JUNG RTR231 Manual

JUNG Temperaturregulator RTR231

Læs gratis den danske manual til JUNG RTR231 (8 sider) i kategorien Temperaturregulator. Denne vejledning er vurderet som hjælpsom af 14 personer og har en gennemsnitlig bedømmelse på 4.8 stjerner ud af 7.5 anmeldelser. Har du et spørgsmål om JUNG RTR231, eller vil du spørge andre brugere om produktet?

Download PDF
Side 1/8
Room thermostat (heating/cooling) 230 V
Room thermostat (heating/cooling) 230 V
Room thermostat (heating/cooling) 230 V
Room thermostat (heating/cooling) 230 V
Room thermostat (heating/cooling) 230 VRoom thermostat (heating/cooling) 230 V
Art. no.: RTR231
Operating instructions
Operating instructions
Operating instructions
Operating instructionsOperating instructions
1
1
1
11 Safety instructions
Safety instructions
Safety instructions
Safety instructionsSafety instructions
Electrical devices may only be mounted and connected by electrically skilled persons.
Electrical devices may only be mounted and connected by electrically skilled persons.
Electrical devices may only be mounted and connected by electrically skilled persons.
Electrical devices may only be mounted and connected by electrically skilled persons.Electrical devices may only be mounted and connected by electrically skilled persons.
Serious injuries, fire or property damage possible. Please read and follow manual fully.
Serious injuries, fire or property damage possible. Please read and follow manual fully.
Serious injuries, fire or property damage possible. Please read and follow manual fully.
Serious injuries, fire or property damage possible. Please read and follow manual fully.Serious injuries, fire or property damage possible. Please read and follow manual fully.
Danger of electric shock. Always disconnect before carrying out work on the device or load. In
Danger of electric shock. Always disconnect before carrying out work on the device or load. In
Danger of electric shock. Always disconnect before carrying out work on the device or load. In
Danger of electric shock. Always disconnect before carrying out work on the device or load. InDanger of electric shock. Always disconnect before carrying out work on the device or load. In
so doing, take all the circuit breakers into account, which support dangerous voltages to the
so doing, take all the circuit breakers into account, which support dangerous voltages to the
so doing, take all the circuit breakers into account, which support dangerous voltages to the
so doing, take all the circuit breakers into account, which support dangerous voltages to theso doing, take all the circuit breakers into account, which support dangerous voltages to the
device and or load.
device and or load.
device and or load.
device and or load.device and or load.
This manual is an integral part of the product, and must remain with the end customer.
This manual is an integral part of the product, and must remain with the end customer.
This manual is an integral part of the product, and must remain with the end customer.
This manual is an integral part of the product, and must remain with the end customer.This manual is an integral part of the product, and must remain with the end customer.
2
2
2
22 Device components
Device components
Device components
Device componentsDevice components
Figure1: Device components
(1) Room temperature controller insert
(2) Cover frame
(3) Status LED
(4) Central plate
(5) Control knob
(6) Internal temperature sensor
(7) Adjustment rings temperature limit
During renovation work, the temperature sensor (6) must not become dirty or be painted
over.
3
3
3
33 Intended use
Intended use
Intended use
Intended useIntended use
– Electronic room temperature controller for controlling electrothermal valve drives for
230 V~
– Control of the room temperature in closed rooms
– Mounting in appliance box with dimensions according to DIN 49073
4
4
4
44 Product characteristics
Product characteristics
Product characteristics
Product characteristicsProduct characteristics
– Manually setting a comfort temperature
– Manually switching off the temperature control
– Input terminal for activation of ECO temperature via central clock
1 / 8
82404003 04.05.2022
J0082404003
Room thermostat (heating/cooling) 230 V
– Input terminal for activating the cooling mode via central control
– Internal temperature sensor
– Frost protection function
– Silent switching
– Temperature drop detection (adjusting to frost protection temperature when window is
opened)
– Controller output working method: pulse width modulation (PWM) or two-point switchable
– Adaptation to valve type (deenergised opened or deenergised closed, switchable)
– Offset adjustment (correction value for measured temperature)
– Valve protection function (once a week opening and closing of valve)
– Permanent LED operation possible
5
5
5
55 Functional description
Functional description
Functional description
Functional descriptionFunctional description
ECO operation
ECO operation
ECO operation
ECO operationECO operation
In many areas of the building it makes sense for the temperature to be set to a lower ECO tem-
perature at certain times rather than to heat permanently to the comfort temperature. By con-
necting the input terminal to 230 V, the temperature is reduced by 4 °C and the status LEDØ
lights up green. This should be controlled by a central clock. In cooling mode, the wiring of the
input terminal is ignored.Ø
Cooling mode
Cooling mode
Cooling mode
Cooling modeCooling mode
Modern heat pump systems often also provide the option of cooling rooms. In cooling mode, it is
possible to change the cooling temperature using the control knob.
Switching between heating and cooling mode is done via the control knob or by wiring the input
terminal “C” with 230 V.
Temperature drop detection
Temperature drop detection
Temperature drop detection
Temperature drop detectionTemperature drop detection
In the event of a sharp drop in temperature, e.g. after opening a window, the system regulates
to the frost protection temperature of 5°C for a maximum of 30 minutes. Pressing or turning the
control knob cancels the operation.
Offset
Offset
Offset
OffsetOffset
This function allows the adjustment of the position of the control knob so that it corresponds to
the room temperature. Thus, the indication of the temperature via the control button is compar-
able in different rooms. An adaptation of up to +/- 3°C is possible.
Controller adaptation
Controller adaptation
Controller adaptation
Controller adaptationController adaptation
Depending on the heating system, the control behaviour can be adjusted.
Pulse width modulated control
Pulse width modulated control
Pulse width modulated control
Pulse width modulated controlPulse width modulated control (factory setting): Optimised for electrothermal valve drives (see
Technical data): The output is not permanently actuated, but for a time period (pulse width) that
depends on the difference between setpoint and actual temperature. This method brings the ac-
tual temperature gradually closer to the setpoint temperature.
Two-point control
Two-point control
Two-point control
Two-point controlTwo-point control: The output remains switched on until the selected setpoint temperature has
been exceeded by 0.5 °C. The output will not be switched on again until the setpoint value is
undercut by 0.5 °C. Since most heating systems respond very slowly, this type of control can
entail temperature overshooting.
Setting the valve type
Setting the valve type
Setting the valve type
Setting the valve typeSetting the valve type
Depending on the electrothermal valve drive used, an adaptation to the valve type must be
made. There are valve drives where the valve is opened (deenergised opened) or closed (deen-
ergised closed, factory setting) when no supply voltage is applied.
2 / 8
82404003 04.05.2022
J0082404003

Produkt Specifikationer

Mærke: JUNG
Kategori: Temperaturregulator
Model: RTR231

Har du brug for hjælp?

Hvis du har brug for hjælp til JUNG RTR231 stil et spørgsmål nedenfor, og andre brugere vil svare dig


Temperaturregulator JUNG Manualer

JUNG

JUNG TVA230NCWW Manual

1 Oktober 2024
JUNG

JUNG TRGO2 Manual

29 September 2024
JUNG

JUNG TRME2 Manual

19 September 2024
JUNG

JUNG TRDLS923048WW Manual

28 August 2024
JUNG

JUNG TRDLS923048 Manual

28 August 2024
JUNG

JUNG TRDA523048 Manual

28 August 2024
JUNG

JUNG TRDLS923028 Manual

28 August 2024
JUNG

JUNG TRLS231 Manual

13 August 2024
JUNG

JUNG TRDA523028 Manual

2 August 2024
JUNG

JUNG TRSL2 Manual

1 August 2024

Temperaturregulator Manualer

Nyeste Temperaturregulator Manualer

Phoenix Contact

Phoenix Contact MINI MCR-2-RTD-UI Manual

15 Januar 2025
Techno Line

Techno Line WS 9245 Manual

27 December 2024
Techno Line

Techno Line WS 9069 Manual

27 December 2024
Techno Line

Techno Line WS 9003 Manual

27 December 2024
Techno Line

Techno Line WS 9114 Manual

27 December 2024
Techno Line

Techno Line WS 9117 Manual

27 December 2024
Techno Line

Techno Line WS 9900 Manual

27 December 2024
Techno Line

Techno Line MA 10260 Manual

27 December 2024
Techno Line

Techno Line MA 10120 Manual

27 December 2024
Techno Line

Techno Line WS 9172 Manual

27 December 2024