Kenwood XM65F Manual


Læs gratis den danske manual til Kenwood XM65F (6 sider) i kategorien Højttaler. Denne vejledning er vurderet som hjælpsom af 21 personer og har en gennemsnitlig bedømmelse på 4.3 stjerner ud af 11 anmeldelser. Har du et spørgsmål om Kenwood XM65F, eller vil du spørge andre brugere om produktet?

Side 1/6
Take the time to read through this instruction manual.
Familiarity with installation and operation procedures will help you obtain the best performance from your new power amplier.
For your records
Record the serial number, found on the back of the unit, in the spaces designated on the warranty card, and in the space provided below. Refer to the
model and serial numbers whenever you call upon your KENWOOD dealer for information or service on the product.
Model XM65F Serial number
Model XM65R Serial number
© 2023 JVCKENWOOD Corporation
XM65F
XM65R
6.5 COAXIAL SPEAKERS DESIGNED AND ENGINEERED TO CONNECT
AND MOUNT TO HARLEY-DAVIDSON® RUSHMORE PLATFORM
TOURING MODEL MOTORCYCLES
INSTRUCTION MANUAL
JVCKENWOOD Corporation
US Residents Only
Register Online
Register your KENWOOD product at https://registerkenwood.us.jvckenwood.com/
Contents
Section 1: XM65F Front Speaker Installation Instructions in FLH (Batwing) Models....2
Section 2: XM65F Road Glide Specific Front Speaker Installation Instructions.............4
Section 3: XM65R Rear Speaker Installation Instructions..................................................4
Warranty Info...............................................................................................................................5
KENWOOD XM65F and XM65R speakers will work best when powered by
an amplier. They have an impedance of 2 ohm and will cause damage if
wired directly to the built-in power of a non-2 ohm stable radio.
2
Section 1 - XM65F Front Speaker Installation
Instructions in FLH (Batwing) Models
Installation procedure
1. With your ignition switch in the “OFF position, remove your outer fairing/headlamp
assembly and set it aside. Refer to a service manual if you need help with this. NOTE:
Placing a towel on the front fender can help prevent scratches or dings” from dropped
tools or fasteners, etc.
2. Speaker Cabinet Removal: On the brake side speaker cabinet, carefully remove the
cable going into the power port/cigarette lighter assembly. If your bike has the CB module
(mounted sideways on the clutch side cabinet), undo the antenna cable and main
harness. The CB module will stay attached to the clutch side cabinet when removed. Undo
the speaker wire plugs going into each cabinet (pink & pink with black stripe wires).
Safety precautionsSafety precautions
CAUTION
To avoid the risk o f human injury or propert y
damage, be sure to read and observe the following
safety precautions:
Consult a professional technician for installing and
connecting the speaker. Incorrect installation may
lead to trac accidents or malfunctions.
Avoid installation where the speaker in unstable.
Make sure that the speaker is stationary and does not
rattle. Displacement of the speaker may cause injury.
Do not modify the speaker. Doing so may result in
smoke or re.
Keep the volume of sound at an optimum level.
Not being able to hear sounds from your surroundings
can lead to trac accidents.
In case of abnormality, stop the use and disconnect
the speaker. If operation is continued, smoke or re
may result. Disconnect the speaker and ask servicing.
Always wear protective eyewear during installation.
To prevent short-circuit, keep all wiring away from
moving parts, sharp edges, cut metal, etc.
When removing or installing the grille, be careful not
to brush the unit with the edge of the grille.
Do not switch ON power until wiring is completed.
FOR PROPER INSTALLATION AND USE
Please read the instructions carefully before using
this speaker:
Be careful not to accidentally kick or apply any sort of
strong impact to the speaker.
To prevent damaging the speaker, turn o the power
of the amplier before connecting it to the speaker.
Do not use the provided parts for other purposes
Otherwise malfunction or re hazard could result.
NOTE
Observe the following cautions to prevent damage
to the speakers:
You cannot input the same power as “peak power
continually.
When the volume is set too high, the sound may be
distorted or abnormal. Reduce the volume promptly in
case of such phenomena.


Produkt Specifikationer

Mærke: Kenwood
Kategori: Højttaler
Model: XM65F

Har du brug for hjælp?

Hvis du har brug for hjælp til Kenwood XM65F stil et spørgsmål nedenfor, og andre brugere vil svare dig