JUNG LA 90 Manual

JUNG Ikke kategoriseret LA 90

Læs gratis den danske manual til JUNG LA 90 (4 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 3 personer og har en gennemsnitlig bedømmelse på 4.8 stjerner ud af 2 anmeldelser. Har du et spørgsmål om JUNG LA 90, eller vil du spørge andre brugere om produktet?

Download PDF
Side 1/4
Brightness sensor
Blinds Management
Brightness sensor
Art.-No.: LA 90
Operationsmanual
1 Safety instructions
Electrical equipment may only be installed and fitted by electrically skilled persons.
Failure to observe the instructions may cause damage to the device and result in fire and
These instructions are an integral part of the product, and must remain with the end
customer.
2 Device components
picture 1: Sun sensor front view
(1) Photodiode
(2) Sun connection terminal
(3) Earth connection terminal
(4) Fastening for strain relief
(5) Sensor cable entry
3 Function
Intended use
- Sensor for brightness detection. Provides a sun protection or twilight function in connection
with covers of the blind system.
- Surface-mounted device for outdoor installation.
1/4
82534113
J:0082534113
30.07.2010
Product characteristics
The sensor supports the following functions of blind covers:
- Sun protection function enables automatic lowering of the blind/shutter when a set
brightness value is exceeded.
Application: sun protection for monitor-equipped workstations, flower windows or
greenhouses.
- Twilight function enables automatic lowering of a blind/shutter when the brightness drops
below as set value.
Application: lowering the blind/shutter at dusk.
4 Information for electrically skilled persons
4.1 Fitting and electrical connection
Mounting and connecting the device
i The sensor cable carries safety extra-low voltage (SELV). Observe fitting instructions
according to VDE 0100.
picture 2: Sun sensor and included accessories.
o Mount the sun sensor using the mounting bracket (8) in position suitable for brightness
measurement with the cable entry facing downwards (picture 2).
o Fasten mounting bracket (8) and housing using supplied screw (6), washer and nut (7).
o Insert sensor cable into the housing from below (5).
o Connect sensor cable to sun (2) and earth (3) terminals (picture 1).
o Secure sensor cable with strain relief (9).
o Push on transparent housing cover (10) from above until it snaps into place and secure
from rear with supplied screw (11) (picture 2).
2/4
82534113
J:0082534113
30.07.2010
Blinds Management
Brightness sensor

Produkt Specifikationer

Mærke: JUNG
Kategori: Ikke kategoriseret
Model: LA 90

Har du brug for hjælp?

Hvis du har brug for hjælp til JUNG LA 90 stil et spørgsmål nedenfor, og andre brugere vil svare dig


Ikke kategoriseret JUNG Manualer

JUNG

JUNG ME 5232 Manual

18 Juni 2025
JUNG

JUNG 834.28 G Manual

18 Juni 2025
JUNG

JUNG NRSLC0834RT Manual

18 Juni 2025
JUNG

JUNG CD 5232T3 Manual

18 Juni 2025
JUNG

JUNG ES5232 Manual

18 Juni 2025
JUNG

JUNG SL5232 Manual

18 Juni 2025
JUNG

JUNG LA 90 Manual

18 Juni 2025
JUNG

JUNG 804.18 W Manual

18 Juni 2025
JUNG

JUNG TR-SREG Manual

18 Juni 2025
JUNG

JUNG 1792HTBT Manual

18 Juni 2025

Ikke kategoriseret Manualer

Nyeste Ikke kategoriseret Manualer

MB Quart

MB Quart MBQT-STG3-1 Manual

18 Juni 2025
Newland

Newland Speedata FG60 Neptune Manual

18 Juni 2025
Festo

Festo DGST-20-30-E1A Manual

18 Juni 2025
Festo

Festo SLS-6-5-P-A Manual

18 Juni 2025
Hoshizaki

Hoshizaki HS-5230 Manual

18 Juni 2025
Gamdias

Gamdias Athena P3 Manual

18 Juni 2025
IOptron

IOptron iEFW-15 Manual

18 Juni 2025
Mercyu

Mercyu MRU-AD006 Manual

18 Juni 2025
Royal Catering

Royal Catering RCGS-1B1600D6 Manual

18 Juni 2025
Keter

Keter Darwin 380L Manual

18 Juni 2025