JUNG ENOLS990-01 Manual

JUNG Ikke kategoriseret ENOLS990-01

Læs gratis den danske manual til JUNG ENOLS990-01 (5 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 18 personer og har en gennemsnitlig bedømmelse på 4.1 stjerner ud af 9.5 anmeldelser. Har du et spørgsmål om JUNG ENOLS990-01, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/5

EnOcean radio transmitter

05.03.20211 / 50024000901

EnOcean radio transmitter

Ref.-no.: ENO A 590 .., ENO LS 990 ..

ENO A 595 .., ENO LS 995 ..

Operating instructions

1 Safety instructions

Electrical devices may only be mounted and connected by electrically skilled persons.

Serious injuries, re or property damage possible. Please read and follow manual fully.

The radio communication takes place via a non-exclusively available transmission path, and is therefore not

suitable for safety-related applications, such as emergency stop and emergency call.

These instructions are an integral part of the product and must remain with the end customer.

2 Device components

Fig. 1: Device components

(1) Adhesive pad

(2) Holder plate

(3) Frames (not included in delivery)

(4) Radio module

(5) Rockers

(6) Retaining screw

Fig. 2 and g. 3: Transport lock and protective lm

(7) Transport lock for rockers

(8) Protective lm for holder plate

EnOcean radio transmitter

05.03.20212 / 50024000901

3 Function

Intended use

- Radio transmitter for the transmission of switching, dimming or shutter commands to radio receivers of the

EnOcean radio system

- Mounting on appliance box according to DIN 49073, screw xing on walls or adhesive xing on smooth, even

surfaces (glass). Adhesive pad included.

Product characteristics

- Battery-free device without external power supply

- Transmitting energy is generated from mechanical energy of actuation (energy harvesting)

- Conguration interface: NFC Forum Type 2 Tag (ISO/IEC 14443 Part 2 + 3)

- Optional: Encrypted transmission with AES-128 and sequence counter

4 Information for electrically skilled persons

Installation and electrical connection

DANGER

Electrical shock on contact with live parts in the installation environment.

Electrical shocks can be fatal.

Before working on the device, disconnect the power and cover live parts in the area!

Installation location

The radio range in buildings is approx. 30 m without wall penetration.

A wall penetration is not recommended, because it attenuates the radio signal too much.

Fig. 4: Installation location

In that case, the receiver may not be able to receive the signal from the transmitter correctly

Metal parts at the installation site (e.g. metal door frames) or moisture (e.g. in outdoor areas) can also have a

negative e󰀨ect on the radio transmission.

Fitting the device

• Fix holder plate (2) with adhesive pad (1) at the installation location. (see section „Adhesive xing“)

Alternatively, screw the holder plate onto an appliance box or directly onto the wall.

Note marking „Top“.

• Push frame (3) onto holder plate.

• Snap radio module (4) onto holder plate.

arrow on sticker (rear side of radio module) points upwards (or „O“ is up and „I“ is down).

• Optional: Secure the radio module with the enclosed screw (6).

• Snap on rockers (5).

Note marking „Top“.

The transport lock (7) behind the rockers must be removed beforehand. (g. 2)

Produkt Specifikationer

Mærke:	JUNG
Kategori:	Ikke kategoriseret
Model:	ENOLS990-01
Antal pr. pakke:	1 stk
Produktfarve:	Elfenben
Produkttype:	vippekontakt
Husmateriale:	Termoplast
Radiofrekvens:	- Mhz