JUNG ESU230-2 Manual

JUNG Ikke kategoriseret ESU230-2

Læs gratis den danske manual til JUNG ESU230-2 (11 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 31 personer og har en gennemsnitlig bedømmelse på 4.8 stjerner ud af 16 anmeldelser. Har du et spørgsmål om JUNG ESU230-2, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/11

Key card holder RFID and energy saving unit

23.07.20201 / 40024018702

Key card holder RFID

Ref.-no.: .. CARD RFID ..

Energy saving unit

Ref.-no.: ESU 230-2

Operating instructions

1 Safety instructions

Electrical devices may only be mounted and connected by electrically skilled persons.

Serious injuries, re or property damage possible. Please read and follow manual fully.

Danger of electric shock. Always disconnect before carrying out work on the devise or load.

These instructions are an integral part of the product, and must remain with the end customer.

2 Device components

Fig. 1: Device components

(1) Energy saving unit

(2) Frame

(3) Key card holder RFID

(4) RGB lens

3 Function

Intended use

- Switching of lighting and other loads

- Triggering of external control systems

- Installation in ush-box according to DIN 49073

Product characteristics

- Operation with RFID cards according to ISO/IEC 14443 and ISO/IEC 15693

- 2 make contacts, one of them with congurable run-on time

- Status indication with RGB lens

- Lens is dimming down 30 s after inserting the card

- Run-on time is signalled by RGB lens after removing the card

Key card holder RFID and energy saving unit

23.07.20202 / 40024018702

4 Operation

Lens lights up blue.

Device is ready for operation.

• Insert card

Outputs 1+2 switch on

Lens lights up green (60 %)

After 30 seconds the lens is dimming down to 10 % brightness

• Remove card

Output 1 switches o󰀨

Lens ashes green for approx. 60 seconds

Lens lights up blue (pilot light)

Output 2 switches o󰀨

RFID

RFID RFID

RFID

30 s 60 s

BL 60 % GN 60 % GN 10 % GN BL 60 %

Fig. 2: Signalling

Signalling

Absence: No card in key card holder.

Lens lights up blue 60 %.

Presence: Card is inserted in key card holder.

Lens lights up green 60 %,

after 30 seconds green 10 %.

Remove card: Lens ashes green, after 60 seconds lights up blue 60 %.

iLens colour, brightness and time/duration can be customized online before ordering. Subsequent changes are

possible with conguration card (ref.no.: CONFIG CARD) which can be ordered separately.

www.jung.de/hotelcard

Stand-by colour: blue, red, green

Stand-by brightness: 0 ... 100 % (60 %)

Activation signal: 0 ... 240 s ( ) 30 s

Run-on time: 0 ... 240 s ( ) 60 s

Brightness “presence”: 0 ... 100 % ( )10 %

Produkt Specifikationer

Mærke:	JUNG
Kategori:	Ikke kategoriseret
Model:	ESU230-2

Har du brug for hjælp?

Hvis du har brug for hjælp til JUNG ESU230-2 stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Ikke kategoriseret JUNG Manualer

5 Juli 2025

20 Juni 2025

19 Juni 2025

19 Juni 2025

18 Juni 2025

18 Juni 2025

18 Juni 2025

JUNG NRSLC0834RT Manual

18 Juni 2025

JUNG CD 5232T3 Manual

18 Juni 2025

JUNG ES5232 Manual

18 Juni 2025

Ikke kategoriseret Manualer

Nyeste Ikke kategoriseret Manualer

Ikan PT4500-TM-V3 Manual

9 Juli 2025

VOREL 74610 Manual

9 Juli 2025

Nokia E3110 Manual

9 Juli 2025

X-Sense XP0A-MR Manual

9 Juli 2025

Eton UG MB 195 L Manual

9 Juli 2025

Philips 42PFH5129 Manual

9 Juli 2025

Ikea PS 2017 806.080.18 Manual

9 Juli 2025

DB Technologies ASX 24 Manual

9 Juli 2025

Antelope Discrete 4 Pro Synergy Core Manual

9 Juli 2025

Philips 32PFL5578 Manual

9 Juli 2025