Lincoln Electric Magnum Pro 100SG Manual

Lincoln Electric Ikke kategoriseret Magnum Pro 100SG

Læs gratis den danske manual til Lincoln Electric Magnum Pro 100SG (118 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 3 personer og har en gennemsnitlig bedømmelse på 4.3 stjerner ud af 2 anmeldelser. Har du et spørgsmål om Lincoln Electric Magnum Pro 100SG, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/118

FORENGINE

powered equipment.

1.a. Turn theengineoffbeforetroubleshootingandmaintenance

work unless themaintenanceworkrequiresittoberunning.

____________________________________________________

1.b.Operate engines in open, well-ventilated

areas or vent th

eengineexhaustfumes

outdoors.

____________________________________________________

1.c. Do not add thefueln

earanopenflameweld-

ing arcorwhentheengineisrunning.Stop

theengineandallowittocoolbeforerefuel-

ingtopreventspilledfuelfromvaporizingon

contact with hotenginepartsandigniting.Do

notspillfuelwhenfillingtank.Iffuelisspilled,

wipe it up anddonotstartengineuntilfumes

have been eliminated.

____________________________________________________

1.d. Keep allequip

mentsafetyguards,coversanddevicesinposi-

tion andingoodrepair.Keephands,hair,clothingandtools

away from V-belts, gears, fans and allothermovingparts

when starting, operating or repairin g equipment.

____________________________________________________

1.e. In some cases it maybenece

ssarytoremovesafety

guardstoperform required maintenance. Remove

guards only when necessary andreplacethemwhenthe

maintenance requiringtheir removaliscomplete.

Always use thegreatestcarewhenworkingnearmoving

parts.

___________________________________________________

1.f. Do not putyourh

andsneartheenginefan.

Do notattempttooverridethegovernoror

idler by pushing on thethrottlecontrolrods

while theengineisrunning.

___________________________________________________

1.g. To prevent accidentally starting gasoline engines while

turning theengin

eorweldinggeneratorduringmaintenance

work, disconnect thesparkplugwires,distributorcap or

magneto wire as appropriate.

SAFETY

ARC WELDING CANBEHAZARDOUS. PROTECTYOURSELF AND OTHERS FROM POSSIBLE SERIOUS INJURY OR DEATH.

KEEP CHILDRENAWAY.PACEMAKERWEARERS SHOULD CONSULT WITH THEIR DOCTOR BEFORE OPERATING.

Read andunderstandthefollowingsafetyhighlights.Foradditional safety information, it is strongly recommended that you

purchase a copy of “Safety in Welding & Cutting - ANSI Standard Z49.1” from theAmericanWelding Society, P .O. Box 351040,

Miami, Florida33135orCSAStandardW117.2-1974.AFreecopyof“ArcWelding Safety” booklet E205isavailable from the

Lincoln Electric Company, 22801 St.ClairAvenue,Cleveland,Ohio 44117-1199.

BE SURE THAT ALL INSTALLATION, OPERATION, MAINTENANCE AND REPAIR PROCEDURESARE

PERFORMED ONLY BY QUALIFIED INDIVIDUALS.

WARNING

ELECTRIC AND

MAGNETIC FIELDS

maybedangerous

2.a. Electric currentflowingthrough any conductor causes

localizedElectric and Magnetic Fields (EMF). Welding

currentcreates EMF fieldsaround welding cables and

welding machines

2.b. EMF fields may interfere with some pacemakers, and

welders having a pacemaker should consult their physician

before welding.

2.c. Exposure to EMFfieldsinweldingmayhaveotherhealth

effects which are now notknown.

2.d. Allweldersshoulduse thefollowingproceduresinorderto

minimize exposure to EMFfieldsfromtheweldingcircuit:

2.d.1.

Route the electrode and workcablestogether - Secure

them with tape when possible.

2.d.2. Never coiltheelectrode lead around your body.

2.d.3. Do notplaceyourbodybetweentheelectrodeand

work cables. If theelectrodecableisonyourright

side, theworkcableshouldalsobeonyourrightside.

2.d.4. Connect theworkcabletotheworkpieceascloseas

possible to theareabeingwelded.

2.d.5. Do notworknexttoweldingpowersource.

1.h. To avoid scalding, do notremovethe

radiator pressure capwhentheengineis

hot.

For Diesel Engines: Diesel engine exhaust and

some of itsconstituentsareknowntotheState

of California to cause cancer, birth defects, and

other reproductive harm.

For Gasoline Engines: The engine exhaust from

this product contains chemicals knowntothe

StateofCaliforniatocause cancer, birth defects,

or other reproductive harm.

CALIFORNIAPROPOSITION65WARNINGS

• Sales and Service through Subsidiaries and Distributors Worldwide •

Cleveland, Ohio 44117-1199 U.S.A. TEL: 216.481.8100 FAX: 216.486.1751 WEB SITE: www.lincolnelectric.com

• World's Leader in Welding and Cutting Products •

MAGNUM

PRO 100SG SPOOL GUN

OPERATOR’S MANUAL

IMT10137

November, 2012

Safety Depends on You

Lincoln arc welding and cutting

equipment is designed and built

with safety in mind. However,

your overall safety can be

increased by proper installation ...

and thoughtful operation on your

part. DO NOT INSTALL, OPER-

ATE OR REPAIR THIS EQUIP-

MENT WITHOUT READING

THIS MANUAL AND THE

SAFETY PRECAUTIONS CON-

TAINED THROUGHOUT. And,

most importantly, think before you

act and be careful.

FORENGINE

powered equipment.

1.a. Turn theengineoffbeforetroubleshootingandmaintenance

work unless themaintenanceworkrequiresittoberunning.

____________________________________________________

1.b.Operate engines in open, well-ventilated

areas or vent th

eengineexhaustfumes

outdoors.

____________________________________________________

1.c. Do not add thefueln

earanopenflameweld-

ing arcorwhentheengineisrunning.Stop

theengineandallowittocoolbeforerefuel-

ingtopreventspilledfuelfromvaporizingon

contact with hotenginepartsandigniting.Do

notspillfuelwhenfillingtank.Iffuelisspilled,

wipe it up anddonotstartengineuntilfumes

have been eliminated.

____________________________________________________

1.d. Keep allequip

mentsafetyguards,coversanddevicesinposi-

tion andingoodrepair.Keephands,hair,clothingandtools

away from V-belts, gears, fans and allothermovingparts

when starting, operating or repairin g equipment.

____________________________________________________

1.e. In some cases it maybenece

ssarytoremovesafety

guardstoperform required maintenance. Remove

guards only when necessary andreplacethemwhenthe

maintenance requiringtheir removaliscomplete.

Always use thegreatestcarewhenworkingnearmoving

parts.

___________________________________________________

1.f. Do not putyourh

andsneartheenginefan.

Do notattempttooverridethegovernoror

idler by pushing on thethrottlecontrolrods

while theengineisrunning.

___________________________________________________

1.g. To prevent accidentally starting gasoline engines while

turning theengin

eorweldinggeneratorduringmaintenance

work, disconnect thesparkplugwires,distributorcap or

magneto wire as appropriate.

SAFETY

ARC WELDING CANBEHAZARDOUS. PROTECTYOURSELF AND OTHERS FROM POSSIBLE SERIOUS INJURY OR DEATH.

KEEP CHILDRENAWAY.PACEMAKERWEARERS SHOULD CONSULT WITH THEIR DOCTOR BEFORE OPERATING.

Read andunderstandthefollowingsafetyhighlights.Foradditional safety information, it is strongly recommended that you

purchase a copy of “Safety in Welding & Cutting - ANSI Standard Z49.1” from theAmericanWelding Society, P .O. Box 351040,

Miami, Florida33135orCSAStandardW117.2-1974.AFreecopyof“ArcWelding Safety” booklet E205isavailable from the

Lincoln Electric Company, 22801 St.ClairAvenue,Cleveland,Ohio 44117-1199.

BE SURE THAT ALL INSTALLATION, OPERATION, MAINTENANCE AND REPAIR PROCEDURESARE

PERFORMED ONLY BY QUALIFIED INDIVIDUALS.

WARNING

ELECTRIC AND

MAGNETIC FIELDS

maybedangerous

2.a. Electric currentflowingthrough any conductor causes

localizedElectric and Magnetic Fields (EMF). Welding

currentcreates EMF fieldsaround welding cables and

welding machines

2.b. EMF fields may interfere with some pacemakers, and

welders having a pacemaker should consult their physician

before welding.

2.c. Exposure to EMFfieldsinweldingmayhaveotherhealth

effects which are now notknown.

2.d. Allweldersshoulduse thefollowingproceduresinorderto

minimize exposure to EMFfieldsfromtheweldingcircuit:

2.d.1.

Route the electrode and workcablestogether - Secure

them with tape when possible.

2.d.2. Never coiltheelectrode lead around your body.

2.d.3. Do notplaceyourbodybetweentheelectrodeand

work cables. If theelectrodecableisonyourright

side, theworkcableshouldalsobeonyourrightside.

2.d.4. Connect theworkcabletotheworkpieceascloseas

possible to theareabeingwelded.

2.d.5. Do notworknexttoweldingpowersource.

1.h. To avoid scalding, do notremovethe

radiator pressure capwhentheengineis

hot.

For Diesel Engines: Diesel engine exhaust and

some of itsconstituentsareknowntotheState

of California to cause cancer, birth defects, and

other reproductive harm.

For Gasoline Engines: The engine exhaust from

this product contains chemicals knowntothe

StateofCaliforniatocause cancer, birth defects,

or other reproductive harm.

CALIFORNIAPROPOSITION65WARNINGS

• Sales and Service through Subsidiaries and Distributors Worldwide •

Cleveland, Ohio 44117-1199 U.S.A. TEL: 216.481.8100 FAX: 216.486.1751 WEB SITE: www.lincolnelectric.com

• World's Leader in Welding and Cutting Products •

MAGNUM

PRO 100SG SPOOL GUN

OPERATOR’S MANUAL

IMT10137

November, 2012

Safety Depends on You

Lincoln arc welding and cutting

equipment is designed and built

with safety in mind. However,

your overall safety can be

increased by proper installation ...

and thoughtful operation on your

part. DO NOT INSTALL, OPER-

ATE OR REPAIR THIS EQUIP-

MENT WITHOUT READING

THIS MANUAL AND THE

SAFETY PRECAUTIONS CON-

TAINED THROUGHOUT. And,

most importantly, think before you

act and be careful.

Produkt Specifikationer

Mærke:	Lincoln Electric
Kategori:	Ikke kategoriseret
Model:	Magnum Pro 100SG

Har du brug for hjælp?

Hvis du har brug for hjælp til Lincoln Electric Magnum Pro 100SG stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Ikke kategoriseret Lincoln Electric Manualer

Lincoln Electric Magnum Pro 100SG Manual

23 September 2025

Lincoln Electric Utility Cart Manual

23 September 2025

Lincoln Electric Master Load 750 Manual

8 September 2025

Lincoln Electric LINCGUN PROMIG AIR Manual

8 September 2025

Lincoln Electric OMNIShield Faceshield Manual

7 September 2025

Lincoln Electric Linc-Cut 3015 CNC Fiber Laser Manual

20 Juli 2025

Lincoln Electric POWER MIG 255XT Manual

19 Juli 2025

Lincoln Electric LINCGUN PROMIG AIR 230T Manual

14 Marts 2025

Lincoln Electric LINCGUN PROMIG WATER 330W Manual

14 Marts 2025

Lincoln Electric VRTEX Engage Manual

11 Januar 2025

Ikke kategoriseret Manualer

Nyeste Ikke kategoriseret Manualer

Prebena 4C-Z50AUT Manual

23 September 2025

Prebena 1X-A16LM-AUT Manual

23 September 2025

Prebena 1GP-A16SDS Manual

23 September 2025

Prebena 4C-WD75 Manual

23 September 2025

Valcom V-9925A Manual

23 September 2025

Electrolux BISUPPORT Manual

23 September 2025

Hendi 211571 Manual

23 September 2025

Metro C515-CFC-L Manual

23 September 2025

EXSYS EX-44343 Manual

23 September 2025

Chefman RJ17-V2 Manual

23 September 2025