Lincoln Electric Magnum 400 Dual Procedure Manual

Lincoln Electric Ikke kategoriseret Magnum 400 Dual Procedure

Læs gratis den danske manual til Lincoln Electric Magnum 400 Dual Procedure (30 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 67 personer og har en gennemsnitlig bedømmelse på 4.7 stjerner ud af 34 anmeldelser. Har du et spørgsmål om Lincoln Electric Magnum 400 Dual Procedure, eller vil du spørge andre brugere om produktet?

Download PDF
Side 1/30
Operator’s Manual
Register your machine:
www.lincolnelectric.com/register
Authorized Service and Distributor Locator:
www.lincolnelectric.com/locator
IM646-A | Issue D ate Apr-12
© Lincoln Global, Inc. All Rights Reserved.
For use with machines having Code Numbers:
K574
K1722
Save for future reference
Date Purchased
Code: (ex: 10859)
Serial: (ex: U1060512345)
MAGNUM
®
400 Dual Procedure
GMA Gun & Cable Assemblies
IEC 60974-7
GB 15579.7: 2013
THANK YOU FOR SELECTING
A QUALITY PRODUCT BY
LINCOLN ELEC TRIC.
Please examine Carton and equiPment For
damage immediately
When this equipment is shipped, title passes to the purchaser upon
receipt by the carrier. Consequently, claims for material damaged in
shipment must be made by the purchaser against the transportation
company at the time the shipment is received.
saFety dePends on you
Lincoln arc welding and cutting equipment is designed and built with
safety in mind. However, your overall safety can be increased by
proper installation ... and thoughtful operation on your part.
DO NOT INSTALL, OPERATE OR REPAIR THIS EQUIPMENT
WITHOUT READING THIS MANUAL AND THE SAFETY PRECAUTIONS
CONTAINED THROUGHOUT. And, most importantly, think before you
act and be careful.
This statement appears where the information must be followed
exactly to avoid serious personal injury or loss of life.
This statement appears where the information must be followed to
avoid minor personal injury or damage to this equipment.
KeeP your head out oF the Fumes.
DON’T get too close to the arc. Use
corrective lenses if necessary to
s
tay a reasonable distance away
from the arc.
READ and obey the Material Safety
Data Sheet (MSDS) and the warning
label that appears on all containers
of welding materials.
USE ENOUGH VENTILATION or
exhaust at the arc, or both, to keep
the fumes and gases from your breathing zone and the general area.
IN A LARGE ROOM OR OUTDOORS, natural ventilation may be
adequate if you keep your head out of the fumes (See below).
USE NATURAL DRAFTS or fans to keep the fumes away from your
face.
If you de velop unusual symptoms, see your supervisor. Perhaps the
welding atmosphere and ventilation system should be checked.
wear CorreCt eye, ear & body ProteCtion
PROTECT your eyes and face with welding helmet
properly fitted and with proper grade of filter plate
(See ANSI Z49.1).
PROTECT your body from welding spatter and arc
flash with protective clothing including woolen
clothing, flame-proof apron and gloves, leather
leggings, and high boots.
PROTECT others from splatter, flash, and glare with
protective screens or barriers.
IN SOME AREAS, protection from noise may be
appropriate.
BE SURE protective equipment is in good condition.
Also, wear safety glasses in work area AT ALL
TIMES.
SPECIAL SITUATIONS
DO NOT WELD OR CUT containers or materials which previously had
been in contact with hazardous substances unless they are properly
cleaned. This is extremely dangerous.
DO NOT WELD OR CUT painted or plated parts unless special
precautions with ventilation have been taken. They can release highly
toxic fumes or gases.
Additional precautionary measures
PROTECT compressed gas cylinders from excessive heat, mechanical
shocks, and arcs; fasten cylinders so they cannot fall.
BE SURE cylinders are never grounded or part of an electrical circuit.
REMOVE all potential fire hazards from welding area.
ALWAYS HAVE FIRE FIGHTING EQUIPMENT READY FOR
IMMEDIATE USE AND KNOW HOW TO USE IT.
WARNING
CAUTION

Produkt Specifikationer

Mærke: Lincoln Electric
Kategori: Ikke kategoriseret
Model: Magnum 400 Dual Procedure

Har du brug for hjælp?

Hvis du har brug for hjælp til Lincoln Electric Magnum 400 Dual Procedure stil et spørgsmål nedenfor, og andre brugere vil svare dig


Ikke kategoriseret Lincoln Electric Manualer

Lincoln Electric

Lincoln Electric NA-3 Manual

24 September 2025
Lincoln Electric

Lincoln Electric VRTEX 360 Manual

24 September 2025
Lincoln Electric

Lincoln Electric VRTEX Mobile Manual

24 September 2025
Lincoln Electric

Lincoln Electric Easy MIG 140 Manual

23 September 2025
Lincoln Electric

Lincoln Electric Magnum Pro 100SG Manual

23 September 2025
Lincoln Electric

Lincoln Electric Utility Cart Manual

23 September 2025
Lincoln Electric

Lincoln Electric Master Load 750 Manual

8 September 2025
Lincoln Electric

Lincoln Electric LINCGUN PROMIG AIR Manual

8 September 2025
Lincoln Electric

Lincoln Electric OMNIShield Faceshield Manual

7 September 2025
Lincoln Electric

Lincoln Electric Linc-Cut 3015 CNC Fiber Laser Manual

20 Juli 2025

Ikke kategoriseret Manualer

Nyeste Ikke kategoriseret Manualer

Structural Concepts

Structural Concepts Reveal NE3620HSSV Manual

2 Oktober 2025
Advantech

Advantech FWA-4030 Manual

2 Oktober 2025
Vestil

Vestil ULTT-5448-6-YEL230-1 Manual

2 Oktober 2025
TC Electronic

TC Electronic Duplicator Manual

2 Oktober 2025
Axxess

Axxess AXTC-HN1 Manual

2 Oktober 2025
Structural Concepts

Structural Concepts Reveal NE3635RSSV Manual

2 Oktober 2025
Structural Concepts

Structural Concepts Fusion GP541RRLB Manual

2 Oktober 2025
Dillinger Labs

Dillinger Labs StreetHeart SKAA Pro Manual

2 Oktober 2025
Draper

Draper 02931 Manual

2 Oktober 2025
Mirage

Mirage 74110240 Manual

2 Oktober 2025