Lincoln Electric Fleet 650 Manual

Lincoln Electric Ikke kategoriseret Fleet 650

Læs gratis den danske manual til Lincoln Electric Fleet 650 (37 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 60 personer og har en gennemsnitlig bedømmelse på 4.9 stjerner ud af 30.5 anmeldelser. Har du et spørgsmål om Lincoln Electric Fleet 650, eller vil du spørge andre brugere om produktet?

Download PDF
Side 1/37
Operator’s Manual
Fleet
™
650
Register your machine:
www.lincolnelectric.com/register
Authorized Service and Distributor Locator:
www.lincolnelectric.com/locator
IM10351 | Issue D ate Feb-16
© Lincoln Global, Inc. All Rights Reserved.
For use with machines having Code Numbers:
12512
Need Help? Call 1.888.935.3877
to talk to a Service Representative
Hours of Operation:
8:00 AM to 6:00 PM (ET) Mon. thru Fri.
After hours?
Use “Ask the Experts” at lincolnelectric.com
A Lincoln Service Representative will contact you
no later than the following business day.
For Service outside the USA:
Email: globalservice@lincolnelectric.com
Save for future reference
Date Purchased
Code: (ex: 10859)
Serial: (ex: U1060512345)
THANK YOU FOR SELECTING
A QUALITY PRODUCT BY
LINCOLN ELEC TRIC.
PLEASE EXAMINE CARTON AND EQUIPMENT FOR
DAMAGE IMMEDIATELY
When this equipment is shipped, title passes to the purchaser
upon receipt by the carrier. Consequently, claims for material
damaged in shipment must be made by the purchaser against the
transportation company at the time the shipment is received.
SAFETY DEPENDS ON YOU
Lincoln arc welding and cutting equipment is designed and built
with safety in mind. However, your overall safety can be increased
by proper installation ... and thoughtful operation on your part.
DO NOT INSTALL, OPERATE OR REPAIR THIS EQUIPMENT
WITHOUT READING THIS MANUAL AND THE SAFETY
PRECAUTIONS CONTAINED THROUGHOUT. And, most importantly,
think before you act and be careful.
This statement appears where the information must be followed
exactly to avoid serious personal injury or loss of life.
This statement appears where the information must be followed
to avoid minor personal injury or damage to this equipment.
KEEP YOUR HEAD OUT OF THE FUMES.
DON’T get too close to the arc.
Use corrective lenses if necessary
to stay a reasonable distance
away from the arc.
READ and obey the Safety Data
Sheet (SDS) and the warning label
that appears on all containers of
welding materials.
USE ENOUGH VENTILATION or
exhaust at the arc, or both, to
keep the fumes and gases from
your breathing zone and the general area.
IN A LARGE ROOM OR OUTDOORS, natural ventilation may be
adequate if you keep your head out of the fumes (See below).
USE NATURAL DRAFTS or fans to keep the fumes away
from your face.
If you de velop unusual symptoms, see your supervisor.
Perhaps the welding atmosphere and ventilation system
should be checked.
WEAR CORRECT EYE, EAR &
BODY PROTECTION
PROTECT your eyes and face with welding helmet
properly fitted and with proper grade of filter plate
(See ANSI Z49.1).
PROTECT your body from welding spatter and arc
flash with protective clothing including woolen
clothing, flame-proof apron and gloves, leather
leggings, and high boots.
PROTECT others from splatter, flash, and glare
with protective screens or barriers.
IN SOME AREAS, protection from noise may be appropriate.
BE SURE protective equipment is in good condition.
Also, wear safety glasses in work area
AT ALL TIMES.
SPECIAL SITUATIONS
DO NOT WELD OR CUT containers or materials which previously
had been in contact with hazardous substances unless they are
properly cleaned. This is extremely dangerous.
DO NOT WELD OR CUT painted or plated parts unless special
precautions with ventilation have been taken. They can release
highly toxic fumes or gases.
Additional precautionary measures
PROTECT compressed gas cylinders from excessive heat,
mechanical shocks, and arcs; fasten cylinders so they cannot fall.
BE SURE cylinders are never grounded or part of an
electrical circuit.
REMOVE all potential fire hazards from welding area.
ALWAYS HAVE FIRE FIGHTING EQUIPMENT READY FOR
IMMEDIATE USE AND KNOW HOW TO USE IT.
WARNING
CAUTION
Safety 01 of 04 - 5/16/2018

Produkt Specifikationer

Mærke: Lincoln Electric
Kategori: Ikke kategoriseret
Model: Fleet 650

Har du brug for hjælp?

Hvis du har brug for hjælp til Lincoln Electric Fleet 650 stil et spørgsmål nedenfor, og andre brugere vil svare dig


Ikke kategoriseret Lincoln Electric Manualer

Lincoln Electric

Lincoln Electric NA-3 Manual

24 September 2025
Lincoln Electric

Lincoln Electric VRTEX 360 Manual

24 September 2025
Lincoln Electric

Lincoln Electric VRTEX Mobile Manual

24 September 2025
Lincoln Electric

Lincoln Electric Easy MIG 140 Manual

23 September 2025
Lincoln Electric

Lincoln Electric Magnum Pro 100SG Manual

23 September 2025
Lincoln Electric

Lincoln Electric Utility Cart Manual

23 September 2025
Lincoln Electric

Lincoln Electric Master Load 750 Manual

8 September 2025
Lincoln Electric

Lincoln Electric LINCGUN PROMIG AIR Manual

8 September 2025
Lincoln Electric

Lincoln Electric OMNIShield Faceshield Manual

7 September 2025
Lincoln Electric

Lincoln Electric Linc-Cut 3015 CNC Fiber Laser Manual

20 Juli 2025

Ikke kategoriseret Manualer

Nyeste Ikke kategoriseret Manualer

Muse

Muse M-920 DMO Manual

1 Oktober 2025
Vestil

Vestil AHS-4-15-7 Manual

1 Oktober 2025
Vestil

Vestil ALLW-2020-FWFL Manual

1 Oktober 2025
Vestil

Vestil LM-OBNT-6-36 Manual

1 Oktober 2025
Vestil

Vestil AHSN-6-15-7 Manual

1 Oktober 2025
NEO Tools

NEO Tools 10-711 Manual

1 Oktober 2025
Axxess

Axxess AX-TOYUSB Manual

1 Oktober 2025
Vestil

Vestil AHSN-4-15-9 Manual

1 Oktober 2025
Vestil

Vestil AHS-2-10-12-VG Manual

1 Oktober 2025
Axxess

Axxess AXDI-CL2 Manual

1 Oktober 2025