Kramer WM-6P Manual

Kramer Højttaler WM-6P

Læs gratis den danske manual til Kramer WM-6P (4 sider) i kategorien Højttaler. Denne vejledning er vurderet som hjælpsom af 3 personer og har en gennemsnitlig bedømmelse på 4.7 stjerner ud af 2 anmeldelser. Har du et spørgsmål om Kramer WM-6P, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/4

WM- 6P Quick Start

P/N:

2 9 0 0 - 3 0 1 8 4 2 QS

Rev:

Scan to go to website

WM- Start 6P Quick Guide

This guide helps you install and use your WM-6P for the first time.

Go to to download the latest user manual and check if http://www.kramerav.com/downloads/WM 6P-

firmware upgrades are available.

Step 1: Check what’s in the box

1 WM-6P 6.5” two-way Wall Mounted Passive Speaker

1 EasyMount mounting bracket

2 bracket screws

1 pin 4- pluggable Euroblock connector, 28- 12AWG

1 L-Shaped Allen key (M6)

1 Quick start guide

Step 2: -Get to know your WM 6P

# ction Feature Fun

Speaker

Speaker body

EasyMount Bracket

For mounting the bracket in horizontal or vertical position as well as in corners

Mounting bracket screws

For securing the EasyMount bracket to the speaker and adjusting the angle

Terminal connector

4-pin pluggable Euroblock connector, 28-12AWG for connecting the speaker cables

Transformer tap selector

For selecting between 8Ω low-impedance modes and 70V/100V high-impedance modes

75mm VESA mounting threads

Standard 75mm VESA mounting threads for alternative mounting options

Speaker grill

Speaker’s grill

Safety anchor point

Secondary safety anchor point for securing a seismic restraint cable

Step 3: Key Features

• Exceptional sound performance

• -Low impedance (8 impedance (70V/100V) Ω) / high-

• Power handling: 30 W continuous / 45 W peak

• Sensitivity (1W@1m, free field): 90dB SPL

• Maximum SPL (@1m): Continuous 104dB SPL / Peak 106dB SPL

• UL1480A certified

• Eco-friendly mono- material packaging

Step 4: Achieving the Best Performance

To achieve the best performance:

• Use only good quality speaker cables (we recommend Kramer high-performance, BC-2S cables and for plenum

installations we recommend the low smoke halogen free cables, BC-2Sxx/LSHF).

• Do not secure the cables in tight bundles or roll the slack into tight coils

• Avoid interference from neighboring electrical appliances that may adversely influence signal quality

Step 5: Choosing the Best Location

• Plan the location of the speakers based on the designated listening area, the height of the ceiling and dispersion

angle of the speakers.

• Wall Type Suitability: Ensure the wall is appropriate for mounting the speaker weight.

• Obstruction Check: Verify the mounting location is free of obstructions like electrical piping, AC ducts, or water lines.

• Recommended orientation - horizontal installation: Angle the speaker slightly downward towards the listener for

better sound distribution.

• Ceiling Clearance: Avoid placing speakers too close to the ceiling to prevent sound distortion.

• Avoid Reflective Surfaces: Minimize placement near glass, tiles, or other reflective materials to reduce unwanted

echo or reverb.

Step 6: Unpacking

1. Carefully remove the speaker and mounting accessories from the packaging.

2. Inspect all components for damage before proceeding.

3. Dispose of the packaging materials according to regulations.

Step 7: Mounting the Speaker

1. Prepare the speaker cable the recommended location is behind the central hole in the EasyMount bracket– (3).

2. Install the EasyMount bracket in the designated location on the wall, for horizontal and vertical installations use the

designated holes in the back of the bracket (1), for installation in corners use the designated holes for corner installation

(2).

3. Mount the speaker to the EasyMount bracket, secure it with the two screws (4) that are supplied with the speaker.

4. Adjust the required angle of the speaker and tighten the screws with the L-shaped Alan Key (supplied with the speaker),

the friction pads (5) will ensure the speaker is fixed in its location.

Produkt Specifikationer

Mærke:	Kramer
Kategori:	Højttaler
Model:	WM-6P

Har du brug for hjælp?

Hvis du har brug for hjælp til Kramer WM-6P stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Højttaler Kramer Manualer

26 Juni 2025

26 Juni 2025

26 Juni 2025

26 Juni 2025

25 Juni 2025

Kramer Tavor 8-Sub Manual

21 November 2024

Kramer Galil 6-AW Manual

21 November 2024

Kramer Yarden 6-OD Manual

21 August 2024

Kramer GALIL 4-O Manual

21 August 2024

Kramer SPK-C819 Manual

21 August 2024

Højttaler Manualer

Nyeste Højttaler Manualer

Canton GLE 80 S2 Manual

26 Juni 2025

Pro-Ject Speaker Box 12 E Carbon Manual

26 Juni 2025

Canton GLE 20 S2 Manual

26 Juni 2025

Triangle Borea Connect Manual

26 Juni 2025

Edifier Luna HD Eclipse e25HD Manual

26 Juni 2025

Cicada Audio CH65.4V2 Manual

26 Juni 2025

Canton GLE 100 S2 Manual

26 Juni 2025

Sven PS-555 Manual

26 Juni 2025

DB Technologies Opera Unica 12 Manual

26 Juni 2025

DB Technologies Flexsys F12 Manual

26 Juni 2025