JUNG LS17180WWM Manual
JUNG
Ikke kategoriseret
LS17180WWM
Læs nedenfor 📖 manual på dansk for JUNG LS17180WWM (16 sider) i kategorien Ikke kategoriseret. Denne guide var nyttig for 11 personer og blev bedømt med 4.7 stjerner i gennemsnit af 6 brugere
Side 1/16

LB management
LB management
LB management
LB managementLB management
Universal automatic switch 1.1 m, Universal automatic switch 2.2 m
Universal automatic switch 1.1 m
Universal automatic switch 1.1 m
Universal automatic switch 1.1 m
Universal automatic switch 1.1 mUniversal automatic switch 1.1 m
Art. no.: ..17181..
Universal automatic switch 2.2 m
Universal automatic switch 2.2 m
Universal automatic switch 2.2 m
Universal automatic switch 2.2 mUniversal automatic switch 2.2 m
Art. no.: ..17281..
Operating instructions
Operating instructions
Operating instructions
Operating instructionsOperating instructions
1
1
1
11 Safety instructions
Safety instructions
Safety instructions
Safety instructionsSafety instructions
Electrical devices may only be mounted and connected by electrically skilled persons.
Electrical devices may only be mounted and connected by electrically skilled persons.
Electrical devices may only be mounted and connected by electrically skilled persons.
Electrical devices may only be mounted and connected by electrically skilled persons.Electrical devices may only be mounted and connected by electrically skilled persons.
Serious injuries, fire or property damage possible. Please read and follow manual fully.
Serious injuries, fire or property damage possible. Please read and follow manual fully.
Serious injuries, fire or property damage possible. Please read and follow manual fully.
Serious injuries, fire or property damage possible. Please read and follow manual fully.Serious injuries, fire or property damage possible. Please read and follow manual fully.
Danger of electric shock. Always disconnect before carrying out work on the device or load. In
Danger of electric shock. Always disconnect before carrying out work on the device or load. In
Danger of electric shock. Always disconnect before carrying out work on the device or load. In
Danger of electric shock. Always disconnect before carrying out work on the device or load. InDanger of electric shock. Always disconnect before carrying out work on the device or load. In
so doing, take all the circuit breakers into account, which support dangerous voltages to the
so doing, take all the circuit breakers into account, which support dangerous voltages to the
so doing, take all the circuit breakers into account, which support dangerous voltages to the
so doing, take all the circuit breakers into account, which support dangerous voltages to theso doing, take all the circuit breakers into account, which support dangerous voltages to the
device and or load.
device and or load.
device and or load.
device and or load.device and or load.
Danger of electric shock. Device is not suitable for disconnection from supply voltage. The load
Danger of electric shock. Device is not suitable for disconnection from supply voltage. The load
Danger of electric shock. Device is not suitable for disconnection from supply voltage. The load
Danger of electric shock. Device is not suitable for disconnection from supply voltage. The loadDanger of electric shock. Device is not suitable for disconnection from supply voltage. The load
is not electrically isolated from the mains even when the device is switched off.
is not electrically isolated from the mains even when the device is switched off.
is not electrically isolated from the mains even when the device is switched off.
is not electrically isolated from the mains even when the device is switched off.is not electrically isolated from the mains even when the device is switched off.
Do not press on the sensor window. Device can be damaged.
Do not press on the sensor window. Device can be damaged.
Do not press on the sensor window. Device can be damaged.
Do not press on the sensor window. Device can be damaged.Do not press on the sensor window. Device can be damaged.
The device is not suitable for use as a burglar alarm or other alarm.
The device is not suitable for use as a burglar alarm or other alarm.
The device is not suitable for use as a burglar alarm or other alarm.
The device is not suitable for use as a burglar alarm or other alarm.The device is not suitable for use as a burglar alarm or other alarm.
These instructions are an integral part of the product, and must remain with the end customer.
These instructions are an integral part of the product, and must remain with the end customer.
These instructions are an integral part of the product, and must remain with the end customer.
These instructions are an integral part of the product, and must remain with the end customer.These instructions are an integral part of the product, and must remain with the end customer.
2
2
2
22 Device components
Device components
Device components
Device componentsDevice components
Figure1: Motion detector cover 1.10m
1 / 16
32599743 12.10.2020
J0082599743

LB management
LB management
LB management
LB managementLB management
Universal automatic switch 1.1 m, Universal automatic switch 2.2 m
Figure2: Motion detector cover 2.20m
(1) FMinsert
(2) Frame
(3) Motion detector cover
(4) Sensor window and status LED
(5) Switch 0 AUTO I
0 AUTO I
0 AUTO I
0 AUTO I0 AUTO I
(6) Button OFF
OFF
OFF
OFFOFF
(7) Button ON
ON
ON
ONON
Status LED
Status LED
Status LED
Status LEDStatus LED
Red LED lights up Self-test
Red LED flashes 3 s on / 3 s off Alarm function active
Red LED flashes 0.5 s on / 0.5 s off Alarm was triggered
Red LED flashes three times followed by a 1 s
pause
Cover was previously connected to another in-
sert
Yellow LED lights up "Continuous off" or "Off for 0.5 - 5 hours" func-
tion active
Yellow LED flashes Presence simulation active
Green LED lights up "Continuous on" or "On for 0.5 - 5 hours" func-
tion active
Blue LED lights up Device is coupled with a mobile end device
and active app
Blue LED flashes 0.5 s on / 0.5 s off Bluetooth coupling mode active
3
3
3
33 Intended use
Intended use
Intended use
Intended useIntended use
– Automatic switching of lighting depending on the heat motion and ambient brightness
– Operation with flush-mounted insert for dimming or switching or 3-wire extension from LB
management
– Wall installation on flush-mounted insert
2 / 16
32599743 12.10.2020
J0082599743
Produkt Specifikationer
Mærke: | JUNG |
Kategori: | Ikke kategoriseret |
Model: | LS17180WWM |
Har du brug for hjælp?
Hvis du har brug for hjælp til JUNG LS17180WWM stil et spørgsmål nedenfor, og andre brugere vil svare dig
Ikke kategoriseret JUNG Manualer

31 December 2025

14 December 2024

10 December 2024

10 December 2024

10 December 2024

10 December 2024

10 December 2024

10 December 2024

10 December 2024

10 December 2024
Ikke kategoriseret Manualer
- Ikke kategoriseret Cane Creek
- Ikke kategoriseret TEF
- Ikke kategoriseret T4E
- Ikke kategoriseret BOHLT
- Ikke kategoriseret Faber
- Ikke kategoriseret Powertec
- Ikke kategoriseret DW
- Ikke kategoriseret Salton
- Ikke kategoriseret Noise Engineering
- Ikke kategoriseret Kyoritsu
- Ikke kategoriseret Stenda
- Ikke kategoriseret Nautilus
- Ikke kategoriseret Gaggia
- Ikke kategoriseret Squarp Instruments
- Ikke kategoriseret Apricorn
Nyeste Ikke kategoriseret Manualer

31 Maj 2025

31 Maj 2025

31 Maj 2025

31 Maj 2025

31 Maj 2025

31 Maj 2025

31 Maj 2025

31 Maj 2025

31 Maj 2025

31 Maj 2025