Lincoln Electric LINCGUN PROMIG WATER 330W Manual

Lincoln Electric Ikke kategoriseret LINCGUN PROMIG WATER 330W

Læs gratis den danske manual til Lincoln Electric LINCGUN PROMIG WATER 330W (8 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 22 personer og har en gennemsnitlig bedømmelse på 4.5 stjerner ud af 11.5 anmeldelser. Har du et spørgsmål om Lincoln Electric LINCGUN PROMIG WATER 330W, eller vil du spørge andre brugere om produktet?

Download PDF
Side 1/8
EN
1
LINCGUN® PROMIG™ Manual
WATER COOLED
W000345063-2 LINCGUN PROMIG 330W 3M
W000345064-2 LINCGUN PROMIG 330W 4M
W000345065-2 LINCGUN PROMIG 330W 5M
W000345069-2 LINCGUN PROMIG 400W 3M
W000345070-2 LINCGUN PROMIG 400W 4M
W000345071-2 LINCGUN PROMIG 400W 5M
W000345075-2 LINCGUN PROMIG 500W 3M
W000345076-2 LINCGUN PROMIG 500W 4M
W000345077-2 LINCGUN PROMIG 500W 5M
LINCGUN® PROMIG™
For additional languages please visit our website:
www.lincolnelectric.eu > Support > Operator manuals and spares EU
EN 2LINCGUN® PROMIG ™ Manual
THANK YOU FOR SELECTING A QUALITY PRODUCT BY LINCOLN ELECTRIC.
SAFETY INSTRUCTIONS
This equipment have to be used by qualified personnel. Be sure that all installation, operation, maintenance and repair procedures are performed
only by qualified person. Read and understand this manual before operating this equipment. Failure to follow the instructions in this manual could
cause serious personal injury, loss of life, or equipment damage. Read and understand the following explanations of the warning symbols. Lincoln
Electric is not responsible for damages caused by improper installation, improper care or abnormal operation.
WARNING
WARNING: This symbol indicates that instructions must be followed to avoid serious personal injury, loss of life, or equipment damage.
Protect yourself and others from possible serious injury or death.
READ AND UNDERSTAND INSTRUCTIONS: Read and understand this manual before operating this equipment. Arc welding can be
hazardous. Failure to follow the instructions in this manual could cause serious personal injury, loss of life, or equipment damage.
Before any internal verifications and repair work, make sure that the equipment is separated from the electric installation by electrical
isolation (by electrical isolation is meant a group of operations designed
to separate and keep the equipment de-energized).
ELECTRIC SHOCK CAN KILL: Welding equipment generates high voltages. Do not touch the electrode, work clamp, or connected work
pieces when this equipment is turned on. Insulate yourself from the electrode, work clamp, and connected work pieces.
ELECTRICALLY POWERED EQUIPMENT: Regularly inspect the input, electrode, and work clamp cables. If any insulation damage exists
replace the cable immediately. Do not place the electrode holder directly on the welding table or any other surface in contact with the
work clamp to avoid the risk of accidental arc ignition. At least every six months, you must check the proper condition of the insulation
and connections of the electric equipment and accessories
such as plugs, flexible wires, ducts, connectors, extension leads, part holders, electrode-holders, or torches etc.
ELECTROMAGNETIC FIELD MAY BE DANGEROUS: Electric current flowing through any conductor creates electromagnetic field (EMF).
EMF fields may interfere with some pacemakers, and welders having a pacemaker shall consult their physician before operating
his equipment.
Never wrap the welding/cutting cable round your body or rest it on your shoulder;
CE COMPLIANCE: This equipment complies with the European Community Directives.
ARTIFICIAL OPTICAL RADIATION: According with the requirements in 2006/25/EC Directive and
EN 12198 Standard, the equipment is a category 2. It makes mandatory the adoption of Personal Protective Equipment (PPE) having
filter with a protection degree up to a maximum of 15, as required by EN169 Standard.
FUMES AND GASES CAN BE DANGEROUS: Welding may produce fumes and gases hazardous to health. Avoid breathing these fumes
and gases. To avoid these dangers the operator must use enough ventilation or exhaust to keep fumes and gases away from
the breathing zone.
ARC RAYS CAN BURN: Use a shield with the proper filter and cover plates to protect your eyes from sparks and the rays of the arc when
welding or observing. To protect the skin, use suitable clothing made of durable, fireproof material. Protect other nearby personnel
with suitable, non-flammable screening and warn them not to watch the arc nor expose themselves to the arc.
WELDING SPARKS CAN CAUSE FIRE OR EXPLOSION: Remove fire hazards from the welding area and have a fire extinguisher easily
accessible. Welding sparks and hot materials from the welding process can easily go through small cracks and openings to adjacent
areas. Do not weld on any tanks, drums, containers, or material until the proper steps have been taken to insure that no flammable
or toxic vapors will be present. Never use this equipment when flammable gases, vapors or flammable liquids are present.
WELDED MATERIALS CAN BURN: Welding generates a large amount of heat. Hot surfaces and materials in work area can cause serious
burns. Use gloves and pliers when touching or moving materials in the work area.
CYLINDER MAY EXPLODE IF DAMAGED: Use only certificate, compressed gas cylinders containing the correct shielding gas for the
process used and properly operating regulators designed for the gas and pressure used. Always keep cylinders in an upright position
securely chained to a fixed support. Do not move or transport gas cylinders with the protection cap removed. Do not allow the
electrode, electrode holder, work clamp or any other electrically live part to touch a gas cylinder. Gas cylinders must be located away
from areas where they may be subjected to physical damage or the welding process including sparks and heat sources.
HOT COOLANT CAN BURN SKIN: Always be sure coolant is NOT HOT before servicing the cooler.
The manufacturer reserves the right to make changes and/or improvements in design without upgrade at the same time the operator’s manual.

Produkt Specifikationer

Mærke: Lincoln Electric
Kategori: Ikke kategoriseret
Model: LINCGUN PROMIG WATER 330W

Har du brug for hjælp?

Hvis du har brug for hjælp til Lincoln Electric LINCGUN PROMIG WATER 330W stil et spørgsmål nedenfor, og andre brugere vil svare dig


Ikke kategoriseret Lincoln Electric Manualer

Lincoln Electric

Lincoln Electric Linc-Cut 3015 CNC Fiber Laser Manual

20 Juli 2025
Lincoln Electric

Lincoln Electric POWER MIG 255XT Manual

19 Juli 2025
Lincoln Electric

Lincoln Electric LINCGUN PROMIG AIR 230T Manual

14 Marts 2025
Lincoln Electric

Lincoln Electric LINCGUN PROMIG WATER 330W Manual

14 Marts 2025
Lincoln Electric

Lincoln Electric VRTEX Engage Manual

11 Januar 2025
Lincoln Electric

Lincoln Electric CHAMELEON 3V0 Manual

4 Januar 2025
Lincoln Electric

Lincoln Electric Prism Wall Mount Manual

9 December 2024
Lincoln Electric

Lincoln Electric COOLERTIG 4 Manual

9 December 2024
Lincoln Electric

Lincoln Electric Oil Guardian Manual

9 December 2024
Lincoln Electric

Lincoln Electric Inferno Torch KH825 Manual

9 December 2024

Ikke kategoriseret Manualer

Nyeste Ikke kategoriseret Manualer

Rowenta

Rowenta Gourmet OC3751 Manual

14 August 2025
Renkforce

Renkforce RF-HSA-200 Manual

14 August 2025
American Audio

American Audio Gobo Flash 4 Manual

14 August 2025
Candy

Candy CIS633CMTTWIFI Manual

14 August 2025
EnGenius

EnGenius ECW536 Manual

14 August 2025
Master

Master TH 5 Manual

14 August 2025
Hisense

Hisense HRCF200 Manual

14 August 2025
American Audio

American Audio DJ Spot LED Manual

14 August 2025
American Audio

American Audio CDG-350 Manual

14 August 2025
Tefal

Tefal Inicio FV1243 Manual

14 August 2025