2025

18 Juni 2025

Ikke kategoriseret Manualer

Nyeste Ikke kategoriseret Manualer

ErgoAV ERMMS1-01B Manual

19 Juni 2025

Xiaomi 5-in-1 Type-C Hub Manual

19 Juni 2025

Akuvox X937 Manual

19 Juni 2025

Sogo SS-23105 Manual

19 Juni 2025

Levenhuk Zeno Multi ML11 Manual

19 Juni 2025

Whirlpool WLX6001DNFF Manual

19 Juni 2025

Tracer GAMEZONE Maxi RGB Manual

19 Juni 2025

DishTV S7070PVR Manual

19 Juni 2025

Antec C5 CURVE ARGB Manual

19 Juni 2025

Essentiel B EGE1 Manual

19 Juni 2025