JUNG FOHSA550595WW Manual

JUNG Ikke kategoriseret FOHSA550595WW

Læs nedenfor 📖 manual på dansk for JUNG FOHSA550595WW (4 sider) i kategorien Ikke kategoriseret. Denne guide var nyttig for 19 personer og blev bedømt med 4.6 stjerner i gennemsnit af 10 brugere

Side 1/4
Friends of Hue radio transmitter
29.03.20221 / 40024003103
Friends of Hue radio transmitter
Ref.-no.: FOH A 595 ..,
FOH LS 995 .., FOH .. 2995-L
Friends of Hue radio transmitter set
Ref.-no.: FOHS A 550 595 ..,
FOHS LS 995 ..
Operating instructions
1 Safety instructions
Electrical devices may only be mounted and connected by electrically skilled persons.
Serious injuries, re or property damage possible. Please read and follow manual fully.
The radio communication takes place via a non-exclusively available transmission path, and is therefore not
suitable for safety-related applications, such as emergency stop and emergency call.
These instructions are an integral part of the product and must remain with the end customer.
2 Device components
Fig. 1: Device components
(1) Adhesive lm
(2) Holder plate
(3) Frame (included in set ref.-no. FOHS ..)
(4) Radio module
(5) Rockers
(6) Retaining screw
Fig. 2 and g. 3: Transport lock and protective lm
(7) Transport lock for rockers
(8) Protective lm for holder plate
1
6
23
4
5
8
7
GB
Friends of Hue radio transmitter
29.03.20222 / 40024003103
3 Function
Intended use
- Smart switch for wireless remote control of Philips Hue lamps
- For switching, dimming and controlling individual light scenes
- For residential use only
- Mounting on appliance box according to EN 60670-1, screw xing on walls or adhesive xing on smooth, even
surfaces (glass). Adhesive lm included.
Product characteristics
- Battery-free device without external power supply
- Transmitting energy is generated from mechanical energy of actuation (energy harvesting)
- Encrypted transmission with device-specic code
- Wireless standard ZigBee Green Power, compatible with Friends of Hue and Apple HomeKit
- Automatic range extension via Philips Hue lamps
- Simple commissioning and conguration via Philips Hue app and Hue Bridge V2 or higher
4 Information for electrically skilled persons
Installation and electrical connection
DANGER
Electrical shock on contact with live parts in the installation environment.
Electrical shocks can be fatal.
Before working on the device, disconnect the power and cover live parts in the area!
Installation location
The radio range in buildings is approx. 20 m without wall penetration.
A maximum of one wall penetration is recommended, because it attenuates the radio signal.
Fig. 4: Installation location
If several walls have to be penetrated the receiver may not be able to receive the signal from the transmitter correctly.
Metal parts at the installation site (e.g. metal door frames) or moisture (e.g. in outdoor areas) can also have a
negative e󰀨ect on the radio transmission. The range can be extended with Philips Hue lamps (in each room).
Fitting the device
Fix holder plate (2) with adhesive pad (1) at the installation location. (see section „Adhesive xing“)
Alternatively, screw the holder plate onto an appliance box or directly onto the wall.
Note marking „Top“.
Push frame (3) onto holder plate.
Snap radio module (4) onto holder plate.
arrow on sticker (rear side of radio module) points upwards (or „O“ is up and „I“ is down).
Optional: Secure the radio module with the enclosed screw (6).
Snap on rockers (5).
Note marking „Top“.
The transport lock (7) behind the rockers must be removed beforehand. (g. 2)


Produkt Specifikationer

Mærke: JUNG
Kategori: Ikke kategoriseret
Model: FOHSA550595WW
Opbevaringstemperatur (T-T): -25 - 65 °C
Driftstemperatur (T-T): -5 - 45 °C
Husmateriale: Plast
Velegnet til indendørsbrug: Ja

Har du brug for hjælp?

Hvis du har brug for hjælp til JUNG FOHSA550595WW stil et spørgsmål nedenfor, og andre brugere vil svare dig