Contents
1 General 4
2 Scope of Delivery 5
3 Intended Use 6
4 Safety Instructions and General Guidelines 7
5 Installation and Connection 12
5.1 Installing and Connecting the Turntable 12
5.1.1 Required Tools and Equipment 12
5.1.2 Unpacking and Preparing 12
5.1.3 Selecting the Installation Location 13
5.1.4 Installing the Cable Gland and Mounting Plate 15
5.1.5 Installation of the Turntable 17
5.1.6 Installing the Turntable 19
5.1.7 Laying the Cables and Connecting the Turntable 20
5.1.8 Functional Instructions for Connection to the On-board Power Supply 21
5.1.9 Connection Example for 12 V Battery Connection 22
5.2 Installation and Connection of the CAP Converter 22
5.2.1 Selection of a Suitable Installation Location 22
5.2.2 Preparing the CAP Converter for Installation 24
5.2.3 Important Instructions for Installation 24
5.2.4 Installing the CAP Converter on the Rear Panel of a TV Set 25
5.2.5 Installing the CAP Converter 26
5.2.6 Connecting the CAP converter 27
5.2.7 Connection Example for 12 V Battery Connection 27
5.3 Installation and Connection of the CTS 650-xx GPS 28
6 Reception Range/Footprint 29
7 Dismantling for Servicing 30
7.1 Dismantling the Turntable 30
7.2 Address of the Service Centre 30
8 Polarisation Setting 31
8.1 About Polarisation Setting 31
8.2 Safety Instructions 32
8.3 Setting Operations 32
9 Manually Lowering the Antenna to Park Position 34
9.1 Safety Instructions 34
9.2 Manually Lowering the Turntable 35
10 Technical Data and Dimensions 36
10.1 Technical Data 36
10.2 Dimensions (in mm) 37
11 Safety Instructions and General Guidelines 39