La Crosse Technology 617-249V2 Manual

La Crosse Technology Clockradio 617-249V2

Læs gratis den danske manual til La Crosse Technology 617-249V2 (2 sider) i kategorien Clockradio. Denne vejledning er vurderet som hjælpsom af 35 personer og har en gennemsnitlig bedømmelse på 4.8 stjerner ud af 18 anmeldelser. Har du et spørgsmål om La Crosse Technology 617-249V2, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/2

WWVB ATOMIC TI ME SI GNA L

Page | 2 Page | 3 Page | 4

1.8” LED Atomic Clock

with Dual Alarms and USB Charging

Model: 617-249v2

DC:062220

PO W ER UP

1. Insert the provided stand into bottom of clock.

2. Insert the 5.0 volt power cord into an outlet, then into your

clock. Remove the insulation tab from the CR2032 battery.

1. Press then release the SET button to enter the Settings Menu.

2. Press and release the + or - buttons to adjust the values.

Hold to adjust quickly.

3. Press and release the SET button to conﬁrm and move to the next

item.

Settings Menu Order:

• Time Zone

• DST ON/OFF

• Hour

• Minutes

• Snooze Duration

SE TTINGS

FIND FAQS, AND MORE UNDER THE TAB HERE:SUPPORT

bit.ly/617-249

1 X CR2032

LITHIUM BATTERY

(INCLUDED)

5.0 V adapter

(included)

IMPORTANT: When powered on, the clock will immediately search for

the WWVB Atomic Time SIgnal for 7 minutes.

• Hold the ATOMIC button for 3 seconds to stop or start the search.

• During the atomic time search the buttons will not function.

• Backlight will dim.

• USB charge port will not work.

Signal Search Indicator:

• Receiving strong WWVB signal: LED ﬂashing

• Successful Reception: LED solid

• Failed Reception: LED disappears

The clock will automatically search for the WWVB signal every night

at 1:00 am, 2:00 am and 3:00 am. If there is still no WWVB reception,

the clock will search WWVB time signal again at 4:00 am and 5:00 am

alternatively.

For best WWVB Atomic Time Signal Reception: Please keep your clock

three feet away from electrical outlets and other electronics, to avoid

interference.

AL A RM 1 & 2

In one setting for Alarm 1 & 2 you are able to::

• Set Alarm Time

• Activate/Deactivate Alarm

• Select Volume (HI/LO)

Note: A1 A2 The Blue LED Light next to the or indicates alarm is active.

Set Alarm 1 & 2:

1. Press then release the ALM 1 • 2 button to enter the Alarm Settings.

2. Press and release the + or - buttons to adjust the values. Hold to

adjust quickly.

3. Press and release the ALM 1 • 2 button to conﬁrm and move to the

next item.

Alarm Settings Order:

• Alarm 1 Hour

• Alarm 1 Minutes

• Alarm 1 OFF/ON

• Alarm 1 HI/LO (volume)

• Alarm 2 Hour

• Alarm 2 Minutes

• Alarm 2 OFF/ON

• Alarm 2 HI/LO (volume)

Stop Alarm for 1 Day:

When alarm sounds. press the ALM 1 • 2 button once to stop the alarm

and reset to come on in 24 hours.

Snooze:

When alarm is sounding, press once, the alarm will be silenced

and come on again after the snooze duration selected.

Tip: if your second alarm activates while the ﬁrst alarm is sounding or it is

in the snooze mode, the second alarm overrides the ﬁrst alarm (the ﬁrst

alarm is reset to come on the next day).

WA RRAN TY & F CC STATE M ENT

CARE + MAINTEN A NCE

WARNING:

1. This product may use a Button Cell Battery.

2. If swallowed, it could cause severe injury or death in just 2 hours.

3. Seek medical attention immediately.

AVERTISSEMENT:

1. Cet article contient une pile bouton.

2. De graves blessures ou la mort pourraient suivre dans les deux

heures Suivant l’ingestion.

3. Demander l’aide de professionnels de la santé sur le champ.

WARNING - KEEP BATTERIES OUT OF REACH OF CHILDREN

1. Swallowing may lead to serious injury in as little as 2 hours or

death, due to chemical burns and potential perforation of the

oesophagus.

2. If you suspect your child has swallowed or inserted a button

battery, immediately seek urgent medical assistance.

3. Examine devices and make sure the battery compartment is

correctly secured, e.g. that the screw or other mechanical fastener

is tightened.

4. Do not use if compartment is not secure.

5. Dispose of used button batteries immediately and safely. Flat

batteries can still be dangerous.

6. Tell others about the risk associated with button batteries and how

to keep their children safe.

WE’RE HERE TO H ELP!

SPECIFICATI O NS

Power Requirements: AC6 HX075-0501200-AU-001 5 volt adapter

CR2032 battery (included)

Battery Life: Over 12 months

USB output: 1A maximum current.

Alarm duration: 2 minutes

Snooze duration 5-60 minutes programmable.

Dimensions: 6.74” L x 1.52” W x 3.43” H (17.12cm L x 3.86cm W x 8.71cm H)

Page | 6 Page | 7 Page | 8Page | 5

Ask questions, watch detailed setup videos, and provide feedback on

our social media outlets!

JOIN THE CONVE R SATION

US B CH AR GI N G PORT

Note: This is a power-output charging port. It does not provide power to

the alarm clock.

• Connect your external device’s USB charging cable

(not included) to the USB charging port.

• Charging times will vary.

• USB Power Output: 1A maximum current.

• Charge 1A devices or devices that are self- regulating.

WARNING: This product can expose you to chemicals including

styrene, which is known to the State of California to cause cancer.

For more information go to: www.P65Warnings.ca.gov

If you require additional support, get in touch with our friendly customer

support team based out of La Crosse, WI.

Phone: 1-608-782-1610

Online: bit.ly/contact_techsupport

Our knowledgeable customer support team is available:

Monday-Friday, 8am-6pm CST.

WARR A NT Y INFO

La Crosse Technology, Ltd. provides a (from date of purchase) on this product 1-year limited time warranty

relating to manufacturing defects in materials & workmanship.

La Crosse Technology, Ltd., 2830 S. 26th St., La Crosse, WI 54601

For Full Warranty Details, Visit: www.lacrossetechnology.com/support

CA R E + MAINT E NAN C E

• Do not mix old and new batteries.

• Do not mix Alkaline, Lithium, standard, or rechargeable batteries.

• Always purchase the correct size and grade of battery most suitable for intended use.

• Clean the battery contacts and also those of the device prior to battery installation.

• Ensure the batteries have with correct polarity (+ / -).

• Remove batteries from equipment that will not to be used for an extended period.

• Promptly remove expired batteries.

FC C S TAT E MEN T

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant

to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful

interference in a residential installation. This equipment generates, uses and can radiate radio frequency

energy and, if not installed and used in accordance with the instructions, may cause harmful interference

to radio communications. However, there is no guarantee that interference will not occur in a particular

installation. If this equipment does cause harmful interference to radio or television reception, which can be

determined by turning the equipment off and on, the user is encouraged to try to correct the interference by

one or more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

• Consult the dealer or an experienced radio/TV technician for help.

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

(1) This device may not cause harmful interference, and

(2) This device must accept any interference received, including interference that may cause undesired

operation.

CAUTION!

Any changes or modifications not expressly approved by the party responsible for compliance could void the

user’s authority to operate the equipment.

using electronic, mechanical or chemical process without the written permission

of the publisher.

This booklet may contain errors or misprints. The information it contains is regularly checked and corrections

are included in subsequent editions. We disclaim any responsibility for any technical error or printing error, or

their consequences. All trademarks and patents are recognized.

Note: USB charging will momentarily turn o when the clock searches

for the WWVB Atomic Time Signal. Charging will resume after WWVB

Atomic Time Reception is completed.

AD JUSTABLE B ACK L I GH T H I - LO- O F F

• Press to adjust the brightness (HI/ LO/OFF) of your clock.

• This can only be done when the unit is not sounding or searching for

the atomic time signal.

Produkt Specifikationer

Mærke:	La Crosse Technology
Kategori:	Clockradio
Model:	617-249V2

Har du brug for hjælp?

Hvis du har brug for hjælp til La Crosse Technology 617-249V2 stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Clockradio La Crosse Technology Manualer

La Crosse Technology WT522 Manual

7 Juli 2025

La Crosse Technology 70940PINK Manual

30 December 2025

La Crosse Technology 30040 Manual

30 December 2025

La Crosse Technology 14075 Manual

5 December 2024

La Crosse Technology 70940 Manual

5 December 2024

La Crosse Technology 70940GRAY Manual

5 December 2024

La Crosse Technology 30029-USB Manual

5 December 2024

La Crosse Technology 75902 Manual

5 December 2024

La Crosse Technology 617-2916 Manual

4 Oktober 2024

La Crosse Technology 617-710 Manual

2 Oktober 2024

Clockradio Manualer

Nyeste Clockradio Manualer

Techno Line WT 487 Manual

1 August 2025

Techno Line WT 221 T Manual

1 August 2025

Techno Line Modell 3XL Manual

1 August 2025

Techno Line WS 8056 Manual

1 August 2025

Proscan PCR1420 Manual

30 Juli 2025

TechniSat DigiClock 3 Manual

28 Juli 2025

Marquant YCK-239 Manual

24 Juli 2025

Sony Dream Machine ICF-CD3IP Manual

22 Juli 2025

Sony Dream Machine ICF-C115L Manual

21 Juli 2025

Sony Dream Machine ICF-CD7000 Manual

21 Juli 2025