Use the roto food cutter to slice and
shred such foods as carrot,
cucumber, cabbage, apples, potato
and cheese.
before using your Kenwood
attachment
●Read these instructions carefully and
retain for future reference.
●Remove all packaging.
safety
●Never put your fingers in the feed
tube. Only use the pusher supplied
with the roto food cutter attachment.
●Do not use excessive force to push
the food down the feed tube - you
could damage your attachment.
●Handle the drums with care, they are
extremely sharp.
●Do not touch moving parts.
●Unplug the appliance before fitting or
removing parts or cleaning.
Refer to your main Kitchen Machine
instruction book for additional safety
warnings.
before using for the first time
1 Wash the parts: see ‘Cleaning’.
key
pusher
feed tube and body
drum retainer
drums
to assemble your
roto food cutter
assembly
1 Select a drum. The drums are
numbered at the back and used as
follows:
●Drum No 1 - For fine shredding :-
chocolate, nuts, carrot and cheese.
●Drum No 2 - For coarse
shredding :- chocolate, nuts, carrot
and cheese.
●Drum No 3 - For thin slicing :-
onion, cabbage, cucumber, carrot,
apples, potato and chocolate.
●Drum No 4 - For thick slicing :-
onion, cabbage, cucumber, carrot,
apples, potato, chocolate and
beetroot.
●Drum No 5 (Rasping drum) -
For grating parmesan cheese and
potato for German potato
dumplings.
2 Fit the drum into the body of the
roto food cutter.
3 Lock the drum retainer in position by
turning anti-clockwise until the
locating line is directly underneath
the line on the body .
to use your
roto food cutter
1 Remove the outlet cover by pressing
its top then lifting off .
2 With the roto food cutter in the
position shown , locate in the
outlet. Rotate the roto food cutter so
that the feed tube is upright.
3 Place a collecting vessel beneath the
outlet.
4 Fill the feed tube to prevent food
from slipping sideways during
processing. Switch onto speed 3 - 4
and gently push down with the
pusher. Note: The pusher will only fit
one way.
English
2