Lantronix EPS2-100 Manual

Lantronix Printserver EPS2-100

Læs gratis den danske manual til Lantronix EPS2-100 (223 sider) i kategorien Printserver. Denne vejledning er vurderet som hjælpsom af 7 personer og har en gennemsnitlig bedømmelse på 4.9 stjerner ud af 4 anmeldelser. Har du et spørgsmål om Lantronix EPS2-100, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/223

Print Server Reference Manual

For the Lantronix Family of Ethernet Print Servers

The information in this guide may change without notice. The manufacturer assumes no responsibility for any errors

which may appear in this guide.

UNIX is a registered trademark of The Open Group. Ethernet is a trademark of XEROX Corporation. DEC and LAT

are trademarks of Digital Equipment Corporation. Centronics is a registered trademark of Centronics Data Computer

Corp. PostScript is a trademark of Adobe Systems, Inc. NetWare is a trademark of Novell Corp. AppleTalk, Chooser,

and Macintosh are trademarks of Apple Computer Corp. LaserJet and Bitronics are trademarks of Hewlett Packard.

Windows is a trademark of Microsoft.

in any form or by any means without the written permission of Lantronix. Printed in the United States of America.

The revision date for this manual is 30, October 2000.

Part Number: 900-065A

Rev. A

WARNING

This equipment has been tested and found to comply with the limits for a Class A digital device pursuant to Part 15 of

FCC Rules. These limits are designed to provide reasonable protection against such interference when operating in a

commercial environment. This equipment generates, uses, and can radiate radio frequency energy, and if not installed

and used in accordance with this guide, may cause harmful interference to radio communications.

Operation of this equipment in a residential area is likely to cause interference in which case the user, at his or her own

expense, will be required to take whatever measures may be required to correct the interference.

Changes or modifications to this device not explicitly approved by Lantronix will void the user’s authority to operate

this device.

Cet appareil doit se soumettre avec la section 15 des statuts et règlements de FCC. Le fonctionnement est subjecté aux

conditions suivantes:

(1) Cet appareil ne doit pas causer une interférence malfaisante.

(2) Cet appareil doît accepter n'importé quelle interférence reìue qui peut causer uneopération indésirable.

Produkt Specifikationer

Mærke:	Lantronix
Kategori:	Printserver
Model:	EPS2-100
Bredde:	263 mm
Dybde:	136 mm
Højde:	50 mm
Vægt:	950 g
Pakkevægt:	1600 g
Pakkedybde:	128.6 mm
Pakkebredde:	287 mm
Pakkehøjde:	210 mm
Opbevaringstemperatur (T-T):	-40 - 66 °C
Ethernet LAN-porte (RJ-45):	1
Driftstemperatur (T-T):	5 - 50 °C
Certificering:	FCC A, C/UL, TUV, CE
DC-in-stik:	Ja
Webbaseret administration:	Ja
LED-indikatorer:	Ja
Effektkrav:	90 - 250V, 50/60 Hz
I/O-porte:	2 x Centronics/Bitronics (DB25)\n2 x S-423/232 (RJ45)\n1 x 10/100Base-T (RJ45)
Administrationsprotokoller:	SNMP, DHCP, Telnet, HTTP
Netværksfunktioner:	10/100BaseT(X)
Understøttede protokoller:	CP/IP, IPX, AppleTalk, NetBIOS/NetBEUI, NDS, NDPS, LAT \nARP, RARP, ICMP, SNMP, BOOTP, DHCP, TFTP, LPR, Telnet, HTTP
Dataoverførselshastighed:	0.23 Mbit/s
Understøttede dataoverførselshastigheder:	300bps, 150 Kbps
Antal parallelle porte:	2
Netværksforbindelsestype:	Ethernet LAN