La Crosse Technology WS-8017U-MAH Manual


Læs gratis den danske manual til La Crosse Technology WS-8017U-MAH (9 sider) i kategorien Vækkeur. Denne vejledning er vurderet som hjælpsom af 34 personer og har en gennemsnitlig bedømmelse på 4.9 stjerner ud af 17.5 anmeldelser. Har du et spørgsmål om La Crosse Technology WS-8017U-MAH, eller vil du spørge andre brugere om produktet?

Side 1/9
Indoor temperature display
WS-8017U Outdoor temperature display via 433MHz transmission
ATOMIC CLOCK WITH OUTDOOR WIRELESS TEMPERATURE
Instruction Manual
Holder
Hanging holes
Battery cover
LCD1
display
LCD2
display
Foldable stand
Foldable stand
Wall mount or freestanding
OUTDOOR TEMPERATURE TRANSMITTER:
INTRODUCTION:
Congratulations on purchasing this state-of-the-art Atomic Clock as an example of superior design
and engineering. Providing WWVB radio-controlled time, date, time zone, indoor and outdoor
temperature display, this innovative clock is ideal for home or office use. Operation of this product is
simple and straightforward. By reading this operating manual, the user will however receive a better
understanding of the Atomic Clock together with the optimum benefit of all its features.
FEATURES:
ATOMIC CLOCK:
Remote transmission of outdoor temperature to the Atomic clock by 433 MHz signals
Wall mounting case
TO INSTALL AND REPLACE BATTERIES IN THE ATOMIC CLOCK
The Atomic Clock uses 2 x AA, 1. e the batteries, please follow the 5V batteries. To install and replac
steps below:
1. Insert finger or other solid object in the space at the bottom center of the battery compartment
and lift up to remove the cover.
2. Insert batteries observing the correct polarity (see marking).
3. Replace compartment cover.
Function keys
DO NOT SET THE CLOCK.
WWVB Radio controlled time with manual time setting
TO INSTALL AND REPLACE BATTERIES IN THE TEMPERATURE TRANSMITTER
12/24 hour time display
The transmitter uses 2 x AA,1.5V batteries. To in ries, please follow the stall and replace the batte
steps below:
Time display: hour, minute, second
Alarm setting with snooze function 1. Remove the cover.
Calendar display 2. Insert the batteries, observing the correct polarity (see marking).
Weekday display (3 languages to choose from: English, French and Spanish) 3. Replace the battery cover on the unit.
Time zone setting Alkaline batteries are recommended for use in both units. Avoid using rechargable batteries.
Daylight savings time ON/OFF option (DST)
ºC or ºF temperature display selectable
To display the alarm time in normal mode display
Alkaline batteries are recommended for use in both units. Avoid using rechargable
batteries.
To exit the setting modes
ATOMIC CLOCK LCD SCREEN DESCRIPTIONS
The Atomic Clock's LCD is divided into 2 sections and once the batteries are inserted, all the
segments will light up briefly before displaying the information for time, date, indoor and outdoor
temperatures.
Do not set the clock until the outdoor temperature is displayed.
1. Place batteries in the outdoor transmitter first, then into the atomic clock. DO NOT
PRESS ANY BUTTONS FOR 10 MINUTES.
Indoor temperature or seconds display Weekday or seconds display
2. After the 10 minutes both the Indoor and Outdoor areas on your clock should have a
temperature showing. If not, remove both sets of batteries, wait 5 minutes and repeat step one.
3. After the clock receives the outdoor temperature, set your time zone using the manual
settings below. The default time zone is Eastern Standard Time.
4. After the clock receives the outdoor temperature the WWVB time code reception will
automatically start. This reception typically takes between 5-10 minutes in good conditions. If
after 10 minutes the WWVB time has not been received, use the SET key to manually enter the
set mode and change either the time or date in order to activate the WWVB reception (see
manual settings below). The clock will then automatically attempt to receive the WWVB time
from 12:00 am through 6:00 am each day (attempts WWVB reception every full hour within this
time frame). When this is successful, the received time will override the manually set time. The
date is also updated with the received time (Please refer to notes on “Radio controlled time
and “Manual time setting”).
Note:
In the event of changing batteries of the unit ensure that the batteries do not spring free from the
contacts. Always wait at least 5 minutes after removing the batteries before reinserting, otherwise
start up and transmission problems may occur.
FUNCTION KEYS
The Atomic Clock has four easy to use keys:
SET key : To enter into the set mode for the following functions: time zone, DST ON/OFF
(daylight saving time), language, hour, minute, year, month, day, weekday, 12/24
hour, ºC or ºF temperature display
+ key : To toggle between the second, temperature or weekday display
To change any values in manual set mode
ALM key : To enter into the alarm set mode
To set the alarm ON/OFF
SNZE key : To activate the snooze function during alarm
Outdoor temperature display
Date
A
larm icon
Radio reception icon
WWVB time
MANUAL SETTINGS
Note:
If the Atomic Clock has already successfully received the WWVB time signal and displays the
correct time and date, then the Manual settings can be omitted.
After completion of the above described procedures in “Setting up” the manual setting modes can
be entered by pressing and holding the SET key for 3 seconds. The following settings can now be
programmed:
Time zone setting
DST ON/OFF
Language display setting
Manual time setting
Year setting
Month setting
SETTING UP:


Produkt Specifikationer

Mærke: La Crosse Technology
Kategori: Vækkeur
Model: WS-8017U-MAH

Har du brug for hjælp?

Hvis du har brug for hjælp til La Crosse Technology WS-8017U-MAH stil et spørgsmål nedenfor, og andre brugere vil svare dig