JUNG LS5232 Manual

JUNG Ikke kategoriseret LS5232

Læs gratis den danske manual til JUNG LS5232 (4 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 79 personer og har en gennemsnitlig bedømmelse på 4.6 stjerner ud af 40 anmeldelser. Har du et spørgsmål om JUNG LS5232, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/4

Centre plate with anti lock-out function, Centre plate with anti lock-out

function and sensor connection

Blinds Management

Centre plate with anti lock-out function

Art. No. : ..5232..

Centre plate with anti lock-out function and sensor connection

Art. No. : ..5232 S..

Operating instructions

1 Safety instructions

Electrical equipment may only be installed and fitted by electrically skilled persons.

Serious injuries, fire or property damage possible. Please read and follow manual fully.

Danger of electric shock. Always disconnect before carrying out work on the devise or

load. At the same time, take into account all circuit breakers that supply dangerous

voltage to the device or load.

Danger of electric shock. Device is not suitable for disconnection from supply voltage.

These instructions are an integral part of the product, and must remain with the end

customer.

2 Device components

Figure 1: Device components

(1) Venetian blind control

(2) Frame

(3) Cover

(4) Status LED

3 Function

Intended use

- Operation of electrically-driven blinds, shutters and awnings

- Operation on control of the Venetian blind control system

Product characteristics

- Status LED

- Lock-out protection

- The individual moving time from the upper end position is storable

1/4

32550723

J:0082550723 16.05.2014

Additional functions for the cover with sensor connection

- Evaluation of a sun sensor

- Brightness threshold adjustable

- Automatic recognition of an outdoor sensor during the first sensor run

Sun protection function for cover with sensor evaluation

The connection of a sun sensor enables automatic shading when it is very bright outside. The

brightness threshold that controls the sun protection can be adjusted on the cover. If the

measured brightness exceeds the predefined brightness threshold for more than 2 minutes, the

Venetian blind moves downwards. The previously stored individual moving time is executed for

an outdoor sensor. The stop position is determined by the sun sensor for an indoor sensor.

iThe sun protection function is only activated if the Venetian blind has been moved to the

upper end position and the control has deactivated automatically after 2 minutes. Each

manual operation deactivates the sun protection.

If the brightness threshold is fallen short of for more than 15 minutes, the Venetian blind moves

back to the upper end position.

4 Operation

Moving the Venetian blind

oPress top or bottom of cover for longer than one second.

The Venetian blind moves in the desired direction to the end position or stops when the

button is pressed again.

Adjusting the slats

oPress top or bottom of cover for shorter than one second.

The slat position changes in the desired direction for as long as the button is pressed.

Activating lock-out protection

The lock-out protection prevents the Venetian blind from automatically moving down

unintentionally. Shutting down on site via the sensors or extensions is disabled.

oPress top of cover for longer than 4 seconds.

Status LED is illuminated. Venetian blind moves to the upper end position, the lock-out

protection is activated.

Deactivating lock-out protection

oPress top button briefly.

Status LED goes out.

The lock-out protection is deactivated.

iAfter a power failure, the lock-out protection is deactivated.

Saving individual moving time

If a Venetian blind should not move to the lower end position "ventilation function" or an outdoor

sensor is used, a shorter moving time can be stored. A time between 0.5 seconds and 2

minutes can be stored.

oPress cover over entire surface for longer than 4 seconds.

The Status LED flashes. The Venetian blind moves automatically to the upper end position.

oKeep the cover pressed in the direction until the Venetian blind is in the desired position.o

oRelease cover.

Venetian blind stops.

oPress cover over entire surface for at least 1 second to store the moving time.

- Or -

oPress cover or to discard the moving time.o n

The storage mode is exited automatically and the LED ceases to be illuminated.

2/4

32550723

J:0082550723 16.05.2014

Blinds Management

Centre plate with anti lock-out function, Centre plate with anti lock-out

function and sensor connection

Produkt Specifikationer

Mærke:	JUNG
Kategori:	Ikke kategoriseret
Model:	LS5232

Har du brug for hjælp?

Hvis du har brug for hjælp til JUNG LS5232 stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Ikke kategoriseret JUNG Manualer

JUNG RCDME2022 Manual

30 Juli 2025

30 Juli 2025

30 Juli 2025

30 Juli 2025

30 Juli 2025

JUNG RCDME2044 Manual

30 Juli 2025

JUNG 1711 DE Manual

30 Juli 2025

JUNG MA1000AD4 Manual

20 Juli 2025

JUNG A1561.07BFFKOANM Manual

20 Juli 2025

JUNG SM1608 Manual

19 Juli 2025

Ikke kategoriseret Manualer

Nyeste Ikke kategoriseret Manualer

LC-Power LC6550B-SI V3.1 Manual

13 August 2025

Adj FX Beam Manual

13 August 2025

Rowenta Gourmet Pro OC7888 Manual

13 August 2025

American Audio ActivePod Manual

13 August 2025

Adj Galaxian Gem LED Manual

13 August 2025

American Audio DCD-PRO600 Manual

13 August 2025

Asus PEN SA201H Manual

13 August 2025

American Audio Revo II Manual

13 August 2025

Rowenta Perfecto Combi ES4210 Manual

13 August 2025

American Audio CPX 12A Manual

13 August 2025